F/S: Intake, Ram Horn Exhaust, Overflow Tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 01-10-2009, 04:39 PM

Edelbrock TM-1 4BBL Aluminum Intake. Freshly glass beaded, NO cracks or stripped/repaired thread holes. Great for street/strip sbc intake. Fits 265 thru 400 small block $75.00 plus shipping

Straight Dump rams horn exhaust, not sure what year but will fit 4x4, all studs intact, need a glass bead, no cracks found. $50.00 plus shipping

Modified w/s washer tank with GM cap. Mount to pass. side and hook to your radiator for overflow catch. Matches the stock driver side w/s washer tank. Complete with bracket and bottle. $25.00 plus shipping

Sorry, post wrong pic on the w/s washer tank. The last pic is plain w/s washer tank. Also for sale but $18 shipped.

**Ironhorse** · 01-10-2009, 04:44 PM

Correct pic of overflow tank with GM return and vent cap. $25.00 plus shipping

kcvrodder · 01-10-2009, 04:49 PM

does the overflow tank come with the vent cap? How much to ship to 66030

**Ironhorse** · 01-10-2009, 05:37 PM

Yes, It comes with the vent cap as pictured. I also have the mounting screws (coarse thread bolts) but they did not get painted. The vent cap is no longer available from GM but I was able to score two before they became obsolete. Built one for my truck but have not mounted yet as truck is in storage off-site for winter. Shipping cost is $5.00 to your door via USPS parcel post. UPS cost from on-line was almost double, ???? .... crazy!!

kcvrodder · 01-10-2009, 05:43 PM

Ok I'll take it. How do you want your money? Where is wellington kansas? How far from Gardner kansas

**Ironhorse** · 01-10-2009, 06:22 PM

Wellington is about 30 miles south of Wichita. Where 'bouts is Gardner? Sending a PM with payment info.

**Ironhorse** · 01-11-2009, 09:51 AM

ttt

Overflow tank SOLD, pending payment from kcvrodder. Thanks

Turbo85GMC · 04-28-2009, 10:46 AM

Hi, Do you know if the rams horn manifolds are 2" or 2.5"? Or do they have casting #'s?

**Ironhorse** · 04-28-2009, 06:55 PM

To be honest I believe they are 2" as only the true Corvette factory exhausts were 2.5" if I recall. Will have to dig them out of the parts shed when I get home from work tomorrow. They do have a part number on them but don't have it at the moment. Will post it tomorrow also.

**michael bustamante** · 04-29-2009, 02:01 AM

what would shipping the intake manifold be to NM?

**Ironhorse** · 04-29-2009, 07:32 AM

Mike, Sorry but everything but the 4x4 exhaust manifolds has been sold.
Tried to edit as such but did not get it done and forgot to try again. All the items sold in January and figured such an old post no sense in editing at this late date.

**michael bustamante** · 04-29-2009, 10:13 AM

thats ok. it never hurts to ask.

**Ironhorse** · 04-29-2009, 06:27 PM

Turbo85GMC, Found the exhausts and came up with these PN's. Went to the Chevymainia website and found this info:

RH 3872778 66-68 Corvette, Passenger Car and Truck: fits 283, 307 & 327 195, 200, 250, 275, 300 and 375 HP 2" with A.I.R. tube fittings

LH 3872765 67-71 Corvette 300, 330, 350 and 370 HP 2" with A.I.R. tube fittings

All the fitting threads are good with plugs fitted except the two center fittings on the right hand exhaust. For whatever reason they have been welded shut. Don't think it would be a problem unless doing a "correct" points restoration. Left hand exhaust has accessory mounting boss.

Any questions you have will do my best to answer. Guess I learned something about the Corvette factory cast exhausts.

01-10-2009, 04:39 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	F/S: Intake, Ram Horn Exhaust, Overflow Tank Edelbrock TM-1 4BBL Aluminum Intake. Freshly glass beaded, NO cracks or stripped/repaired thread holes. Great for street/strip sbc intake. Fits 265 thru 400 small block $75.00 plus shipping Straight Dump rams horn exhaust, not sure what year but will fit 4x4, all studs intact, need a glass bead, no cracks found. $50.00 plus shipping Modified w/s washer tank with GM cap. Mount to pass. side and hook to your radiator for overflow catch. Matches the stock driver side w/s washer tank. Complete with bracket and bottle. $25.00 plus shipping Sorry, post wrong pic on the w/s washer tank. The last pic is plain w/s washer tank. Also for sale but $18 shipped. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 08-11-2010 at 10:00 PM.

01-10-2009, 04:44 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank Correct pic of overflow tank with GM return and vent cap. $25.00 plus shipping __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 08-11-2010 at 10:00 PM.

01-10-2009, 04:49 PM	#3
kcvrodder Stroke her once for me! Join Date: Nov 2007 Location: Gardner,Kansas Posts: 84	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank does the overflow tank come with the vent cap? How much to ship to 66030

01-10-2009, 05:37 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank Yes, It comes with the vent cap as pictured. I also have the mounting screws (coarse thread bolts) but they did not get painted. The vent cap is no longer available from GM but I was able to score two before they became obsolete. Built one for my truck but have not mounted yet as truck is in storage off-site for winter. Shipping cost is $5.00 to your door via USPS parcel post. UPS cost from on-line was almost double, ???? .... crazy!! __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-10-2009, 05:43 PM	#5
kcvrodder Stroke her once for me! Join Date: Nov 2007 Location: Gardner,Kansas Posts: 84	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank Ok I'll take it. How do you want your money? Where is wellington kansas? How far from Gardner kansas

01-10-2009, 06:22 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank Wellington is about 30 miles south of Wichita. Where 'bouts is Gardner? Sending a PM with payment info. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-11-2009, 09:51 AM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank ttt Overflow tank SOLD, pending payment from kcvrodder. Thanks __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-28-2009, 10:46 AM	#8
Turbo85GMC Registered User Join Date: Apr 2005 Location: Medford, MA Posts: 307	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank Hi, Do you know if the rams horn manifolds are 2" or 2.5"? Or do they have casting #'s? __________________ '85 GMC 1500 "Friends don't let friends drive stock!"

04-28-2009, 06:55 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank To be honest I believe they are 2" as only the true Corvette factory exhausts were 2.5" if I recall. Will have to dig them out of the parts shed when I get home from work tomorrow. They do have a part number on them but don't have it at the moment. Will post it tomorrow also. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-29-2009, 02:01 AM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank what would shipping the intake manifold be to NM? __________________ 1967custom Last edited by michael bustamante; 04-29-2009 at 02:01 AM.

04-29-2009, 07:32 AM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank Mike, Sorry but everything but the 4x4 exhaust manifolds has been sold. Tried to edit as such but did not get it done and forgot to try again. All the items sold in January and figured such an old post no sense in editing at this late date. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-29-2009, 10:13 AM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank thats ok. it never hurts to ask. __________________ 1967custom

04-29-2009, 06:27 PM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	Re: F/S: Intake, Ram Horn Exhaust, Overflow Tank Turbo85GMC, Found the exhausts and came up with these PN's. Went to the Chevymainia website and found this info: RH 3872778 66-68 Corvette, Passenger Car and Truck: fits 283, 307 & 327 195, 200, 250, 275, 300 and 375 HP 2" with A.I.R. tube fittings LH 3872765 67-71 Corvette 300, 330, 350 and 370 HP 2" with A.I.R. tube fittings All the fitting threads are good with plugs fitted except the two center fittings on the right hand exhaust. For whatever reason they have been welded shut. Don't think it would be a problem unless doing a "correct" points restoration. Left hand exhaust has accessory mounting boss. Any questions you have will do my best to answer. Guess I learned something about the Corvette factory cast exhausts. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.