I got a 68 custom/10 longbed today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*bisquik65* · 07-06-2005, 05:59 PM

This truck needs a motor/trans everything else is there all the grille trim and hood and other fender are in the bed,It will be up f/s as soon as it is driveable....What do you think? Very little rust..

70 shorty · 07-06-2005, 06:22 PM

I think I'm already interested. Is it set up for a stick or auto?

*bisquik65* · 07-06-2005, 06:26 PM

It was a V8 truck 3 speed,but i can make it auto th350...I have a 76 350 4bbl to put in it,3 speed or th350 eather way if you are interested,and i will get alot more pics of it too..Erick

meathead95 · 07-06-2005, 06:42 PM

how much im looking for a beater

*bisquik65* · 07-06-2005, 08:09 PM

pics of 68

*bisquik65* · 07-06-2005, 08:12 PM

More pics of 68

*bisquik65* · 07-06-2005, 08:16 PM

round 3 dont like the hole they cut in the floor tunnel,but it can be fixed..

*bisquik65* · 07-06-2005, 08:19 PM

last few pics

70 shorty · 07-06-2005, 08:45 PM

from the pics it looks like more rust than I was thinking of. Now, about that 65 Biscayne you posted a pic of...........

*bisquik65* · 07-06-2005, 09:39 PM

Quote:

Originally Posted by 70 shorty

from the pics it looks like more rust than I was thinking of. Now, about that 65 Biscayne you posted a pic of...........

Come on now,After all thats not to bad rust. for a 68?

And the 65 biscayne

MY CAR

If you want to see rust, the 93 astro van behind the truck has no rockers,gas tank,brake lines,exhaust,or bottom 10 inches of the sliding door...No kidding and its a 93

1STtimePRo'71 · 07-06-2005, 10:46 PM

It's nicer than mine. Too bad it's for sale otherwise you would tell us what you payed for it!!! I'm interested though. Always wanted a 68.

*bisquik65* · 07-07-2005, 10:57 AM

Quote:

Originally Posted by 1STtimePRo'71

It's nicer than mine. Too bad it's for sale otherwise you would tell us what you payed for it!!! I'm interested though. Always wanted a 68.

I bought 10 trucks ,all 73-87 and this was the only 67-72 there,I needed more parts to sell and the others are not this good..And i have to many myself,I have motors/trannys all around here,so i will make it a good driver truck...And move it...I dont want to part it out , it looks to good and i will fix the small rust things...not bad for a 68 thats been here in western n.c. all its life..These are about all gone from this area...
I had to give good $$ to get all these witch i really didn't have right now,i sold 3 cars and traded some motor home stuff too....

70 shorty · 07-07-2005, 01:10 PM

Hey Erick dont' get me wrong, it's 10 times nicer rust wise than my truck. I'm just thinkning that maybe I should try to find a basically completely rust free truck. I won't spend any money fixing the rust on my cab. Both rockers on mine are non existant, both cab corners gone, rust on the firewall, and over the windsheild inside. I also prefer the 67-68 trucks, I like that front end better.

*bisquik65* · 07-07-2005, 03:44 PM

Quote:

Originally Posted by 70 shorty

Hey Erick dont' get me wrong, it's 10 times nicer rust wise than my truck. I'm just thinkning that maybe I should try to find a basically completely rust free truck. I won't spend any money fixing the rust on my cab. Both rockers on mine are non existant, both cab corners gone, rust on the firewall, and over the windsheild inside. I also prefer the 67-68 trucks, I like that front end better.

I wasn't hollering at what you said,sorry if it sounded that way..I know it needs some work and i am going to fix it all and save this good looking truck..I have everything here to make it run again..so it will get done soon..I have to invest my time and money in something,I love old trucks

My 69 CST was a longbed when i bought it in 1985 ,its now on a shortbed frame,but changed my mind,now it going to be on a rollback...A cool old truck with tach,tilt,a/c on a newer 77 chassis..454/400 Retro rollback..

panhandler62 · 07-07-2005, 02:16 PM

Are you married to the idea of getting it running and selling the unit or would you consider parting it?

I could sure use a pair of rocker trim! (My 68 came with about 2/3 of the driver's side trim and nothing on the passenger side.)

The grill looks nice also.. but that might be too rich for my current budget comitments.

I notice that the same support memebrs under the cab are rotted as under mine.

*bisquik65* · 07-07-2005, 03:46 PM

I am going to fix the rust,before it gets really bad,new cab mounts,ect and get it running...So i wont part it,unless i really have to let it go ...but i dont think that will happen..

Quote:

Originally Posted by panhandler62

Are you married to the idea of getting it running and selling the unit or would you consider parting it?

I could sure use a pair of rocker trim! (My 68 came with about 2/3 of the driver's side trim and nothing on the passenger side.)

The grill looks nice also.. but that might be too rich for my current budget comitments.

I notice that the same support memebrs under the cab are rotted as under mine.

70 shorty · 07-07-2005, 09:00 PM

Erick, I didn't think you were hollering, just didn't want you to think I was slamming your truck. Actually once you get the rust fixed, I am interested. Feel free to PM me. I say that because I no idea how to weld, so I know my money is better spent on one that doesnt' need any rust repair rather than paying someone else to do rust repair.

Pete

*bisquik65* · 07-07-2005, 09:31 PM

Quote:

Originally Posted by 70 shorty

Erick, I didn't think you were hollering, just didn't want you to think I was slamming your truck. Actually once you get the rust fixed, I am interested. Feel free to PM me. I say that because I no idea how to weld, so I know my money is better spent on one that doesnt' need any rust repair rather than paying someone else to do rust repair.

Pete

Ok i will pm you ,it will be a while before its get fixed,I have plenty of cars here for work,3 motors and 2 transmissions are waiting here right now. But then its time for this..Later,Erick

07-06-2005, 05:59 PM	#1
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I got a 68 custom/10 longbed today This truck needs a motor/trans everything else is there all the grille trim and hood and other fender are in the bed,It will be up f/s as soon as it is driveable....What do you think? Very little rust.. Attached Images

07-06-2005, 06:22 PM	#2
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	I think I'm already interested. Is it set up for a stick or auto? __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

07-06-2005, 06:42 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	how much im looking for a beater __________________ 72 2wd blazer 72 swb 4x4

07-06-2005, 08:09 PM	#5
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	pics of 68 Attached Images

07-06-2005, 08:12 PM	#6
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	More pics of 68 Attached Images

07-06-2005, 06:26 PM	#3
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	It was a V8 truck 3 speed,but i can make it auto th350...I have a 76 350 4bbl to put in it,3 speed or th350 eather way if you are interested,and i will get alot more pics of it too..Erick

07-06-2005, 08:16 PM	#7
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	round 3 dont like the hole they cut in the floor tunnel,but it can be fixed.. Attached Images

07-06-2005, 08:19 PM	#8
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	last few pics Attached Images

07-06-2005, 08:45 PM	#9
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	from the pics it looks like more rust than I was thinking of. Now, about that 65 Biscayne you posted a pic of........... __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

07-06-2005, 10:46 PM	#11
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	It's nicer than mine. Too bad it's for sale otherwise you would tell us what you payed for it!!! I'm interested though. Always wanted a 68. __________________ -Cory 1967 2 Wheel Chevy

07-07-2005, 01:10 PM	#13
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Hey Erick dont' get me wrong, it's 10 times nicer rust wise than my truck. I'm just thinkning that maybe I should try to find a basically completely rust free truck. I won't spend any money fixing the rust on my cab. Both rockers on mine are non existant, both cab corners gone, rust on the firewall, and over the windsheild inside. I also prefer the 67-68 trucks, I like that front end better. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

07-07-2005, 02:16 PM	#15
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Are you married to the idea of getting it running and selling the unit or would you consider parting it? I could sure use a pair of rocker trim! (My 68 came with about 2/3 of the driver's side trim and nothing on the passenger side.) The grill looks nice also.. but that might be too rich for my current budget comitments. I notice that the same support memebrs under the cab are rotted as under mine.

07-07-2005, 09:00 PM	#17
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Erick, I didn't think you were hollering, just didn't want you to think I was slamming your truck. Actually once you get the rust fixed, I am interested. Feel free to PM me. I say that because I no idea how to weld, so I know my money is better spent on one that doesnt' need any rust repair rather than paying someone else to do rust repair. Pete __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.