MN Parting out: 68 chevy custom 1/2 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 05-13-2016, 04:17 PM

This thing is in poor shape. There are no body panels worth saving. I will only be shipping about every third day so if you need parts in a hurry, this may not be it. None of these parts are new, or like new. No shipping on large or heavy items, Shipping is extra.

$650 as it sits.

The choke cable with knob, Radio, and heater controls with cables are spoken for.

15" split rims, $50 for all 4
Door panels will clean up ok I think, not sure if the screws will come out nicely. $75 with the arm rests.
Glove box door with hinge and knob. $15
Ash tray assembly. $15
Gauges look decent. $50
4 speed trans. $75
292, turns over. $500
Headlight bezels. (one screw pulled through)$35
Hood letters. $30
Power mirrors, working condition unknown. $100
Steering wheel fair shape. $60
Column looks ok. $100

Ask about anything else.

**too much stuff** · 05-13-2016, 04:20 PM

More pics.
This will probably be off to scrap within 2 weeks...

**Chevy Fan Always** · 05-13-2016, 04:26 PM

Is that gas cap dented? Hard to tell in the picture, I might be interested in that.

**too much stuff** · 05-13-2016, 04:29 PM

Quote:

Originally Posted by Chevy Fan Always

Is that gas cap dented? Hard to tell in the picture, I might be interested in that.

Yes it has some dents in it.

Steve Cole · 05-13-2016, 04:58 PM

Interested in the stainless windshield trim. What condition is it in? Price shipped to 28027 ?

Thanks, Steve

**1968k20** · 05-13-2016, 09:37 PM

How much for radio to 96020 California?

Dustytrix · 05-13-2016, 10:28 PM

Interested in those stainless grill hoops, can you see what shape they are in? Its hard to tell from picture.

chainsawman · 05-13-2016, 10:56 PM

how much for the hood latch shipped to 21037?

**too much stuff** · 05-13-2016, 11:13 PM

I will check the parts asked about tomorrow.

I know the grill hoops had a few light dings.

**68bowtie** · 05-14-2016, 12:00 AM

is there a center seat belt pair?

*Silver68* · 05-14-2016, 02:10 AM

Condition of interior rear view mirror, gas pedal, shifter knob ? Pricing shipped to 92020 Thanks

*Silver68* · 05-14-2016, 02:22 AM

I'll take the ash tray assy pending close up pictures of front, shipping 92020

**NGN** · 05-14-2016, 08:11 AM

How much for the dash? Is it in good condition? No cracks? May be some pic's please? How much would it be to ship to 08857? Thanks, NGN Son.

**special-K** · 05-14-2016, 09:02 AM

Shift lever to 21771? How are those headlight doors? I'll have to check which side, but I have one good (no dings) side and only need the other side to be the same.

That thing had a sexy mirror upgrade! 2016 has nothing on those...back in their day.

**BIG ORANGE** · 05-14-2016, 10:43 AM

Close up pic of dash pad and steering wheel.. And the sleeve on the steering column where the shifter lever would mount if your willing to part out.

jaybatta · 05-14-2016, 11:38 AM

Is the taillight trim a 67/8? Looks like a 69-72. Pending pictures I'd be interested if they're for a 68, and if you can remove them and the clips....I swear you need to be an engineer to remove them. Shipping to 99208.

Thanks!

Joe

**too much stuff** · 05-14-2016, 01:40 PM

Quote:

Originally Posted by Steve Cole

Interested in the stainless windshield trim. What condition is it in? Price shipped to 28027 ?
Confirmed that it does have a couple of dings in it. I have not had any luck shipping these pieces in the past due to size.

Quote:

Originally Posted by Dustytrix

Interested in those stainless grill hoops, can you see what shape they are in? Its hard to tell from picture.

Overall would be good drivers. A couple of light scuffs and dings and typical road wear from years of use. $70 plus shipping

Quote:

Originally Posted by chainsawman

how much for the hood latch shipped to 21037?

Hood latch works fine, will need painting. $35 shipped for what is in the pic.

Quote:

Originally Posted by 68bowtie

is there a center seat belt pair?

Nope, sorry.

Quote:

Originally Posted by Silver68

Condition of interior rear view mirror, gas pedal, shifter knob ? Pricing shipped to 92020 Thanks

Rear view is not correct, don't recall the gas pedal condition. Shifter knob is $18 shipped as pictured.

Quote:

Originally Posted by Silver68

I'll take the ash tray assy pending close up pictures of front, shipping 92020

Works good, should clean up. $30 shipped.

Quote:

Originally Posted by NGN

How much for the dash? Is it in good condition? No cracks? May be some pic's please? How much would it be to ship to 08857? Thanks, NGN Son.

The dash is coming loose and will need to investigate more when I get in that far. The ends are curling some.

Quote:

Originally Posted by special-K

Shift lever to 21771? How are those headlight doors? I'll have to check which side, but I have one good (no dings) side and only need the other side to be the same.

That thing had a sexy mirror upgrade! 2016 has nothing on those...back in their day.

Tim, bezels will be decent, but each one has a little ding and pass side has the lower 2 screws pulled through. Check out the pics.

Quote:

Originally Posted by BIG ORANGE

Close up pic of dash pad and steering wheel.. And the sleeve on the steering column where the shifter lever would mount if your willing to part out.

Waiting on the dash pad to verify condition. Added steering wheel pics. Not planning on taking the column apart as of now.

Quote:

Originally Posted by jaybatta

Is the taillight trim a 67/8? Looks like a 69-72. Pending pictures I'd be interested if they're for a 68, and if you can remove them and the clips....I swear you need to be an engineer to remove them. Shipping to 99208.

Thanks!

Joe

No 68 tail light trim on this one. I have never had luck removing them anyhow...

**too much stuff** · 05-14-2016, 01:42 PM

Mo pics....

**too much stuff** · 05-14-2016, 01:44 PM

Hoops...

**michael bustamante** · 05-14-2016, 02:20 PM

hows that hood moulding?

**BIG ORANGE** · 05-14-2016, 03:02 PM

I'm gonna pass on the st. wheel but wanna see pic's of the dash pad, need it for a build I'm doing on the cheap.
thanks
Donnie

**1968k20** · 05-14-2016, 04:14 PM

Radio?

*Silver68* · 05-14-2016, 04:36 PM

I'll pass on ashtray, looking for less corrosion Thanks

**too much stuff** · 05-14-2016, 05:41 PM

Quote:

Originally Posted by michael bustamante

hows that hood moulding?

Couple of dents in it.

Quote:

Originally Posted by BIG ORANGE

I'm gonna pass on the st. wheel but wanna see pic's of the dash pad, need it for a build I'm doing on the cheap.
thanks
Donnie

If it warms up I will check it out better. As I say, I think it is loose from the backing.

Quote:

Originally Posted by 1968k20

Radio?

I am not sure what it is exactly so I posted it as spoken for in the first post.

Quote:

Originally Posted by Silver68

I'll pass on ashtray, looking for less corrosion Thanks

No problem.

**1968k20** · 05-14-2016, 07:07 PM

Thanks, sorry! I didn't read the whole #1!

05-13-2016, 04:20 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Parting out: 68 chevy custom 1/2 ton More pics. This will probably be off to scrap within 2 weeks... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-13-2016, 04:26 PM	#3
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: Parting out: 68 chevy custom 1/2 ton Is that gas cap dented? Hard to tell in the picture, I might be interested in that.

05-13-2016, 04:58 PM	#5
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Parting out: 68 chevy custom 1/2 ton Interested in the stainless windshield trim. What condition is it in? Price shipped to 28027 ? Thanks, Steve

05-13-2016, 09:37 PM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: Parting out: 68 chevy custom 1/2 ton How much for radio to 96020 California? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

05-13-2016, 10:28 PM	#7
Dustytrix Registered User Join Date: Jan 2012 Location: Petal,Ms. Posts: 428	Re: Parting out: 68 chevy custom 1/2 ton Interested in those stainless grill hoops, can you see what shape they are in? Its hard to tell from picture.

05-13-2016, 04:17 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Parting out: 68 chevy custom 1/2 ton This thing is in poor shape. There are no body panels worth saving. I will only be shipping about every third day so if you need parts in a hurry, this may not be it. None of these parts are new, or like new. No shipping on large or heavy items, Shipping is extra. $650 as it sits. The choke cable with knob, Radio, and heater controls with cables are spoken for. 15" split rims, $50 for all 4 Door panels will clean up ok I think, not sure if the screws will come out nicely. $75 with the arm rests. Glove box door with hinge and knob. $15 Ash tray assembly. $15 Gauges look decent. $50 4 speed trans. $75 292, turns over. $500 Headlight bezels. (one screw pulled through)$35 Hood letters. $30 Power mirrors, working condition unknown. $100 Steering wheel fair shape. $60 Column looks ok. $100 Ask about anything else. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-13-2016, 10:56 PM	#8
chainsawman Registered User Join Date: Mar 2016 Location: edgewater,md. Posts: 39	Re: Parting out: 68 chevy custom 1/2 ton how much for the hood latch shipped to 21037?

05-13-2016, 11:13 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Parting out: 68 chevy custom 1/2 ton I will check the parts asked about tomorrow. I know the grill hoops had a few light dings. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-14-2016, 12:00 AM	#10
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,738	Re: Parting out: 68 chevy custom 1/2 ton is there a center seat belt pair? __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-14-2016, 02:10 AM	#11
Silver68 Account Suspended Join Date: Oct 2015 Location: Cali Posts: 141	Re: Parting out: 68 chevy custom 1/2 ton Condition of interior rear view mirror, gas pedal, shifter knob ? Pricing shipped to 92020 Thanks

05-14-2016, 02:22 AM	#12
Silver68 Account Suspended Join Date: Oct 2015 Location: Cali Posts: 141	Re: Parting out: 68 chevy custom 1/2 ton I'll take the ash tray assy pending close up pictures of front, shipping 92020

05-14-2016, 08:11 AM	#13
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 832	Re: Parting out: 68 chevy custom 1/2 ton How much for the dash? Is it in good condition? No cracks? May be some pic's please? How much would it be to ship to 08857? Thanks, NGN Son. Last edited by NGN; 05-14-2016 at 08:24 AM.

05-14-2016, 09:02 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Parting out: 68 chevy custom 1/2 ton Shift lever to 21771? How are those headlight doors? I'll have to check which side, but I have one good (no dings) side and only need the other side to be the same. That thing had a sexy mirror upgrade! 2016 has nothing on those...back in their day. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-14-2016, 10:43 AM	#15
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,754	Re: Parting out: 68 chevy custom 1/2 ton Close up pic of dash pad and steering wheel.. And the sleeve on the steering column where the shifter lever would mount if your willing to part out. __________________ Things happen for a reason!

05-14-2016, 11:38 AM	#16
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 838	Re: Parting out: 68 chevy custom 1/2 ton Is the taillight trim a 67/8? Looks like a 69-72. Pending pictures I'd be interested if they're for a 68, and if you can remove them and the clips....I swear you need to be an engineer to remove them. Shipping to 99208. Thanks! Joe __________________ Joe 1968 K20 1970 K20 Semper Fi



Register or Log In To remove these advertisements.

05-14-2016, 01:42 PM	#18
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Parting out: 68 chevy custom 1/2 ton Mo pics.... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-14-2016, 01:44 PM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Parting out: 68 chevy custom 1/2 ton Hoops... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-14-2016, 02:20 PM	#20
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Parting out: 68 chevy custom 1/2 ton hows that hood moulding? __________________ 1967custom

05-14-2016, 03:02 PM	#21
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,754	Re: Parting out: 68 chevy custom 1/2 ton I'm gonna pass on the st. wheel but wanna see pic's of the dash pad, need it for a build I'm doing on the cheap. thanks Donnie __________________ Things happen for a reason!

05-14-2016, 04:14 PM	#22
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: Parting out: 68 chevy custom 1/2 ton Radio? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

05-14-2016, 04:36 PM	#23
Silver68 Account Suspended Join Date: Oct 2015 Location: Cali Posts: 141	Re: Parting out: 68 chevy custom 1/2 ton I'll pass on ashtray, looking for less corrosion Thanks

05-14-2016, 07:07 PM	#25
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: Parting out: 68 chevy custom 1/2 ton Thanks, sorry! I didn't read the whole #1! __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

Register or Log In To remove these advertisements.