Starting to disassemble the interior of my CST

[Cwood0425]

I think it is time to start working on cleaning up and renewing the interior of my 68 CST as it will be in my future for many years

[HO455]

Welcome Aboard! Your truck looks to be nice and solid and unmolested. Good score! I like the original lettering. Can we see more?

On another note did you mean to post it here in the lonely Suburban section? If not then ask one of our wonderful, dedicated moderators to move it to the truck section.

[LockDoc]

-
Moved to truck forum.

Looks like you have a good solid truck there. Keep us posted on your progress.
.

[Cwood0425]

yes i did mean to post it in the Pickups

no disrespect to the suburban section

[68bowtie]

Nice truck. What’s the plan for the interior? Close to factory replacements? Don’t throw anything out, that’s all usable.

[toms68cst]

Welcome from a fellow '68 CST owner! Your truck looks very solid.

[Cwood0425]

Plans for the whole truck is a refresh not a restore or change. Interior needs some broken stuff replaced and new carpet and seat cover for buckets

[dagnabbitt]

That's a darn nice truck.

[Cwood0425]

HO455 i have a few photos in my 68 album

[Cwood0425]

I do agree it is a wonderful truck, i have had many and i kick myself every time i sell one.

[PbFut]

There are times when you just want to stop or at least slow any rust that is forming and save the task of panel replacement for another time. A good rust converter will do wonders at halting damage that can wait. While you have things apart, be sure to clear out all the weap holes in the doors and body panels. Also. The cowl vents that run down to kick panels fill with leaves and rodent stuff. They can get into the fan housing as well. Get all that cleared. It will keep things dryer. I used a smaller tube connected to a shop vac to get into tight spots. It was amazing how much was hidden in places I did know were there.

[Cwood0425]

Originally Posted by PbFut

There are times when you just want to stop or at least slow any rust that is forming and save the task of panel replacement for another time. A good rust converter will do wonders at halting damage that can wait. While you have things apart, be sure to clear out all the weap holes in the doors and body panels. Also. The cowl vents that run down to kick panels fill with leaves and rodent stuff. They can get into the fan housing as well. Get all that cleared. It will keep things dryer. I used a smaller tube connected to a shop vac to get into tight spots. It was amazing how much was hidden in places I did know were there.

Thank you that was great advice

[PbFut]

Watch for scope creep

[Cwood0425]

well the interior clean up has Creeped to under the hood also, I guess this is very common and happens to the best of us. I will have all of my interior stuff here in the next 2 weeks and can put it back together, I am starting to assemble under the hood the coming week.

[Cwood0425]

oh and i finally won my case with DMV in Texas and am registered with my Year plates

['68OrangeSunshine]

Originally Posted by Cwood0425

oh and i finally won my case with DMV in Texas and am registered with my Year plates

Nice looking plates.

[HO455]

Congratulations! Any day you win at the DMV is a good day.

[PbFut]

Scope creep. You'll end up with a paint boot of some sort in no time. You're doing good!

[Cwood0425]

i hope not in a paint booth,

but i am refreshing interior and under hood color

[TKCR]

Nice lookin truck
While you have your interior out, if you want your seatbelts cleaned/freshened up, I can do them. I have a link on my signature for the belts I restore. Although I mostly do the Squarebodies, I have done quite a few of the 67-72 belts also. The 2point belts on both the 67-72 and 73-75 are my favorites.

[pjmoreland]

How are things coming along on your project?

[Cwood0425]

My project is going fairly well. I found three spots of rust and as of today’s date all the rust has been repaired and repainted.

I have ordered a complete stock interior to replace all of the worn out and broken parts and I’ll be starting to install that soon.

I also removed the phone numbers and the lettering and the signs from the bed and the tailgate and polished out all the factory paint

[pjmoreland]

Originally Posted by Cwood0425

My project is going fairly well. I found three spots of rust and as of today’s date all the rust has been repaired and repainted.

I have ordered a complete stock interior to replace all of the worn out and broken parts and I’ll be starting to install that soon.

I also removed the phone numbers and the lettering and the signs from the bed and the tailgate and polished out all the factory paint

That sounds like some good progress. I'm looking forward to seeing how it turns out.

[Cwood0425]

Update;

as of today i am still working on the exterior and engine compartment

pjmoreland was kind enough to help with a Dash cluster and some Narrow stock rally's for the front. thank you

My exterior mods and clean up are done and i am finishing

I have added Headers and will add new exhaust. (Hooker comp headers for a Chevelle worked awesome)

[pjmoreland]

That's such a nice truck. It is coming along nicely. I hope you were able to straighten those rims to a satisfactory level.