Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-11-2009, 03:49 PM | #1 |
Registered User
Join Date: Mar 2009
Location: Highland, IN
Posts: 64
|
anyone running 3x2, 6 pack
Is anyone running the 3x2 setup on their sbc in these trucks?
|
09-11-2009, 04:31 PM | #2 |
Registered User
Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: anyone running 3x2, 6 pack
I'am building a long rod 400sbc for my truck now, heres the spec's.
.040 over block 400 crank 5.7 rods 11 to 1 compression dart aluminum heads, big valves hei dist. balanced-clearenced 3 rochester 2bbls on edelbrock aluminum manifod (all polished ) mild cam ( just enough to sound good and not kill bottom end torque 3.73 gears (275/60r15 rear tires ) 400 turbo with g/v o.d. unit & very mild stall converter vette ram horns and 2 1/2" exhaust, x pipe, flow masters p.s. i can post pic,s. of my 3x2bbl setup if you need to see it for something. i had CHARLIE PRICE IN FLORIDA RBUILD THEM FOR ME. I "DONT " RECOMEND HIM BECAUSE IT TOOK HIM ALMOST 2 YEARS AND BOY IS HE EXPENSIVE....
__________________
I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 09-11-2009 at 04:40 PM. |
09-11-2009, 04:38 PM | #3 |
Registered User
Join Date: Mar 2009
Location: Highland, IN
Posts: 64
|
Re: anyone running 3x2, 6 pack
thanks for the info.
I'm thinking about running the set-up on my 327 when I get around to building it, but I've been looking around at summit and jegs and their combos are like 1800 bucks. Do you know anywhere you can get parts for it at a decent price? |
09-11-2009, 04:49 PM | #4 |
Registered User
Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: anyone running 3x2, 6 pack
http://www.vintagespeed.com/
I HAVE CLOS TO $2200.00 IN MY SETUP AND I FURNISHED THE CARB CORES (348 SETUP 3X2BBL'S ) AND I HAD MY MANIFOLD POLISHED AS YOU CAN SEE
__________________
I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 09-11-2009 at 05:05 PM. |
09-11-2009, 05:12 PM | #5 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: anyone running 3x2, 6 pack
be real rreal carefull when dealing with charli price at vintage speed// over on the HAMB the rotio is like 20to 1 people who have been screwed by him// yep his stuff looks good but doesnt run worth S^^t
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
09-11-2009, 11:17 PM | #6 |
Registered User
Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: anyone running 3x2, 6 pack
i had alot of problems with him on getting mine done. i had to get a little firm with him. CDOWNS WHO DID YOUR SETUP ?
__________________
I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 09-11-2009 at 11:18 PM. |
09-12-2009, 12:07 AM | #7 | |
Registered User
Join Date: Jul 2009
Location: Whitemud Alberta
Posts: 328
|
Re: anyone running 3x2, 6 pack
Quote:
|
|
09-11-2009, 05:09 PM | #8 |
Registered User
Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: anyone running 3x2, 6 pack
ALSO you,d be better off going 383 or 400 sbc because 3x2bbl's is alot of cfm's. when they came out it was on hi-compression engine andin the times of great gas so to make up for it all you need to go big cubic inches as you can and as hi as compression as you can get by with. thats why i went with aluminum heads and 11-1 compression. i want all 3 carbs to work not just the center one as most people now days have it.
__________________
I BELIEVE IN JOHN 3:16 |
09-12-2009, 11:39 AM | #9 |
Registered User
Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: anyone running 3x2, 6 pack
I forget about hei clearence issues. I,ve got a new mallory dual point so its going in there.
__________________
I BELIEVE IN JOHN 3:16 |
Bookmarks |
|
|