what's it worth 67 GMC w/351 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shelby987 · 06-28-2006, 11:54 AM

Came across a 67 GMC the other day, and I was wondering what it might be worth.
Body in OK shape, some surface rust, and 'iffy' rockers and cab corners.
351 V6, Power steering, power brakes, small rear window, factory gauges including tach, 3/4t 2wd with what looked like a dana 60 rear, oh yeah, and a 4 speed w/creeper (sm 420/465 not sure).....was just wondering what this might be worth, its a pretty odd combination of options (who sprung for the PS and not the automatic?).

One draw back.....it had a sunroof......and while it has some more rare options, pretty sure that WASN'T one of them.

Americanrider · 06-28-2006, 01:06 PM

SM 420= Reverse is over to driver & down, last used in 67 unless a PO installed it in a newer truck. SM 465= Reverse is over to Pass side & down. I have read some postings by members that the 351 motors & heads a keepers for those who like the big V-6s. If you can check behind the seat back, you might find a build sheet there. GMC mostly (all most always) came with the Dana 60 rears. As much as I love the little window cabs it shounds like a parts truck, or maybe a project truck in need of a new cab. Value? $800 & up depending on you location & desire to own such a beast. Does it run & stop?

**Bob B.** · 06-28-2006, 01:52 PM

That truck should have a New Process 435 4 speed. Sounds a lot like my truck!

Americanrider · 06-29-2006, 03:43 AM

Quote:

Originally Posted by Bob B.

That truck should have a New Process 435 4 speed. Sounds a lot like my truck!

Oh yea, I forgot that one is out there, but I pulled this from the Novack site:

The 435 is an excellent, heavy-duty truck transmission designed and used in ½, 3/4 and 1+ ton trucks. It is a well-built transmission and remains easy to locate and generally inexpensive to buy and maintain. The strength, relatively short size and the gearing of the transmission make it a good choice for a variety of situations. The NP435 was made by New Process Gear from 1964 to 1993. They are found primarily in Ford trucks from 1966 to 1992 and Dodge trucks from 1964 to 1993. They also had limited distribution in GM & Chevrolet trucks from 1968-1972. The shifting pattern for the 435 is in the standard "H" pattern with reverse gear being to the right side, and down.

He did say this was a 67, so if it is stock and we assume that Novack is correct it should be a SM420. 3K is a bit steep. I ran accross a 67 GMC Custom Camper in a wrecking yard a while back. It had 305/Th400/PB/PS/3.54 Limited slip. I yanked the rear & PB setup for my 70 GMC shortie.

**72ironmike** · 06-29-2006, 06:46 AM

Here is info on one in Iowa that did not sell on ebay. Bid $2350.00. Sounds and look much better than what you describe. Call the numbers below and they will probably send you pics.

Vehicle Description

HERE YOU HAVE AN UNMOLESTED ALL ORIGINAL GMC 1967 PICKUP. THE TRUCK RUNS AND DRIVES LIKE BRAND NEW. AS FAR AS WE CAN TELL IT APPEARS TO BE THE ORIGINAL PAINT. AS YOU CAN SEE BY THE PICS WE ARE SURE THAT THIS TRUCK HAS NOT HAULED VERY MUCH IN THE BACK OF IT. I AM TOLD THAT THE V6 IS KIND OF RARE. BUT WE ARE UNCLEAR ABOUT THIS MAYBE SOME ONE OUT THERE CAN HELP US WITH THIS.WE THINK THAT WEONLY THE THE 3RD OWNERS OF THIS TRUCK.

THIS CAR IS FOR SALE LOCALLY SO WE RESERVE THE RIGHT TO END THE AUCTION EARLY. WE DO NOT WANT ANY MIS UNDERSTANDINGS ABOUT THE ITEMS THAT WE SELL (CHECK OUR FEED BACK)!!! THAT IS WHY WE INCLUDE OUR PHONE # IN THE LISTINGS SO THAT YOU MAY ASK US ANY QUESTIONS THAT YOU LIKE. 319-256-7201DAYS / 319-759-1040 NIGHTS, ASK FOR DAVE.

WE HAVE SHIPPING AVAILABLE EMAIL US AHEAD OF TIME FOR QUOTES

shelby987 · 06-28-2006, 03:45 PM

it was a camper cruiser.
Parts truck sounds too tough of a term, the rockers and cab corners didn't look that bad, the sunroof was installed "properly" but just looked really out of place.
I agree with the small window, I probably would have just swapped it down the road to remove the sunroof, avoid patching the rockers and cab corners (if necessary) and to get a big back window.
I just wanted to make sure that even with the PB, PS, and the 351 I wasn't walking away from some kind of an unheard of creature.....he wanted $3,000 for it......it was a little high for my taste, especially for having a motor and transmission combo most people tend to shy away from (I liked it, and I know some people on here like it....but he doesn't have to know that!)

JAKES 68GMC · 06-29-2006, 09:35 AM

Could you possibly get some pics of it? Sounds like a cool truck to me, except for the sunroof. Hint hint CAB SWAP!

**Bob B.** · 06-29-2006, 09:07 PM

Have to say the Novack site is a bit off on this one. G.M.C. favored the NP 435 with the V-6 on 4X2 models from 1965 up. 4X4 V-6's used the Muncie, however. I think the NP 435 might not have been offered in Chevrolet pickups before 1968, though. I just finished rebuilding the NP 435 in my '67.

*72fixerupper* · 06-30-2006, 06:13 PM

tsk, tsk, tsk. Now I got a little warning the one time I tried to ask for an opinion in this forum. you have to pay to get "what it's worth info".

glock35ipsc · 07-01-2006, 01:29 AM

Quote:

Originally Posted by 72fixerupper

tsk, tsk, tsk. Now I got a little warning the one time I tried to ask for an opinion in this forum. you have to pay to get "what it's worth info".

He DID pay, look under his user name. Site Supporter

teeitup · 07-01-2006, 11:04 AM

There is one on ebay right now, ends 7/1 at 3-4 oclock CST, no options but looks clean $999 #220001316379

*72fixerupper* · 06-30-2006, 06:21 PM

"Edited by Moderator***

Since you're new here, I'm trying to be gentle. What's it worth post are only allowed in the parts boards. To post there you need to be a subscriber. Subscribe here This is due to misuse by others. We welcome you to the board, and would like you to continue posting."

----BS, BS, BS. Mr Moderator should pull his head out and show some freaking consistancy with "policy".

***Josh*** · 07-01-2006, 11:15 AM

Quote:

Originally Posted by 72fixerupper

"Edited by Moderator***

Since you're new here, I'm trying to be gentle. What's it worth post are only allowed in the parts boards. To post there you need to be a subscriber. Subscribe here This is due to misuse by others. We welcome you to the board, and would like you to continue posting."

----BS, BS, BS. Mr Moderator should pull his head out and show some freaking consistancy with "policy".

Use a little courtesy and read the rules before speaking. Cya in seven days.

I probably wouldnt give over a grand for that truck, but hard to say without seeing it.

06-28-2006, 11:54 AM	#1
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	what's it worth 67 GMC w/351 Came across a 67 GMC the other day, and I was wondering what it might be worth. Body in OK shape, some surface rust, and 'iffy' rockers and cab corners. 351 V6, Power steering, power brakes, small rear window, factory gauges including tach, 3/4t 2wd with what looked like a dana 60 rear, oh yeah, and a 4 speed w/creeper (sm 420/465 not sure).....was just wondering what this might be worth, its a pretty odd combination of options (who sprung for the PS and not the automatic?). One draw back.....it had a sunroof......and while it has some more rare options, pretty sure that WASN'T one of them. __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

06-28-2006, 01:52 PM	#3
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,393	Re: what's it worth 67 GMC w/351 That truck should have a New Process 435 4 speed. Sounds a lot like my truck! __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

06-29-2006, 06:46 AM	#5
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,057	Re: what's it worth 67 GMC w/351 Here is info on one in Iowa that did not sell on ebay. Bid $2350.00. Sounds and look much better than what you describe. Call the numbers below and they will probably send you pics. Vehicle Description HERE YOU HAVE AN UNMOLESTED ALL ORIGINAL GMC 1967 PICKUP. THE TRUCK RUNS AND DRIVES LIKE BRAND NEW. AS FAR AS WE CAN TELL IT APPEARS TO BE THE ORIGINAL PAINT. AS YOU CAN SEE BY THE PICS WE ARE SURE THAT THIS TRUCK HAS NOT HAULED VERY MUCH IN THE BACK OF IT. I AM TOLD THAT THE V6 IS KIND OF RARE. BUT WE ARE UNCLEAR ABOUT THIS MAYBE SOME ONE OUT THERE CAN HELP US WITH THIS.WE THINK THAT WEONLY THE THE 3RD OWNERS OF THIS TRUCK. THIS CAR IS FOR SALE LOCALLY SO WE RESERVE THE RIGHT TO END THE AUCTION EARLY. WE DO NOT WANT ANY MIS UNDERSTANDINGS ABOUT THE ITEMS THAT WE SELL (CHECK OUR FEED BACK)!!! THAT IS WHY WE INCLUDE OUR PHONE # IN THE LISTINGS SO THAT YOU MAY ASK US ANY QUESTIONS THAT YOU LIKE. 319-256-7201DAYS / 319-759-1040 NIGHTS, ASK FOR DAVE. WE HAVE SHIPPING AVAILABLE EMAIL US AHEAD OF TIME FOR QUOTES

06-28-2006, 03:45 PM	#6
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: what's it worth 67 GMC w/351 it was a camper cruiser. Parts truck sounds too tough of a term, the rockers and cab corners didn't look that bad, the sunroof was installed "properly" but just looked really out of place. I agree with the small window, I probably would have just swapped it down the road to remove the sunroof, avoid patching the rockers and cab corners (if necessary) and to get a big back window. I just wanted to make sure that even with the PB, PS, and the 351 I wasn't walking away from some kind of an unheard of creature.....he wanted $3,000 for it......it was a little high for my taste, especially for having a motor and transmission combo most people tend to shy away from (I liked it, and I know some people on here like it....but he doesn't have to know that!) __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM! Last edited by shelby987; 06-28-2006 at 03:45 PM.

06-29-2006, 09:35 AM	#7
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: what's it worth 67 GMC w/351 Could you possibly get some pics of it? Sounds like a cool truck to me, except for the sunroof. Hint hint CAB SWAP!

06-28-2006, 01:06 PM	#2
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: what's it worth 67 GMC w/351 SM 420= Reverse is over to driver & down, last used in 67 unless a PO installed it in a newer truck. SM 465= Reverse is over to Pass side & down. I have read some postings by members that the 351 motors & heads a keepers for those who like the big V-6s. If you can check behind the seat back, you might find a build sheet there. GMC mostly (all most always) came with the Dana 60 rears. As much as I love the little window cabs it shounds like a parts truck, or maybe a project truck in need of a new cab. Value? $800 & up depending on you location & desire to own such a beast. Does it run & stop? Last edited by Americanrider; 06-28-2006 at 01:06 PM.

06-29-2006, 09:07 PM	#8
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,393	Re: what's it worth 67 GMC w/351 Have to say the Novack site is a bit off on this one. G.M.C. favored the NP 435 with the V-6 on 4X2 models from 1965 up. 4X4 V-6's used the Muncie, however. I think the NP 435 might not have been offered in Chevrolet pickups before 1968, though. I just finished rebuilding the NP 435 in my '67. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

06-30-2006, 06:13 PM	#9
72fixerupper Account Suspended Join Date: Jun 2006 Location: Kansas Posts: 8	Re: what's it worth 67 GMC w/351 tsk, tsk, tsk. Now I got a little warning the one time I tried to ask for an opinion in this forum. you have to pay to get "what it's worth info".

07-01-2006, 11:04 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: what's it worth 67 GMC w/351 There is one on ebay right now, ends 7/1 at 3-4 oclock CST, no options but looks clean $999 #220001316379 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-30-2006, 06:21 PM	#12
72fixerupper Account Suspended Join Date: Jun 2006 Location: Kansas Posts: 8	Re: what's it worth 67 GMC w/351 "Edited by Moderator*** Since you're new here, I'm trying to be gentle. What's it worth post are only allowed in the parts boards. To post there you need to be a subscriber. Subscribe here This is due to misuse by others. We welcome you to the board, and would like you to continue posting." ----BS, BS, BS. Mr Moderator should pull his head out and show some freaking consistancy with "policy".



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.