The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-12-2007, 01:37 PM   #1
AH619
Registered User
 
AH619's Avatar
 
Join Date: Aug 2006
Location: HARRISON AR.
Posts: 309
Power Steering Gearbox Rebuild?can I Do It?

MY 69 4X4 HAS A BAD WHEEL SHAKE AT 45 MPH.IVE HAD THE TIRES AND WHEELS REBALANCED AND HAVE ROTATED THE TIRES FROM EVERY CORNER AND IT MAKES NO DIFFERENCE.I HAVE HOWEVER FOUND THE BOTTOM SHAFT WOBBLING WHEN WHEN I HAVE SOMONE TURN THE STEERING WHEEL AND I LOOK FOR LOOSE TIE RODS ECT. MY QUESTION IS THIS. HOW HARD IS IT TO REPLACE THE THRUST BRGS? I HATE TO BY A RECONDITIONED BOX IF I CAN REPAIR MINE.MY SEALS ARE AS DRY AS A BONE?
__________________
72 2wd lwb cheyenne super youngest son.green/white
72 2wd lwb cheyenne super oldest son.green/white
71 4wd 3/4 cheyenne super frame off manderin
copper / white 4 inch lift. FINALLY DONE / SOLD
72 4WD SWB CHEYENNE BLUE/WHITE 388 AUTO


REMEMBER THE COPS NEVER THINK ITS AS FUNNY AS YOU DO. NORWOOD SURVIVOR
COPPERTONE BUILD THREAD/ http://www.67-72chevytrucks.com/vboa...d.php?t=259856
AH619 is offline   Reply With Quote
Old 03-12-2007, 02:19 PM   #2
69TowRig
Senior Member
 
Join Date: Jan 2005
Location: Raleigh, NC
Posts: 894
Re: Power Steering Gearbox Rebuild?can I Do It?

No idea on a box rebuild, I just swapped out my manual box for a tight power one and it made a difference in slop, but not wheel shake. My box had about 5" of play at the steering wheel. I would suspect wheel bearings, axle ball joints, and tie-rod/draglink ends. If your truck is still rolling around on the original balljoints then they might be worn out. The open-knuckle 44 on mine cost me ~ $90 to do all 4 ball joints.
__________________
-Chris
Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid.
Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...
69TowRig is offline   Reply With Quote
Old 03-13-2007, 10:13 AM   #3
AH619
Registered User
 
AH619's Avatar
 
Join Date: Aug 2006
Location: HARRISON AR.
Posts: 309
Re: Power Steering Gearbox Rebuild?can I Do It?

Shurly Someone Has Tried This And Either Had Success Or Failure?
__________________
72 2wd lwb cheyenne super youngest son.green/white
72 2wd lwb cheyenne super oldest son.green/white
71 4wd 3/4 cheyenne super frame off manderin
copper / white 4 inch lift. FINALLY DONE / SOLD
72 4WD SWB CHEYENNE BLUE/WHITE 388 AUTO


REMEMBER THE COPS NEVER THINK ITS AS FUNNY AS YOU DO. NORWOOD SURVIVOR
COPPERTONE BUILD THREAD/ http://www.67-72chevytrucks.com/vboa...d.php?t=259856
AH619 is offline   Reply With Quote
Old 03-13-2007, 10:55 AM   #4
cruiserman
Registered User
 
Join Date: Dec 2006
Location: Idaho
Posts: 210
Re: Power Steering Gearbox Rebuild?can I Do It?

I think most folks just swap out for a reconditioned box. I did on my 72 and no leaks so far.
__________________
72 C2500 LWB 402 Sierra Grande
05 Odyssey
08 Tundra
cruiserman is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com