water leaks in near kick panels...any ideas? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

canadianc-10 · 04-10-2007, 01:09 AM

ok i knew water leaked in my interior for awhile, but putting in new carpet and cant figure out where its coming from, short of pulling off fenders. i can see water drip from behind the brace that the pass side of the dash bolts to, checked grommets that i can see and they look good as do the top fender bolts, poured bucket of water on cowl area without getting any on windsheild and leaks pretty good still, so windsheild is ruled out...

BaddBusa2005 · 04-10-2007, 01:13 AM

my truck is doing the same thing, that has actually kept me from putting carpet in mine.

boatpuller · 04-10-2007, 01:14 AM

man,iv'e been there.thought i could rule out windshield.guess what? it was the windshield.i have heard of cowl getting crud built up around kick panel vent,i'd pull em and shine a light up thru vent holes,while somebody pours and see what you see.

BaddBusa2005 · 04-10-2007, 01:17 AM

did you pull and reseal the windsheild? if so, how hard was that?

boatpuller · 04-10-2007, 01:23 AM

after banging my head against the wall

i gave up and took it to a shop that's done glass work for me for year's,they charged me a 1/2 hour to reseal.it took care of it.weird part was i swore it wasn't windsheild.

canadianc-10 · 04-10-2007, 01:34 AM

my other c10 need a lil more then resealing windsheild, most of the lower flange was powder, hmm, ill pull the cowl off and see if can find anything

Srubydo1986 · 04-10-2007, 10:05 AM

Well i have a few ideas for you cause i went through it with my 86. My truck leaked in the corner of the windshield passanger side lower.

It also leaked under the valance between windshield and the hood. If you remove that and look were the metal meets the fire wall. The fatory would have sealed the seam with a silicon of some kind. Mine went bad at one spot so i had to reseal it. I used rtv but any thing should do.

Other then that check what boat puller said.

Slonaker · 04-10-2007, 12:06 PM

Swervin Ervin had a post on this somewhere on this board several years ago. I think that is the leak his had. It turned out to be a seam somehwere on the cowl. You might search his posts and find it, or PM him.

Slonaker

Pyrotechnic · 04-10-2007, 12:29 PM

The door weather stripping on my 78 was basically trash and it allowed water to leak in whenever it rained or I washed the truck. Just something else to consider.

**Captkaos** · 04-10-2007, 03:47 PM

The windshields in these trucks don't require sealant in the tracks. Most of the time when you have a leaks it is due to the drain being clogged with either dirt or glue. The other source is from the cowl area being filled with dirt and then actually rotting out and letting water in. Check your cowl area and clean it out. If it has already started, it will only get worse.

boatpuller · 04-10-2007, 04:58 PM

Quote:

Originally Posted by Captkaos

The windshields in these trucks don't require sealant in the tracks. Most of the time when you have a leaks it is due to the drain being clogged with either dirt or glue. The other source is from the cowl area being filled with dirt and then actually rotting out and letting water in. Check your cowl area and clean it out. If it has already started, it will only get worse.

i dunno,he pumped hot melt around the track and took care of it for me.i guess there may have been a spot not sealing down right.that filled with that stuff.that corner seam where cowl and inner cab,fender area meet above the vent is famous for rotting in the seam.one thing the glass guy's know in the n.w is how to keep out water.

piecesparts · 04-10-2007, 06:51 PM

These trucks have a nasty habit if having the sealer dry out. The stuff that is on the body seams UNDER the cowl. I had to go in and re-apply the sealer on my truck. It was not easy, since there is a lot of seams back under the body sheetmetal that has to be reached with a long arm or tool. This stopped my truck from leaking.

canadianc-10 · 04-10-2007, 09:50 PM

ok cool, im pretty sure its in the cowl area, think i have seam sealer still, but thats a project for whenever it quits raining and snowing

thump16 · 04-12-2007, 08:01 PM

mine was the actual seal between the floor and the side kick panel. There was rust behind the seal between the bottom and the top of the panel.

canadianc-10 · 04-12-2007, 11:02 PM

thanx boys, got pass side fixed, took off kick panel and brushed seam sealer on the 2 seams. drivers side must be windsheild leaking, insulation at the top of firewall is wet. ill pull the windsheild this weekend and buy a new one since its due for a new one anyways

04-10-2007, 01:09 AM	#1
canadianc-10 Registered User Join Date: Feb 2006 Location: brooks Posts: 130	water leaks in near kick panels...any ideas? ok i knew water leaked in my interior for awhile, but putting in new carpet and cant figure out where its coming from, short of pulling off fenders. i can see water drip from behind the brace that the pass side of the dash bolts to, checked grommets that i can see and they look good as do the top fender bolts, poured bucket of water on cowl area without getting any on windsheild and leaks pretty good still, so windsheild is ruled out...

04-10-2007, 01:13 AM	#2
BaddBusa2005 Registered User Join Date: Feb 2006 Location: Cleveland, TN Posts: 440	Re: water leaks in near kick panels...any ideas? my truck is doing the same thing, that has actually kept me from putting carpet in mine. __________________ 1981 Custom Deeluxe SWB 5.3/4L60e 3.73 and Auburn. Mustang Dyno 265hp/258tq

04-10-2007, 01:14 AM	#3
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: water leaks in near kick panels...any ideas? man,iv'e been there.thought i could rule out windshield.guess what? it was the windshield.i have heard of cowl getting crud built up around kick panel vent,i'd pull em and shine a light up thru vent holes,while somebody pours and see what you see. __________________ " Never look up a dead dogs butt."

04-10-2007, 01:17 AM	#4
BaddBusa2005 Registered User Join Date: Feb 2006 Location: Cleveland, TN Posts: 440	Re: water leaks in near kick panels...any ideas? did you pull and reseal the windsheild? if so, how hard was that? __________________ 1981 Custom Deeluxe SWB 5.3/4L60e 3.73 and Auburn. Mustang Dyno 265hp/258tq

04-10-2007, 01:23 AM	#5
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: water leaks in near kick panels...any ideas? after banging my head against the wall i gave up and took it to a shop that's done glass work for me for year's,they charged me a 1/2 hour to reseal.it took care of it.weird part was i swore it wasn't windsheild. __________________ " Never look up a dead dogs butt."

04-10-2007, 01:34 AM	#6
canadianc-10 Registered User Join Date: Feb 2006 Location: brooks Posts: 130	Re: water leaks in near kick panels...any ideas? my other c10 need a lil more then resealing windsheild, most of the lower flange was powder, hmm, ill pull the cowl off and see if can find anything

04-10-2007, 10:05 AM	#7
Srubydo1986 The Crazy Machanic Join Date: Jan 2007 Location: Nokesville Va Posts: 1,437	Re: water leaks in near kick panels...any ideas? Well i have a few ideas for you cause i went through it with my 86. My truck leaked in the corner of the windshield passanger side lower. It also leaked under the valance between windshield and the hood. If you remove that and look were the metal meets the fire wall. The fatory would have sealed the seam with a silicon of some kind. Mine went bad at one spot so i had to reseal it. I used rtv but any thing should do. Other then that check what boat puller said. __________________ 1986 Sliverado longbed 400 small block mean as hell, 700r4 trans (5 speed coming one day) 1970 chevelle 2dr sedan Latest update June 24 2007. *1957 4 door stationwagon - pink all original needing a good restore (body great, floors bad) newest additions 1965 shortbed fleet great granddads. Been told im nuts to bring it back from the dead (still going to happen) plans-all stock with a turbo 292 inline 3 speed column shift. and thats it big block 427 and 5 speed trans and ford 9 inch theyhave no home yet thinking what to put them in and a 79 c60 trash truck um no idea i have one

04-10-2007, 12:06 PM	#8
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Re: water leaks in near kick panels...any ideas? Swervin Ervin had a post on this somewhere on this board several years ago. I think that is the leak his had. It turned out to be a seam somehwere on the cowl. You might search his posts and find it, or PM him. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

04-10-2007, 12:29 PM	#9
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: water leaks in near kick panels...any ideas? The door weather stripping on my 78 was basically trash and it allowed water to leak in whenever it rained or I washed the truck. Just something else to consider. Last edited by Pyrotechnic; 04-10-2007 at 05:05 PM.

04-10-2007, 03:47 PM	#10
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: water leaks in near kick panels...any ideas? The windshields in these trucks don't require sealant in the tracks. Most of the time when you have a leaks it is due to the drain being clogged with either dirt or glue. The other source is from the cowl area being filled with dirt and then actually rotting out and letting water in. Check your cowl area and clean it out. If it has already started, it will only get worse. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

04-10-2007, 06:51 PM	#12
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: water leaks in near kick panels...any ideas? These trucks have a nasty habit if having the sealer dry out. The stuff that is on the body seams UNDER the cowl. I had to go in and re-apply the sealer on my truck. It was not easy, since there is a lot of seams back under the body sheetmetal that has to be reached with a long arm or tool. This stopped my truck from leaking.

04-10-2007, 09:50 PM	#13
canadianc-10 Registered User Join Date: Feb 2006 Location: brooks Posts: 130	Re: water leaks in near kick panels...any ideas? ok cool, im pretty sure its in the cowl area, think i have seam sealer still, but thats a project for whenever it quits raining and snowing

04-12-2007, 08:01 PM	#14
thump16 Registered User Join Date: Jul 2005 Location: Valdosta GA Posts: 708	Re: water leaks in near kick panels...any ideas? mine was the actual seal between the floor and the side kick panel. There was rust behind the seal between the bottom and the top of the panel. Last edited by thump16; 04-12-2007 at 08:02 PM.

04-12-2007, 11:02 PM	#15
canadianc-10 Registered User Join Date: Feb 2006 Location: brooks Posts: 130	Re: water leaks in near kick panels...any ideas? thanx boys, got pass side fixed, took off kick panel and brushed seam sealer on the 2 seams. drivers side must be windsheild leaking, insulation at the top of firewall is wet. ill pull the windsheild this weekend and buy a new one since its due for a new one anyways



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.