![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,685
|
Backspacing question - 4.5/6 drop, 17" Torqu Thrust II's
I was hoping someone had close to the same setup as I am thinking of going with. I'm looking for what backspacing will work for this setup:
Front - 17x8 Torque Thrust II's, 4.5" drop (spindles & 2" springs), stock A-arms Rear - 17x9.5 Torque Thrust II's, 6" drop (5" springs & 1" blocks) It seems the rears are only available off-the-shelf in 5" BS (custom available for $$$), but the fronts I have seen 4", 4.5" (Eagle 211's), and 5". If you are running the TT II's or American Eagle 211's on the front, and they are 8" wide, with a ~4" drop, what backspacing are you using? Thanks!
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
![]() |
![]() |
![]() |
Bookmarks |
|
|