5 Lug Disc Brake F/S-Ks. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 11-12-2007, 08:08 AM

Complete 5 lug disc brake crossmember from '71 2wd pickup. Hub to hub with coils, upper and lower a-arms, calipers, spindles, dust sheilds. $125 or offers? Must be picked up, 30 miles south of Wichita, Ks. Will break down to just the spindles, dust sheilds, calipers and ship on your cost. Need this gone but hate to scrap it.

ksucatz · 11-14-2007, 01:23 PM

What kind of shape are the brake parts in? Are the rotors and caliper original?

Thanks

**Ironhorse** · 11-14-2007, 05:20 PM

The truck was running when it was trashed in a roll over, not a straight piece of sheet metal on it when I aquired it. Brakes were still operating at the time. As far as I know the caliper brackets are stock original, not sure about the rotors. They may clean up with a turning but I can't say for sure. Been setting for awhile outside. At the least if I were using this for a disc brake conversion I would replace the rotors and pads.

andrewt2 · 11-14-2007, 08:16 PM

how much for front spindles rotors and calipers shipped to 66414?

**Ironhorse** · 11-14-2007, 09:28 PM

Not sure what shipping to 66414 zip would amount to. Will have to do some figuring on that, not sure what the weights involved would be. Would really like to sell as complete crossmember for disc conversion but will try and get you some sort of a realistic shipping quote for following parts:

spindles, dust shields, caliper brackets and bolts, and rotors if you want them. Anything else you may want for a conversion? Do you want the upper and lower A-arms?

Might want to replace the rotors as I am not sure how well they will turn within tolerance.

Give me some time to try and calculate the shipping weights and costs and I will get back to you.

andrewt2 · 11-15-2007, 07:41 AM

i shouldnt need the a arms i should be able to use mine. just the spindles rotors calipers/bolts, and dust shields u might see how much weight is saved without the rotors. if gas wasnt well over 3 bucks a gallon id just make a drive to come on down but gas prices are killer!

70chevytruck · 11-23-2007, 11:45 AM

Do you still have this for sale? If so, I would be interested in the upper and lower control arms and spindles. I figure to buy new rotors and calipers etc.
Thanks.

**Ironhorse** · 11-23-2007, 05:36 PM

Still have the complete crossmember all in one piece at the moment. Will get a shipping quote for you soon as possible for the upper and lower a-arms, disc brake spindles, backing plates (dust shields) and the calipers (with the bolts) if you want them for the cores. Might be cheaper to you using these calipers for cores if you have to pay core charges.

**Ironhorse** · 11-25-2007, 09:41 AM

70chevytruck, PM sent with info.

**Ironhorse** · 12-10-2007, 06:24 AM

Cross member still available, complete 5 lug disc brakes, $125. Would be best for local pick up as shipping prices make it tough.

ksucatz · 12-19-2007, 09:48 AM

Well, I was down last week, but with the weather, I figured I better wait. Don't know when I will get that way again. After the first probably. If you are not in a hurry, I will look then.

Thanks
Brent

ksucatz · 01-21-2008, 11:27 PM

I will put the disc brakes to good use. Thanks for working with me.

11-12-2007, 08:08 AM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	5 Lug Disc Brake F/S-Ks. Complete 5 lug disc brake crossmember from '71 2wd pickup. Hub to hub with coils, upper and lower a-arms, calipers, spindles, dust sheilds. $125 or offers? Must be picked up, 30 miles south of Wichita, Ks. Will break down to just the spindles, dust sheilds, calipers and ship on your cost. Need this gone but hate to scrap it. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 11-02-2008 at 10:00 PM.

11-14-2007, 01:23 PM	#2
ksucatz Suppose to be workin........ Join Date: Jul 2001 Location: Shawnee, KS USA Posts: 164	Re: 5 Lug Disc Brake F/S-Ks. What kind of shape are the brake parts in? Are the rotors and caliper original? Thanks __________________ Brent '68 C10 '70 C10 '72 LeMans "03 Trailblazer "Stupidity is like a skill, some are born with it and some develop it over a period of time."" Author unknown

11-14-2007, 05:20 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: 5 Lug Disc Brake F/S-Ks. The truck was running when it was trashed in a roll over, not a straight piece of sheet metal on it when I aquired it. Brakes were still operating at the time. As far as I know the caliper brackets are stock original, not sure about the rotors. They may clean up with a turning but I can't say for sure. Been setting for awhile outside. At the least if I were using this for a disc brake conversion I would replace the rotors and pads. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-14-2007, 08:16 PM	#4
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: 5 Lug Disc Brake F/S-Ks. how much for front spindles rotors and calipers shipped to 66414?

11-14-2007, 09:28 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: 5 Lug Disc Brake F/S-Ks. Not sure what shipping to 66414 zip would amount to. Will have to do some figuring on that, not sure what the weights involved would be. Would really like to sell as complete crossmember for disc conversion but will try and get you some sort of a realistic shipping quote for following parts: spindles, dust shields, caliper brackets and bolts, and rotors if you want them. Anything else you may want for a conversion? Do you want the upper and lower A-arms? Might want to replace the rotors as I am not sure how well they will turn within tolerance. Give me some time to try and calculate the shipping weights and costs and I will get back to you. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-15-2007, 07:41 AM	#6
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: 5 Lug Disc Brake F/S-Ks. i shouldnt need the a arms i should be able to use mine. just the spindles rotors calipers/bolts, and dust shields u might see how much weight is saved without the rotors. if gas wasnt well over 3 bucks a gallon id just make a drive to come on down but gas prices are killer!

11-23-2007, 11:45 AM	#7
70chevytruck Registered User Join Date: Jun 2007 Location: Buda, Texas Posts: 865	Re: 5 Lug Disc Brake F/S-Ks. Do you still have this for sale? If so, I would be interested in the upper and lower control arms and spindles. I figure to buy new rotors and calipers etc. Thanks.

11-23-2007, 05:36 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: 5 Lug Disc Brake F/S-Ks. Still have the complete crossmember all in one piece at the moment. Will get a shipping quote for you soon as possible for the upper and lower a-arms, disc brake spindles, backing plates (dust shields) and the calipers (with the bolts) if you want them for the cores. Might be cheaper to you using these calipers for cores if you have to pay core charges. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-25-2007, 09:41 AM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: 5 Lug Disc Brake F/S-Ks. 70chevytruck, PM sent with info. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

12-10-2007, 06:24 AM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: 5 Lug Disc Brake F/S-Ks. Cross member still available, complete 5 lug disc brakes, $125. Would be best for local pick up as shipping prices make it tough. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

12-19-2007, 09:48 AM	#11
ksucatz Suppose to be workin........ Join Date: Jul 2001 Location: Shawnee, KS USA Posts: 164	Re: 5 Lug Disc Brake F/S-Ks. Well, I was down last week, but with the weather, I figured I better wait. Don't know when I will get that way again. After the first probably. If you are not in a hurry, I will look then. Thanks Brent __________________ Brent '68 C10 '70 C10 '72 LeMans "03 Trailblazer "Stupidity is like a skill, some are born with it and some develop it over a period of time."" Author unknown

01-21-2008, 11:27 PM	#12
ksucatz Suppose to be workin........ Join Date: Jul 2001 Location: Shawnee, KS USA Posts: 164	Re: 5 Lug Disc Brake F/S-Ks. I will put the disc brakes to good use. Thanks for working with me. __________________ Brent '68 C10 '70 C10 '72 LeMans "03 Trailblazer "Stupidity is like a skill, some are born with it and some develop it over a period of time."" Author unknown



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.