how to plug oil pressure line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tim21391 · 01-16-2009, 12:36 AM

i took my gauges out to install a white face gauge kit.. and the truck is getting a color change so they are out and i pulled truck out and i come back and i gotta puddle of oil by the driver pedal...how do i plug this so i dont leak when i want the engine to run because while the truck sits while we fix the rust and get it painted i dont want the carb to gum up

cdowns · 01-16-2009, 12:42 AM

take the fitting out of the block and put a plug in it

**El Jay** · 01-16-2009, 12:45 AM

Quote:

Originally Posted by cdowns

take the fitting out of the block and put a plug in it

Awwwwwww, Man,
You posted while I was typing, that ain't fair.

**El Jay** · 01-16-2009, 12:43 AM

You could probably pull the fitting @ the back of the block & put in a pipe plug.
Should be 1/8", I believe.

That way nothing gets bent up, or crimped in the cab.

Brock396 · 01-16-2009, 12:46 AM

remove the other end of the line from the block and install a npt pug
Brock396

Brock396 · 01-16-2009, 12:49 AM

thats ok. two people posted while i was typeing

tim21391 · 01-16-2009, 12:51 AM

oh ok well it ran for 5 minutes so it should be good for another week or two.. now would be a good time for me to sand where it was

71tahoe · 01-16-2009, 08:57 AM

I've never had a plug when I needed it but I did have an extra gauge. Very handy when you prime the engine before you start if for the first time after rebuild too.

lts70 · 01-16-2009, 12:28 PM

That what I do as well. I have an extra oil gauge that I just screw on in the cab after I take out my cluster.

01-16-2009, 12:36 AM	#1
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	how to plug oil pressure line i took my gauges out to install a white face gauge kit.. and the truck is getting a color change so they are out and i pulled truck out and i come back and i gotta puddle of oil by the driver pedal...how do i plug this so i dont leak when i want the engine to run because while the truck sits while we fix the rust and get it painted i dont want the carb to gum up __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

01-16-2009, 12:42 AM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: how to plug oil pressure line take the fitting out of the block and put a plug in it __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-16-2009, 12:43 AM	#4
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: how to plug oil pressure line You could probably pull the fitting @ the back of the block & put in a pipe plug. Should be 1/8", I believe. That way nothing gets bent up, or crimped in the cab. __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck Last edited by El Jay; 01-16-2009 at 12:44 AM.

01-16-2009, 12:46 AM	#5
Brock396 Registered User Join Date: Jan 2009 Location: Murphysboro,il Posts: 38	Re: how to plug oil pressure line remove the other end of the line from the block and install a npt pug Brock396

01-16-2009, 12:49 AM	#6
Brock396 Registered User Join Date: Jan 2009 Location: Murphysboro,il Posts: 38	Re: how to plug oil pressure line thats ok. two people posted while i was typeing

01-16-2009, 12:51 AM	#7
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: how to plug oil pressure line oh ok well it ran for 5 minutes so it should be good for another week or two.. now would be a good time for me to sand where it was __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

01-16-2009, 08:57 AM	#8
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Re: how to plug oil pressure line I've never had a plug when I needed it but I did have an extra gauge. Very handy when you prime the engine before you start if for the first time after rebuild too.

01-16-2009, 12:28 PM	#9
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,037	Re: how to plug oil pressure line That what I do as well. I have an extra oil gauge that I just screw on in the cab after I take out my cluster. __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.