WTB - TH400 Yoke

[Green Machine]

Looking for a Turbo 400 yoke for the larger seal, yoke should measuere about 1 7/8 in. in diameter. Let me know - Thanks.

[Livrat]

Are you wanting one with outside clip u-joint or inside clip (C-clip)? (our trucks originally used outside clips) I have both.
$40.00 ea shipped

[Green Machine]

I would prefer the usual outside clip style. How long is it from the ujoint center to the end ? Ujoint cup should be 1 1/16, 1310 style joint. Do you have a pic ? Thanks.

[Livrat]

yes they are 1310 series with 1 1/16 caps.. I will measure length and snap you a picture tomorrow while at the shop.

[Green Machine]

Thanks, just want to verify that it is for the large seal, should be a hair over 1 7/8 or 1.885. I've already bought one for the smaller seal, just want to be sure this time. Anybody need a yoke for a Th400 - 1 11/16 size ?

[Livrat]

Here are pics of the two that I have for a large seal.. both have the same size u-joint cap.. There is also a picture of the small seal one for reference.. they all have the same size cap.. the two large seal ones are wider than the small seal one..

[Livrat]

more pics

[Green Machine]

Thanks, great pics and measurements. The diameter on the fat ones is right, but it looks like they use the 1320 joint ? Maybe I'm looking for hens teeth, but isn't there a large seal yoke for the smaller joint ?