Can anyone Tell me...??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bill_ont_canada · 01-01-2003, 02:07 AM

The STOCK measurements from the ground to the fender lips measured through the center of the wheel to the lip above the tire on a 76 STEPSIDE ...

I assume '73 to '80 will be the same

STOCK- meaning as they came from the Factory with Stock Tires whatever size they may have been.

All replies are appreciated.

HAPPY NEW YEAR TO ALL

pkbinplano · 01-01-2003, 09:55 AM

With 255's mine is 31 front, 31 5/8 rear from ground to top of fender well lip. Mine is stock height lwb Hope that helps

bill_ont_canada · 01-03-2003, 03:51 AM

Thanx pkbinplano for the reply, I really need the measurement of the back fenders on a Stepside.

J-Spec C10 · 01-03-2003, 10:19 PM

Bill, I don't really think it'll be that much different, if you look at a pic of a stock C10 and a stock C10 stepside, the space looks almost identicle.

01-01-2003, 02:07 AM	#1
bill_ont_canada Nobody is perfect... Join Date: Dec 2002 Location: London,Ont,Canada Posts: 200	Help STEPSIDERS, Can anyone Tell me...??? The STOCK measurements from the ground to the fender lips measured through the center of the wheel to the lip above the tire on a 76 STEPSIDE ... I assume '73 to '80 will be the same STOCK- meaning as they came from the Factory with Stock Tires whatever size they may have been. All replies are appreciated. HAPPY NEW YEAR TO ALL __________________ Have a fabulous day. Bill... (ö¿ö) " Loud Pipes Save Lives " Last edited by bill_ont_canada; 01-03-2003 at 03:53 AM.

01-01-2003, 09:55 AM	#2
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	With 255's mine is 31 front, 31 5/8 rear from ground to top of fender well lip. Mine is stock height lwb Hope that helps __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

01-03-2003, 03:51 AM	#3
bill_ont_canada Nobody is perfect... Join Date: Dec 2002 Location: London,Ont,Canada Posts: 200	Thanx pkbinplano for the reply, I really need the measurement of the back fenders on a Stepside. __________________ Have a fabulous day. Bill... (ö¿ö) " Loud Pipes Save Lives "

01-03-2003, 10:19 PM	#4
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	Bill, I don't really think it'll be that much different, if you look at a pic of a stock C10 and a stock C10 stepside, the space looks almost identicle. __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.