The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-31-2009, 02:46 AM   #1
1972GMCSUB
Registered User
 
Join Date: May 2009
Location: So Cal, USA
Posts: 58
Where can I locate ft & rr coil springs with 2" or 4" lift over stock?

Hi there, I'm new to the forum and I just recently bought a 1972 GMC Suburban 2 wheel drive and I'd like to lift it up just a little bit over the stock height. I would like to know if I can go to either 2" or 4" above the stock height without having to change anything like the brake lines or anything at all.

And my second question is, assuming I can go to either 2" or 4" above the stock height without having to change anything, where can I get the coil springs? I found the stock springs at my local auto parts store so I know that I can go the stock route if need be, but I'd first like to see if I can get springs that will lift my Suburban up 4" preferrably above stock.

Thanks for your help,

Chris
dukecac@aol.com
1972GMCSUB is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com