SD Wtd: LS Ignition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gene_ensor · 10-07-2009, 09:38 PM

I am looking for an LS2, LS3, or LS7 coil ignition setup, with bracket, misc hardware, wire harness, and plug wires. The truck coils have a visible external aluminum heat sink near the connector. Thanks.

This GM heat sink coil was used on:
Cadillac Escalade 2002-2009
Yukon 2000-2009
Chevy Silverado 1999-2009
Trail Blazer 2001-2009
Hummers ? - ?

Gene
605 & 721 & 5545 ( please remove the &'s, helps reduce the automated marketing phone calls)
or email

clinebarger · 10-08-2009, 11:45 PM

Not all truck coils were Delco. they also have a mitsubishi coil too. LS1 are different than LS7 etc. my 04 5.3 has mitsu coils on it

gene_ensor · 10-09-2009, 09:57 PM

Good point. I think the other types are Wells C1251, Standard UF262, and GM/Daewoo 190005218. I'd just be happy to get whole setup without breaking the bank..... Delco or other.....

clinebarger · 10-09-2009, 11:17 PM

I have a delco set good condition with plug wires,bracket,harness $200.
and a set of Mitsu coils no plug wires that are banged up for $100 (2 coils are broke) i have a coil that has cosmetic damage i will throw in so you will only got to buy one.

gene_ensor · 10-10-2009, 08:36 AM

Quote:

Originally Posted by clinebarger

I have a delco set good condition with plug wires,bracket,harness $200.
and a set of Mitsu coils no plug wires that are banged up for $100 (2 coils are broke) i have a coil that has cosmetic damage i will throw in so you will only got to buy one.

Can you tell me what year and vehicle they came from? Also, how difficult would it be to get a picture or two? Thanks!

clinebarger · 10-11-2009, 04:55 PM

The delcos are 2002 chevy truck. the mitsus are 2004 chevy truck both 5.3L
ill take some pics tomorrow (there at the shop)

gene_ensor · 10-13-2009, 11:15 PM

I'd buy the 2002 set... if you had part of the engine harness that connects to the coil harness. Please tell me you do. Thanks!

clinebarger · 10-14-2009, 02:11 PM

I have two complete harnesses. but im not going to cut them up. if you want to buy one let me know.

10-07-2009, 09:38 PM	#1
gene_ensor Registered User Join Date: Oct 2005 Location: Rapid City South Dakota Posts: 39	Wtd: LS Ignition I am looking for an LS2, LS3, or LS7 coil ignition setup, with bracket, misc hardware, wire harness, and plug wires. The truck coils have a visible external aluminum heat sink near the connector. Thanks. This GM heat sink coil was used on: Cadillac Escalade 2002-2009 Yukon 2000-2009 Chevy Silverado 1999-2009 Trail Blazer 2001-2009 Hummers ? - ? Gene 605 & 721 & 5545 ( please remove the &'s, helps reduce the automated marketing phone calls) or email Attached Images

10-08-2009, 11:45 PM	#2
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Wtd: LS Ignition Not all truck coils were Delco. they also have a mitsubishi coil too. LS1 are different than LS7 etc. my 04 5.3 has mitsu coils on it Attached Images

10-09-2009, 09:57 PM	#3
gene_ensor Registered User Join Date: Oct 2005 Location: Rapid City South Dakota Posts: 39	Re: Wtd: LS Ignition Good point. I think the other types are Wells C1251, Standard UF262, and GM/Daewoo 190005218. I'd just be happy to get whole setup without breaking the bank..... Delco or other.....

10-09-2009, 11:17 PM	#4
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Wtd: LS Ignition I have a delco set good condition with plug wires,bracket,harness $200. and a set of Mitsu coils no plug wires that are banged up for $100 (2 coils are broke) i have a coil that has cosmetic damage i will throw in so you will only got to buy one.

10-11-2009, 04:55 PM	#6
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Wtd: LS Ignition The delcos are 2002 chevy truck. the mitsus are 2004 chevy truck both 5.3L ill take some pics tomorrow (there at the shop)

10-13-2009, 11:15 PM	#7
gene_ensor Registered User Join Date: Oct 2005 Location: Rapid City South Dakota Posts: 39	Re: Wtd: LS Ignition I'd buy the 2002 set... if you had part of the engine harness that connects to the coil harness. Please tell me you do. Thanks!

10-14-2009, 02:11 PM	#8
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Wtd: LS Ignition I have two complete harnesses. but im not going to cut them up. if you want to buy one let me know.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.