drilling large wholes in frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bikes&bowties · 01-03-2011, 11:54 PM

I need to drill 1.5 inch holes in the frame for the front spring shankle hanger. And i need to know the best way of going about doing this. Ideas? These are huge holes and im out of ideas. Thanks for the insight because this is all I need to get my axle hung for my 4x4 swap

79bonanza · 01-03-2011, 11:58 PM

get a whole saw like the drill bit kind and some oil and have at it

bikes&bowties · 01-04-2011, 12:09 AM

where do I find hole saws for steel? all i know of is the ones for wood...

Man this is going to be a real big pain in the ass !

79bonanza · 01-04-2011, 12:12 AM

i just used a wood one and let her fly on my drill, i mean dont buy a real exspensive one because it prolly wont be any good once your done but it worked for me

bikes&bowties · 01-04-2011, 12:14 AM

so you used it for the same thing? thats good to know that it worked

79bonanza · 01-04-2011, 12:15 AM

yup i did a 52'' front spring swap but its all the same, i mean i drilled the same size whole and i worked out alright

3r!c84 · 01-04-2011, 12:16 AM

do you have a harbor freight around where you live? they have steal hole saw bits. CHEAP

Benelli · 01-04-2011, 01:14 AM

Quote:

Originally Posted by 3r!c84

do you have a harbor freight around where you live? they have steal hole saw bits. CHEAP

This!

If it's a long ways away bring a credit card and get some other stuff you've been meaning to buy

bikes&bowties · 01-04-2011, 03:14 AM

We have a farm account at a place in town that should have what I need. Thanks for the tips
Posted via Mobile Device

S10Fan · 01-04-2011, 06:35 AM

Lowes and Home Depot both sell steel cutting hole saws. Be sure to use a "corded" drill and grab some cutting oil while you're there. Take your time drilling.

madcow75 · 01-04-2011, 07:42 AM

Buy a bi-metal hole saw use some oil and you will be fine. They are made for all types of metal. Drill at a slow speed thou.

b454rat · 01-04-2011, 08:19 AM

I think it's a 2" hole not 1 1/2", might want to check first!!! I got mine from a local hardware store....

Mattman2010 · 01-04-2011, 11:01 AM

Quote:

Originally Posted by b454rat

I think it's a 2" hole not 1 1/2", might want to check first!!! I got mine from a local hardware store....

x2 on this, if anything it is 1 3/4" I used the 2" and it worked great! I have about 1/4 inch of play on mine when I did them. I got mine at Home Depot.

willett · 01-04-2011, 09:59 AM

oxy aceteline, die grinder, and protractor?

bikes&bowties · 01-04-2011, 10:14 PM

it will take a 1.75 inch hole to clear the spring mount.

01-03-2011, 11:54 PM	#1
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	drilling large wholes in frame I need to drill 1.5 inch holes in the frame for the front spring shankle hanger. And i need to know the best way of going about doing this. Ideas? These are huge holes and im out of ideas. Thanks for the insight because this is all I need to get my axle hung for my 4x4 swap

01-03-2011, 11:58 PM	#2
79bonanza Registered User Join Date: Oct 2010 Location: sadieville, kentucky Posts: 167	Re: drilling large wholes in frame get a whole saw like the drill bit kind and some oil and have at it

01-04-2011, 12:09 AM	#3
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: drilling large wholes in frame where do I find hole saws for steel? all i know of is the ones for wood... Man this is going to be a real big pain in the ass !

01-04-2011, 12:12 AM	#4
79bonanza Registered User Join Date: Oct 2010 Location: sadieville, kentucky Posts: 167	Re: drilling large wholes in frame i just used a wood one and let her fly on my drill, i mean dont buy a real exspensive one because it prolly wont be any good once your done but it worked for me

01-04-2011, 12:14 AM	#5
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: drilling large wholes in frame so you used it for the same thing? thats good to know that it worked

01-04-2011, 12:15 AM	#6
79bonanza Registered User Join Date: Oct 2010 Location: sadieville, kentucky Posts: 167	Re: drilling large wholes in frame yup i did a 52'' front spring swap but its all the same, i mean i drilled the same size whole and i worked out alright

01-04-2011, 12:16 AM	#7
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: drilling large wholes in frame do you have a harbor freight around where you live? they have steal hole saw bits. CHEAP __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

01-04-2011, 03:14 AM	#9
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: drilling large wholes in frame We have a farm account at a place in town that should have what I need. Thanks for the tips Posted via Mobile Device

01-04-2011, 06:35 AM	#10
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: drilling large wholes in frame Lowes and Home Depot both sell steel cutting hole saws. Be sure to use a "corded" drill and grab some cutting oil while you're there. Take your time drilling. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

01-04-2011, 07:42 AM	#11
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: drilling large wholes in frame Buy a bi-metal hole saw use some oil and you will be fine. They are made for all types of metal. Drill at a slow speed thou.

01-04-2011, 08:19 AM	#12
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: drilling large wholes in frame I think it's a 2" hole not 1 1/2", might want to check first!!! I got mine from a local hardware store.... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

01-04-2011, 09:59 AM	#14
willett Another Day, Another Dollar Join Date: Nov 2008 Location: North Vancouver, BC Posts: 1,316	Re: drilling large wholes in frame oxy aceteline, die grinder, and protractor? __________________ -78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square"

01-04-2011, 10:14 PM	#15
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: drilling large wholes in frame it will take a 1.75 inch hole to clear the spring mount.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.