PA 68 c20 4x4 parts truck $ 700 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dishow · 01-08-2011, 04:39 PM

Needs to go by monday night.believe its a 350 motor.for speed trans, t case and all running gear is there.good grill and left fender.other misc parts.I'll upload photos asap.if your close to northeast pa its worth it.thanks for looking.570-721-0305.
Posted via Mobile Device

**special-K** · 01-08-2011, 06:14 PM

How much $?

**jimer1964** · 01-08-2011, 06:16 PM

tim i see 700.00 interested would like to see pics

dishow · 01-08-2011, 06:17 PM

heres the pics.

70BLAZERX2 · 01-08-2011, 06:34 PM

1 of 4,704 built...pretty rare truck.

**jimer1964** · 01-08-2011, 06:35 PM

thanks for the pics i am going to pass looks like a project for msgross!

67gmcstepside · 01-08-2011, 06:36 PM

If I had room I would buy it for the leafs and part out the rest. 700 sounds very reasonable. Good luck.

70BLAZERX2 · 01-08-2011, 06:38 PM

that is a rockwell transfer case it has also. Closed front knuckle dana44HD up front..

dishow · 01-08-2011, 06:49 PM

what year did the put the 350 in? could this be a 327?the glove box sticker is gone so i dont know.would like to see someone get this for the parts it has.hate to see it go to crusher.

70BLAZERX2 · 01-08-2011, 06:53 PM

std v8 in 68 was the 307...327 was an option...and would be on the glovbox.

I would say 307 truck...get the code off the front of block ,just in front of the pass. cyl head..you will need a knife to scrape it clean..I can tell you what motor it is..should have a few #s then 2 or 3 letters ..

http://www.nastyz28.com/chevy-engine-code-stampings.php

dishow · 01-08-2011, 07:07 PM

thanks

dishow · 01-09-2011, 01:35 AM

this needs to get saved from the crusher. soooooo sad.

seadonkey · 01-09-2011, 07:59 AM

If you're willing to sell some small parts, I might be interested in a few if it comes down to hauling it in. Let me know.
Thanks

dishow · 01-09-2011, 02:08 PM

ttt
sorry,no time to part out.was hoping someone close could use this and snatch it up.

Jobe72 · 01-09-2011, 06:13 PM

Is this your truck? I mean no disrespect but if you are going to take it to the crusher on Monday, why charge twice what you will get at the salvage yard? If you want it saved...sell it for scrap value. I know it's a free market, I would probably try and do the same...but I'd rather see it stripped for parts vs. smashed.

dishow · 01-09-2011, 09:31 PM

I understand your response.no its not my truck.it showed up at my house yesterday with the local scrap guy.wanted to know if I needed any parts for our 67.since I didn't need anything I asked if I could put it on the site for someone.few extra bucks for me for my time dealing with it and a few for him.he's getting 400 +so tearing in to it to part it out ain't worth it, unless someone wanted to snatch it up.the price is reasonable for the parts, but I guess this one will be left for scrap.
Posted via Mobile Device

**jimer1964** · 01-09-2011, 09:53 PM

so sad

if it was closer and a 71-72 it would have been worth the trip

devildawg12 · 01-11-2011, 04:13 PM

Why is everything so far away from me, someone needs to buy this one

jaros44sr · 01-11-2011, 04:45 PM

What scrape yard it going to...might give some more time to yank some parts

**ScottH** · 01-11-2011, 04:49 PM

I'm lookin for a straight hood if it goes for parts.

Thanks
Scott

JibSheet · 01-11-2011, 05:43 PM

Nice price for the parts, hate to scrap it. Would you be willing to take the front "C H E V R O L E T" lettering off the hood and ship? Wish I was closer I'd snatch it up!

dishow · 01-11-2011, 09:36 PM

thanks for all the replies.they took it to scrapyard this afternoon.thought about buying it myself and parting,but didnt know if i would ever make my money back on the parts since i didnt need to use any of them myself.oh well.....good bye old bowtie.

Patsfan34 · 01-11-2011, 09:45 PM

Damn I would've taken the Transfer Case boot and ring...oh well

6768chevylover · 01-12-2011, 11:37 PM

what scrap yard did it go to? I live i milford pa. i was looking for a 4x4 rolling chassis. i just found this post and that sucks that its gone...

CORSAIR · 01-12-2011, 11:39 PM

"rip"

01-08-2011, 04:39 PM	#1
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	68 c20 4x4 parts truck $ 700 Needs to go by monday night.believe its a 350 motor.for speed trans, t case and all running gear is there.good grill and left fender.other misc parts.I'll upload photos asap.if your close to northeast pa its worth it.thanks for looking.570-721-0305. Posted via Mobile Device __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-08-2011, 06:14 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 68 c20 4x4 parts truck $ 700 How much $? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-08-2011, 06:16 PM	#3
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: 68 c20 4x4 parts truck $ 700 tim i see 700.00 interested would like to see pics

01-08-2011, 06:17 PM	#4
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 68 c20 4x4 parts truck $ 700 heres the pics. Attached Images __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-08-2011, 06:34 PM	#5
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: 68 c20 4x4 parts truck $ 700 1 of 4,704 built...pretty rare truck.

01-08-2011, 06:35 PM	#6
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: 68 c20 4x4 parts truck $ 700 thanks for the pics i am going to pass looks like a project for msgross!

01-08-2011, 06:36 PM	#7
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: 68 c20 4x4 parts truck $ 700 If I had room I would buy it for the leafs and part out the rest. 700 sounds very reasonable. Good luck.

01-08-2011, 06:38 PM	#8
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: 68 c20 4x4 parts truck $ 700 that is a rockwell transfer case it has also. Closed front knuckle dana44HD up front..

01-08-2011, 06:49 PM	#9
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 68 c20 4x4 parts truck $ 700 what year did the put the 350 in? could this be a 327?the glove box sticker is gone so i dont know.would like to see someone get this for the parts it has.hate to see it go to crusher. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-08-2011, 06:53 PM	#10
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: 68 c20 4x4 parts truck $ 700 std v8 in 68 was the 307...327 was an option...and would be on the glovbox. I would say 307 truck...get the code off the front of block ,just in front of the pass. cyl head..you will need a knife to scrape it clean..I can tell you what motor it is..should have a few #s then 2 or 3 letters .. http://www.nastyz28.com/chevy-engine-code-stampings.php Last edited by 70BLAZERX2; 01-08-2011 at 07:02 PM.

01-08-2011, 07:07 PM	#11
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 68 c20 4x4 parts truck $ 700 thanks __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-09-2011, 01:35 AM	#12
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 68 c20 4x4 parts truck $ 700 this needs to get saved from the crusher. soooooo sad. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-09-2011, 07:59 AM	#13
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: 68 c20 4x4 parts truck $ 700 If you're willing to sell some small parts, I might be interested in a few if it comes down to hauling it in. Let me know. Thanks

01-09-2011, 02:08 PM	#14
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 68 c20 4x4 parts truck $ 700 ttt sorry,no time to part out.was hoping someone close could use this and snatch it up. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-09-2011, 06:13 PM	#15
Jobe72 Registered User Join Date: Mar 2010 Location: Austin, TX Posts: 299	Re: 68 c20 4x4 parts truck $ 700 Is this your truck? I mean no disrespect but if you are going to take it to the crusher on Monday, why charge twice what you will get at the salvage yard? If you want it saved...sell it for scrap value. I know it's a free market, I would probably try and do the same...but I'd rather see it stripped for parts vs. smashed. __________________ 1972 GMC Sierra LWB (Aquafresh) 1962 Cadillac Convertible 1962 Cadillac Sedan project



Register or Log In To remove these advertisements.

01-09-2011, 09:31 PM	#16
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 68 c20 4x4 parts truck $ 700 I understand your response.no its not my truck.it showed up at my house yesterday with the local scrap guy.wanted to know if I needed any parts for our 67.since I didn't need anything I asked if I could put it on the site for someone.few extra bucks for me for my time dealing with it and a few for him.he's getting 400 +so tearing in to it to part it out ain't worth it, unless someone wanted to snatch it up.the price is reasonable for the parts, but I guess this one will be left for scrap. Posted via Mobile Device __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-09-2011, 09:53 PM	#17
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: 68 c20 4x4 parts truck $ 700 so sad if it was closer and a 71-72 it would have been worth the trip

01-11-2011, 04:13 PM	#18
devildawg12 Registered User Join Date: Mar 2010 Location: Sylacauga Alabama Posts: 14	Re: 68 c20 4x4 parts truck $ 700 Why is everything so far away from me, someone needs to buy this one

01-11-2011, 04:45 PM	#19
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,463	Re: 68 c20 4x4 parts truck $ 700 What scrape yard it going to...might give some more time to yank some parts __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-11-2011, 04:49 PM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 68 c20 4x4 parts truck $ 700 I'm lookin for a straight hood if it goes for parts. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-11-2011, 05:43 PM	#21
JibSheet Registered User Join Date: Aug 2010 Location: Coeur D'Alene, Idaho Posts: 33	Re: 68 c20 4x4 parts truck $ 700 Nice price for the parts, hate to scrap it. Would you be willing to take the front "C H E V R O L E T" lettering off the hood and ship? Wish I was closer I'd snatch it up!

01-11-2011, 09:36 PM	#22
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 68 c20 4x4 parts truck $ 700 thanks for all the replies.they took it to scrapyard this afternoon.thought about buying it myself and parting,but didnt know if i would ever make my money back on the parts since i didnt need to use any of them myself.oh well.....good bye old bowtie. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-11-2011, 09:45 PM	#23
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 68 c20 4x4 parts truck $ 700 Damn I would've taken the Transfer Case boot and ring...oh well

01-12-2011, 11:37 PM	#24
6768chevylover Registered User Join Date: May 2007 Location: nepa Posts: 745	Re: 68 c20 4x4 parts truck $ 700 what scrap yard did it go to? I live i milford pa. i was looking for a 4x4 rolling chassis. i just found this post and that sucks that its gone...

01-12-2011, 11:39 PM	#25
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: 68 c20 4x4 parts truck $ 700 "rip" __________________ "The Can't Family Lives Across The Street"

Register or Log In To remove these advertisements.