Throttle Pedal measurement needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cst350 · 04-29-2011, 08:35 PM

Can anyone measure the distance from the top edge of their gas pedal to the floor/carpet? My truck is a 69, without the cable.

Thanks
CST350

gonzo6869 · 04-29-2011, 09:52 PM

I don't have an answer for you, but maybe some more info from you to help someone answer it. Do you want this measurement to see how long of a cable you need? Are you trying to figure out the position of the pedal when you install your cable?

cst350 · 04-30-2011, 12:21 AM

I have the other style, the solid rod. The difference from stock is that I'm running a Demon carb, so I dont know how long to adjust the rod so the pedal is in the stock position.

**oldgold70c10** · 04-30-2011, 12:39 AM

If you use the factory adjustment method, I bet you can get close without measuring. Basically you just push the pedal till the lever hit the bump stop & hold it & with the carb at WOT adjust the thing on the rod till it goes in the hole on the throttle lever on the carb. Should put you in the ballpark.

04-29-2011, 08:35 PM	#1
cst350 Registered User Join Date: Dec 2003 Location: nor cal Posts: 219	Throttle Pedal measurement needed Can anyone measure the distance from the top edge of their gas pedal to the floor/carpet? My truck is a 69, without the cable. Thanks CST350

04-29-2011, 09:52 PM	#2
gonzo6869 Cops, ha, catch me if you can! Join Date: Jun 2009 Location: Santa Barbara, CA. Posts: 271	Re: Throttle Pedal measurement needed I don't have an answer for you, but maybe some more info from you to help someone answer it. Do you want this measurement to see how long of a cable you need? Are you trying to figure out the position of the pedal when you install your cable? __________________ 72 C-10 Stepper 350/TH350 3.73 in the back Edelbrock intake and Carb Hooker Comp Headers 275/60R15 on Rallies

04-30-2011, 12:21 AM	#3
cst350 Registered User Join Date: Dec 2003 Location: nor cal Posts: 219	Re: Throttle Pedal measurement needed I have the other style, the solid rod. The difference from stock is that I'm running a Demon carb, so I dont know how long to adjust the rod so the pedal is in the stock position.

04-30-2011, 12:39 AM	#4
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,025	Re: Throttle Pedal measurement needed If you use the factory adjustment method, I bet you can get close without measuring. Basically you just push the pedal till the lever hit the bump stop & hold it & with the carb at WOT adjust the thing on the rod till it goes in the hole on the throttle lever on the carb. Should put you in the ballpark. __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.