CA Parting 68 GMC Panel, patch panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jays68yak · 10-05-2011, 12:42 AM

Parting this panel out. Very little rust. Will be cutting this up and using part of the quarters to patch a bed I have, and the wheel wells.

Core support is not rusted out, is GMC but can be converted to chevy. $140
Drivers fender has some damage in the lower front corner, passanger side has a nut missing for the hood hinges. $50 each
Grill is kinda toasted. $30
Inner fenders, awesome shape. $140 for the pair. Pass side is not rusted.

Barn doors, complete, hinges, glass $200

hood $200

Anything else just ask. If you are looking for patches try to give me a picture of what you are looking for.

Rdrdave · 10-05-2011, 12:26 PM

Do you have both of the door strips above the door panel? If so, how much to 94579? Thanks

5150 · 10-05-2011, 04:21 PM

How about the gas neck area?

jays68yak · 10-06-2011, 10:48 AM

Quote:

Originally Posted by Rdrdave

Do you have both of the door strips above the door panel? If so, how much to 94579? Thanks

I have several sets. Are you looking for good stainless ones? Or good paintable ones?

Quote:

Originally Posted by 5150

How about the gas neck area?

Missing the filler neck, but your after the sheet metal?

Rdrdave · 10-06-2011, 10:52 AM

paintable is fine
Posted via Mobile Device

5150 · 10-06-2011, 10:57 AM

Looking for both, but will take what I can get.

jays68yak · 10-06-2011, 11:05 AM

Ok let me get pics for both of you tonight.

jays68yak · 10-07-2011, 10:53 AM

Quote:

Originally Posted by Rdrdave

paintable is fine
Posted via Mobile Device

I have a few,

Quote:

Originally Posted by 5150

Looking for both, but will take what I can get.

Inside, dent towards bottom

olblue60@aol.com · 10-07-2011, 06:14 AM

I'm interested in a cargo strip. Just one. it could be taped to a furring strip and shipped. Thanks

John

jays68yak · 10-07-2011, 10:46 AM

Quote:

Originally Posted by olblue60@aol.com

I'm interested in a cargo strip. Just one. it could be taped to a furring strip and shipped. Thanks

John

Id like to sell stuff like that as a complete set. Otherwise its harder to sell the others with one missing. Id like to get them out and make sure they are not trashed. Id do $30 plus shipping for them all.

5150 · 10-07-2011, 11:32 AM

Looks fine to me. How much? 37188

olblue60@aol.com · 10-07-2011, 04:56 PM

Are the cargo strips that bolt to the walls available as well or were they removed when the windows were installed? Thanks. I'll take the set of floor strips pending shipping to 20901 Thanks

John

jays68yak · 10-09-2011, 02:05 AM

Quote:

Originally Posted by olblue60@aol.com

Are the cargo strips that bolt to the walls available as well or were they removed when the windows were installed? Thanks. I'll take the set of floor strips pending shipping to 20901 Thanks

John

Lets do shipping and crating at $50, plus the parts $30, $80 total. Pretty much thinking about doing what you had said and nail them to some wood, but Id incase it somewhat. Ill update with a pic.

DINS 1 · 10-07-2011, 05:02 PM

tail light section on the drivers side from door opening to gas filler ares bottom of window down. please send pictures of under side of the corner and undrside of quarter panel. If you have a chance pm with a phone number and i will explain what i am looking for.

jays68yak · 10-07-2011, 10:57 PM

Quote:

Originally Posted by 5150

Looks fine to me. How much? 37188

How big of an area do you need? Are you patching one up or adding it to something?

Quote:

Originally Posted by olblue60@aol.com

Are the cargo strips that bolt to the walls available as well or were they removed when the windows were installed? Thanks. I'll take the set of floor strips pending shipping to 20901 Thanks

John

I think they are gone. Let me check tomorrow.

Quote:

Originally Posted by DINS 1

tail light section on the drivers side from door opening to gas filler ares bottom of window down. please send pictures of under side of the corner and undrside of quarter panel. If you have a chance pm with a phone number and i will explain what i am looking for.

Sending a pm

77chris03 · 10-07-2011, 11:17 PM

hows the hood pin assembly? pic? what about shipping to texas on the inner fenders?

Rdrdave · 10-07-2011, 11:43 PM

the top set looks like they.ll work. How much to 94579?
Posted via Mobile Device

jays68yak · 10-08-2011, 12:53 AM

Quote:

Originally Posted by 77chris03

hows the hood pin assembly? pic? what about shipping to texas on the inner fenders?

The pin assembly is staying on the hood for now, but I might have another. Ill have to look in my parts bin.

Shipping those fenders...hmm..any ideas on what carrier you would like?

Quote:

Originally Posted by Rdrdave

the top set looks like they.ll work. How much to 94579?
Posted via Mobile Device

$20

77chris03 · 10-08-2011, 01:01 AM

fed ex or greyhound??

DINS 1 · 10-08-2011, 07:51 AM

this picture of your other burb part out has this picture looks like a smaller piece but the same idea. i just want to go farther toward the gas filler and and up the post just a little bit more. i am wanting the drivers side.

http://67-72chevytrucks.com/vboard/s...2&postcount=29

Rdrdave · 10-09-2011, 01:33 AM

I.ll take them. Pm me your info and I.ll get to it tomorrow.
Posted via Mobile Device

jays68yak · 10-09-2011, 01:59 AM

Quote:

Originally Posted by 5150

Looks fine to me. How much? 37188

Quote:

Originally Posted by DINS 1

tail light section on the drivers side from door opening to gas filler ares bottom of window down. please send pictures of under side of the corner and undrside of quarter panel. If you have a chance pm with a phone number and i will explain what i am looking for.

Heres the parts for you guys. Do either of you need them smaller?
5150-yours is 10" wide, bottom to the bottom of the window.
DINS 1-yours is from his cut all the way back. Someone foamed a bunch of the crevasses, dunno if this is going to be an issue or not. Also noticed some damage where the bumper was.

The foam behind the tail light

Quote:

Originally Posted by 77chris03

fed ex or greyhound??

Let me figure out ups price. Thats who I use and they pick up from my work.

Quote:

Originally Posted by Rdrdave

I.ll take them. Pm me your info and I.ll get to it tomorrow.
Posted via Mobile Device

You have a pm

olblue60@aol.com · 10-09-2011, 07:11 AM

This is getting a little to pricy for me. Sorry to have put you to any bother. I have to pass.

**Classic Heartbeat** · 10-09-2011, 10:35 AM

How mutch for the barn doors and grill top bar? Shipped via Greyhound. Are they rust free? WES

jays68yak · 10-10-2011, 04:01 PM

Quote:

Originally Posted by Classic Heartbeat

How mutch for the barn doors and grill top bar? Shipped via Greyhound. Are they rust free? WES

I dunno about the barn doors. I looked at them closer as I was pulling them off and noticed several things.

upper hinge area

crack on inside of hinge mount

Bottom filled with foam, to where its hard to get the hinge out

cut outs and holes

Other side doesnt have the crack at the hinge, but the bottom is totally full of foam.

And I only have one piece of glass.

open to offers no em.

10-05-2011, 12:42 AM	#1
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,453	Parting 68 GMC Panel, patch panels Parting this panel out. Very little rust. Will be cutting this up and using part of the quarters to patch a bed I have, and the wheel wells. Core support is not rusted out, is GMC but can be converted to chevy. $140 Drivers fender has some damage in the lower front corner, passanger side has a nut missing for the hood hinges. $50 each Grill is kinda toasted. $30 Inner fenders, awesome shape. $140 for the pair. Pass side is not rusted. Barn doors, complete, hinges, glass $200 hood $200 Anything else just ask. If you are looking for patches try to give me a picture of what you are looking for. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

10-05-2011, 12:26 PM	#2
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: Parting 68 GMC Panel, patch panels Do you have both of the door strips above the door panel? If so, how much to 94579? Thanks

10-05-2011, 04:21 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Parting 68 GMC Panel, patch panels How about the gas neck area? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-06-2011, 10:52 AM	#5
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: Parting 68 GMC Panel, patch panels paintable is fine Posted via Mobile Device

10-06-2011, 10:57 AM	#6
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Parting 68 GMC Panel, patch panels Looking for both, but will take what I can get. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-06-2011, 11:05 AM	#7
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,453	Re: Parting 68 GMC Panel, patch panels Ok let me get pics for both of you tonight. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

10-07-2011, 06:14 AM	#9
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Parting 68 GMC Panel, patch panels I'm interested in a cargo strip. Just one. it could be taped to a furring strip and shipped. Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

10-07-2011, 11:32 AM	#11
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Parting 68 GMC Panel, patch panels Looks fine to me. How much? 37188 __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-07-2011, 04:56 PM	#12
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Parting 68 GMC Panel, patch panels Are the cargo strips that bolt to the walls available as well or were they removed when the windows were installed? Thanks. I'll take the set of floor strips pending shipping to 20901 Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

10-07-2011, 05:02 PM	#14
DINS 1 Registered User Join Date: Apr 2000 Location: Webster City, Iowa USA Posts: 572	Re: Parting 68 GMC Panel, patch panels tail light section on the drivers side from door opening to gas filler ares bottom of window down. please send pictures of under side of the corner and undrside of quarter panel. If you have a chance pm with a phone number and i will explain what i am looking for. Attached Images __________________ Wade "DURAMAX BURB" Burb on 2004 chevy 2500HD 4x4 Duramax chassis Long term project 2004 2500HD 4x4 crew cab GMC Duramax 4" lift 35's 79 RS Camaro Last edited by DINS 1; 10-08-2011 at 07:49 AM.

10-07-2011, 11:17 PM	#16
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: Parting 68 GMC Panel, patch panels hows the hood pin assembly? pic? what about shipping to texas on the inner fenders? __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

10-07-2011, 11:43 PM	#17
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: Parting 68 GMC Panel, patch panels the top set looks like they.ll work. How much to 94579? Posted via Mobile Device

10-08-2011, 01:01 AM	#19
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: Parting 68 GMC Panel, patch panels fed ex or greyhound?? __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

10-08-2011, 07:51 AM	#20
DINS 1 Registered User Join Date: Apr 2000 Location: Webster City, Iowa USA Posts: 572	Re: Parting 68 GMC Panel, patch panels this picture of your other burb part out has this picture looks like a smaller piece but the same idea. i just want to go farther toward the gas filler and and up the post just a little bit more. i am wanting the drivers side. http://67-72chevytrucks.com/vboard/s...2&postcount=29 __________________ Wade "DURAMAX BURB" Burb on 2004 chevy 2500HD 4x4 Duramax chassis Long term project 2004 2500HD 4x4 crew cab GMC Duramax 4" lift 35's 79 RS Camaro

10-09-2011, 01:33 AM	#21
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: Parting 68 GMC Panel, patch panels I.ll take them. Pm me your info and I.ll get to it tomorrow. Posted via Mobile Device



Register or Log In To remove these advertisements.

10-09-2011, 07:11 AM	#23
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Parting 68 GMC Panel, patch panels This is getting a little to pricy for me. Sorry to have put you to any bother. I have to pass. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

10-09-2011, 10:35 AM	#24
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Parting 68 GMC Panel, patch panels How mutch for the barn doors and grill top bar? Shipped via Greyhound. Are they rust free? WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-09-2011 at 10:42 AM.

Register or Log In To remove these advertisements.