Motor's almost complete - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alf4444 · 04-17-2003, 09:38 AM

Here it is have a little bit more done since the pic was taken but do you think, its nice to have progress.

http://community.webshots.com/script...ecurity=PvQshl

and here proof you do become 10 foot tall when drinking beer! Pic was taken while we were pulling the old motor. I'm the fat bald kid in the back.

http://community.webshots.com/script...ecurity=NfIGIa

Low87 · 04-17-2003, 09:39 AM

Didn't work, this is what I got;
Webshots Community Error
A problem has been detected.

You do not appear to be the owner of this album.
Make sure you are logged in.

alf4444 · 04-17-2003, 10:15 AM

try this
http://community.webshots.com/photo/...69888582PvQshl

http://community.webshots.com/photo/...69888596NfIGIa

Low87 · 04-17-2003, 11:44 AM

Looks good, but I think that 2nd motor has seen better days!

(psst, clean up your firewall!)

*rage'nrat638* · 04-17-2003, 11:48 AM

wow... i thought i was at the home shopping club

alf4444 · 04-17-2003, 11:52 AM

he's more of a tool than a motor!

alf4444 · 04-20-2003, 11:31 PM

didn't really feel a need to clean up the firewall to much, need to get this thing running so i can finish other projects

Mike76251 · 04-21-2003, 03:18 AM

Neat shots,
That intake looks good for sure.

As for testing a body harness on a engine crane,
Don't worry.......it will hold your weight.
That is it will until you are six hundred feet off the ground and really need it. (!)
Thanks for the shots,
Mike

MSL · 04-21-2003, 04:34 AM

Like those valve covers.also what manifold are you using.?

alf4444 · 04-21-2003, 09:32 AM

Got the valve covers on ebay for 17 bucks shipped. The intake is a edelbrock street master (powder coated and twenty years old but no carbon build up) got it for 60 with a holley 600 double pumper. Everything else is brand new, the only thing I didn't replace is the alternator power steering pump (i am replacing the lines) and starter, if anyone needs 400 sbc parts i got em.

Cole's 87 · 04-21-2003, 10:13 AM

Looks pretty sharp!!!!! I wish they made some valve covers like that for a big block.

The other pic. That is probbly the best use for a rose harrness I've seen. To help move drunk buddies that come over to help, but end up drinking all your beer.........Am I close??

alf4444 · 04-21-2003, 10:22 AM

It was an easy way to keep him from getting into trouble and out of the fridge.

*Randy70C-10* · 04-21-2003, 10:59 AM

Looks good!

MSL · 04-21-2003, 06:20 PM

I thought that was a streetmaster i have one just like it that i pulled of my truck. thats a good deal on all of that.

Nvbowtie · 04-22-2003, 05:16 AM

Looks good,

I wish I was at that stage of my project, well in a few months maybe....

04-17-2003, 09:38 AM	#1
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Motor's almost complete Here it is have a little bit more done since the pic was taken but do you think, its nice to have progress. http://community.webshots.com/script...ecurity=PvQshl and here proof you do become 10 foot tall when drinking beer! Pic was taken while we were pulling the old motor. I'm the fat bald kid in the back. http://community.webshots.com/script...ecurity=NfIGIa __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-17-2003, 09:39 AM	#2
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Didn't work, this is what I got; Webshots Community Error A problem has been detected. You do not appear to be the owner of this album. Make sure you are logged in. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-17-2003, 10:15 AM	#3
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	try this http://community.webshots.com/photo/...69888582PvQshl http://community.webshots.com/photo/...69888596NfIGIa __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-17-2003, 11:44 AM	#4
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Looks good, but I think that 2nd motor has seen better days! (psst, clean up your firewall!) __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-17-2003, 11:52 AM	#6
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	he's more of a tool than a motor! __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-17-2003, 11:48 AM	#5
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	wow... i thought i was at the home shopping club

04-20-2003, 11:31 PM	#7
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	didn't really feel a need to clean up the firewall to much, need to get this thing running so i can finish other projects __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-21-2003, 03:18 AM	#8
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	Neat shots, That intake looks good for sure. As for testing a body harness on a engine crane, Don't worry.......it will hold your weight. That is it will until you are six hundred feet off the ground and really need it. (!) Thanks for the shots, Mike

04-21-2003, 04:34 AM	#9
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Like those valve covers.also what manifold are you using.?

04-21-2003, 09:32 AM	#10
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Got the valve covers on ebay for 17 bucks shipped. The intake is a edelbrock street master (powder coated and twenty years old but no carbon build up) got it for 60 with a holley 600 double pumper. Everything else is brand new, the only thing I didn't replace is the alternator power steering pump (i am replacing the lines) and starter, if anyone needs 400 sbc parts i got em. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-21-2003, 10:13 AM	#11
Cole's 87 Registered User Join Date: Nov 2002 Posts: 272	Looks pretty sharp!!!!! I wish they made some valve covers like that for a big block. The other pic. That is probbly the best use for a rose harrness I've seen. To help move drunk buddies that come over to help, but end up drinking all your beer.........Am I close?? Last edited by Cole's 87; 04-21-2003 at 10:17 AM.

04-21-2003, 10:22 AM	#12
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	It was an easy way to keep him from getting into trouble and out of the fridge. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-21-2003, 10:59 AM	#13
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Looks good!

04-21-2003, 06:20 PM	#14
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	I thought that was a streetmaster i have one just like it that i pulled of my truck. thats a good deal on all of that.

04-22-2003, 05:16 AM	#15
Nvbowtie Registered User Join Date: Jul 2001 Location: Laughlin, Nv. USA Posts: 700	wishing,wanting, & wondering Looks good, I wish I was at that stage of my project, well in a few months maybe.... __________________ www.unlimited2u.com/chevy Bill 1980 Chevy C-10 Silverado 1988 Chevy Blazer Tahoe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.