Restored my 72 Woodgrain Glovebox Door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 11-19-2011, 03:57 AM

I haven't updated my build thread in a while, due to work, family, and life in general...but I have still been hard at work on the finishing touches

I found an aftermarket woodgrain decal in my parts stash and decided to give it a try...since the NOS one would run me $$$. I do not know if the woodgrain is "correct", but it does match the aftermarket door panels and the applique I have on deck for the gauge cluster. I am pretty happy that I have made aftermarket parts work.

ls1nova71 · 11-19-2011, 04:54 AM

Wow that looks pretty good! Do you know what brand it was? I had to do mine twice due to the fact that the first one was too small. Had to get the one that's designed to be put on the glovebox door without the aluminum piece because it was bigger then had to trim to fit. Was a real pita.
Posted via Mobile Device

*project 67 sub* · 11-19-2011, 04:57 AM

sweet

VA72C10 · 11-19-2011, 05:33 AM

That looks really good!

heeroyue2002 · 11-19-2011, 06:29 AM

that looks good!

teeitup · 11-19-2011, 09:46 AM

Looks GREAT Scott, good job!!!!!

**screaminchevypickup** · 11-19-2011, 10:15 AM

Nice!!! Looks good to me..
Posted via Mobile Device

**DeadheadNM** · 11-19-2011, 10:49 AM

Any tips/tricks to the install? Was it difficult to set the decal into the recess where the latch is? You've inspired me to make use of the decal I've got sitting on my shelf.

eightbanger · 11-19-2011, 12:47 PM

Is the decal faded LZ, or are your photography skills not what they should be?

71 super · 11-19-2011, 01:05 PM

Scott that is a very nice job! Keep it up, I want to see the new dash when installed

**leddzepp** · 11-19-2011, 11:17 PM

First off, thanks for all of the compliments!

Quote:

Originally Posted by ls1nova71

Wow that looks pretty good! Do you know what brand it was? I had to do mine twice due to the fact that the first one was too small. Had to get the one that's designed to be put on the glovebox door without the aluminum piece because it was bigger then had to trim to fit. Was a real pita.
Posted via Mobile Device

I believe it was an older Re-Pop brand, which means it was made in the USA

It fit very well, the dimensions were near exact.

Quote:

Originally Posted by DeadheadNM

Any tips/tricks to the install? Was it difficult to set the decal into the recess where the latch is? You've inspired me to make use of the decal I've got sitting on my shelf.

Pete- This was the question I was waiting for. If anyone has ever tried to apply one of these, the recess presents a problem. The decal comes with a small hole, just big enough for the actual button to fit through...so how do you get it to conform to the recess? It is somewhat rigid material so it does not flex. I have seen where others cut the hole larger, or cut slits around the edge, either way it ends up looking like crap so...

I removed the the latch assembly (and Super emblem), and applied the decal. I then held the door upside down while I CAREFULLY used a Bic lighter to heat it up where it sits above the recess. I then set it down and using my thumb, I worked around it in a circle, pressing down firmly. The trick is to get it hot enough to "stretch" the material, but not melt the decal. It will conform to the recess and sticks permanently. After that, I just pushed the latch through and reattached it. IMO it came out perfectly and looks like it left the factory that way.

Quote:

Originally Posted by eightbanger

Is the decal faded LZ, or are your photography skills not what they should be?

Nigel- My photo skills suck

I did not use a flash, so the pics are a little blurry. Thanks for the offer on the Emblem, but mine does look better in person than the pics show.

Quote:

Originally Posted by 71 super

Scott that is a very nice job! Keep it up, I want to see the new dash when installed

Thanks Harold! I am tackling a bezel next and will use the same technique with a lighter to get the decal to conform and stick. May be a bit before I get it installed. I have one that I already did in there now...wish I would have used the decal on a better bezel, but this will give me a chance to try a new way of attaching it too.

ChevLoRay · 11-19-2011, 11:24 PM

Looks good to me. If it matches your door panels and the part you will use on the instrument cluster, what's the problem?

A friend gave me a full roll of DyNoc vinyl in a GM parts "tube" that is from the mid-Seventies and intended for use on the exterior of one of the GM wagons with woodgrain. I have debated with myself about using it to do my cluster and glovebox door. I have door panels from a '70 that have the woodgrain strip below the window, so thinking about making it all match. I don't have a Cheyenne, but a Custom DeLuxe. Since it isn't a resto, what difference will it make to me? It'll look good. Besides, woodgrain was a big styling gimmick in the mid-Seventies and it won't look like it is from the wrong era.

**FleetsidePaul** · 11-19-2011, 03:36 PM

Look's good Scott.

redbaron69 · 11-19-2011, 07:50 PM

looks great.

**lolife99** · 11-19-2011, 07:53 PM

Great Job.
I want a Cheyenne Super,...

sleepertruck72 · 11-19-2011, 08:06 PM

Looks GREAT Scott

Awesome job as usual !

chipflyer · 11-19-2011, 08:09 PM

Nice work Scott!

eightbanger · 11-19-2011, 08:34 PM

If that decal is faded mate, I have a perfectly good repro one you can have...FOC, I bought it from Classic Parts back when I had no idea that having a Cheyenne did not necessarily mean it was a super

Anyway it's yours if you want it...gives me a chance to pay it forward after board member CG did the same for me recently.

lil hoodlum · 11-19-2011, 10:37 PM

Very impressive LeddZepp! Looks good!

Keith

72BlckButy · 11-20-2011, 01:15 AM

Nice work LZ!

**71blksuper4x4** · 11-20-2011, 03:46 AM

Nice work Scot, I will put in my 2 cents about getting that area around the glovebox lock button stuck down. Use a heat gun, and they will lay out very nice. Trevor

srea76 · 11-20-2011, 10:52 AM

I have to redo my box to with woodgrain. How do you attach the emblem and how where they originally attached from the factory?

**leddzepp** · 11-20-2011, 11:09 AM

Quote:

Originally Posted by 71blksuper4x4

Nice work Scot, I will put in my 2 cents about getting that area around the glovebox lock button stuck down. Use a heat gun, and they will lay out very nice. Trevor

Thanks Trevor- I thought about that at first....but I do not own a heat gun, so I busted out the Bic.

I am very happy with how this came out.

Quote:

Originally Posted by srea76

I have to redo my box to with woodgrain. How do you attach the emblem and how where they originally attached from the factory?

The emblem is attached with barrell clips. I removed it carefully by prying it off with a butter knife, working around it. After attaching the decal, it just presses back in.

11-19-2011, 03:57 AM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,036	Restored my 72 Woodgrain Glovebox Door I haven't updated my build thread in a while, due to work, family, and life in general...but I have still been hard at work on the finishing touches I found an aftermarket woodgrain decal in my parts stash and decided to give it a try...since the NOS one would run me $$$. I do not know if the woodgrain is "correct", but it does match the aftermarket door panels and the applique I have on deck for the gauge cluster. I am pretty happy that I have made aftermarket parts work. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-19-2011, 04:54 AM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Restored my 72 Woodgrain Glovebox Door Wow that looks pretty good! Do you know what brand it was? I had to do mine twice due to the fact that the first one was too small. Had to get the one that's designed to be put on the glovebox door without the aluminum piece because it was bigger then had to trim to fit. Was a real pita. Posted via Mobile Device

11-19-2011, 04:57 AM	#3
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Restored my 72 Woodgrain Glovebox Door sweet

11-19-2011, 05:33 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Restored my 72 Woodgrain Glovebox Door That looks really good! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-19-2011, 06:29 AM	#5
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: Restored my 72 Woodgrain Glovebox Door that looks good! __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-19-2011, 09:46 AM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Restored my 72 Woodgrain Glovebox Door Looks GREAT Scott, good job!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-19-2011, 10:15 AM	#7
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Restored my 72 Woodgrain Glovebox Door Nice!!! Looks good to me.. Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

11-19-2011, 10:49 AM	#8
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Restored my 72 Woodgrain Glovebox Door Any tips/tricks to the install? Was it difficult to set the decal into the recess where the latch is? You've inspired me to make use of the decal I've got sitting on my shelf. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-19-2011, 12:47 PM	#9
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Restored my 72 Woodgrain Glovebox Door Is the decal faded LZ, or are your photography skills not what they should be? __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

11-19-2011, 01:05 PM	#10
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Restored my 72 Woodgrain Glovebox Door Scott that is a very nice job! Keep it up, I want to see the new dash when installed __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

11-19-2011, 11:24 PM	#12
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Restored my 72 Woodgrain Glovebox Door Looks good to me. If it matches your door panels and the part you will use on the instrument cluster, what's the problem? A friend gave me a full roll of DyNoc vinyl in a GM parts "tube" that is from the mid-Seventies and intended for use on the exterior of one of the GM wagons with woodgrain. I have debated with myself about using it to do my cluster and glovebox door. I have door panels from a '70 that have the woodgrain strip below the window, so thinking about making it all match. I don't have a Cheyenne, but a Custom DeLuxe. Since it isn't a resto, what difference will it make to me? It'll look good. Besides, woodgrain was a big styling gimmick in the mid-Seventies and it won't look like it is from the wrong era. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

11-19-2011, 03:36 PM	#13
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,418	Re: Restored my 72 Woodgrain Glovebox Door Look's good Scott. __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

11-19-2011, 07:50 PM	#14
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: Restored my 72 Woodgrain Glovebox Door looks great. __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

11-19-2011, 07:53 PM	#15
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Restored my 72 Woodgrain Glovebox Door Great Job. I want a Cheyenne Super,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-19-2011, 08:06 PM	#16
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: Restored my 72 Woodgrain Glovebox Door Looks GREAT Scott Awesome job as usual ! __________________ 72 C20 Longbed 05 1500 Z71



Register or Log In To remove these advertisements.

11-19-2011, 08:09 PM	#17
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Restored my 72 Woodgrain Glovebox Door Nice work Scott! __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

11-19-2011, 08:34 PM	#18
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Restored my 72 Woodgrain Glovebox Door If that decal is faded mate, I have a perfectly good repro one you can have...FOC, I bought it from Classic Parts back when I had no idea that having a Cheyenne did not necessarily mean it was a super Anyway it's yours if you want it...gives me a chance to pay it forward after board member CG did the same for me recently. Attached Images __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

11-19-2011, 10:37 PM	#19
lil hoodlum Registered User Join Date: Oct 2009 Location: Denton, Texas Posts: 1,735	Re: Restored my 72 Woodgrain Glovebox Door Very impressive LeddZepp! Looks good! Keith

11-20-2011, 01:15 AM	#20
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Restored my 72 Woodgrain Glovebox Door Nice work LZ! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-20-2011, 03:46 AM	#21
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Restored my 72 Woodgrain Glovebox Door Nice work Scot, I will put in my 2 cents about getting that area around the glovebox lock button stuck down. Use a heat gun, and they will lay out very nice. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-20-2011, 10:52 AM	#22
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Restored my 72 Woodgrain Glovebox Door I have to redo my box to with woodgrain. How do you attach the emblem and how where they originally attached from the factory? __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

Register or Log In To remove these advertisements.