|
|
|
09-05-2012, 02:41 AM
|
#1 |
|
Registered User
Join Date: Feb 2009
Location: slurrey, bc.
Posts: 1,134
|
longer studs?
looking for some longer studs using the stock knurl dia.
i haven't been able to find any.. I drilled out the back for bigger ones but don't want to drill out the fronts if i don't have to.. anyone actually make one?
__________________
-'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler. |
|
|
|
09-05-2012, 11:21 AM
|
#2 |
|
A day should have 30 hours.
Join Date: Jul 2005
Location: BC, Canada
Posts: 248
|
Re: longer studs?
I once had to get longer ones for the front.
Pressed out the original, walked down to Lordco......... or was it NAPA, either one. They will measure it up and look thru their book for a longer one. Or measure it up yourself, if you have a digital caliper and look on summit's website for a part number, then drive down to Mopac or Lordco and get some. If I remember correctly for a 1.25" front rotor its a 0.620" knurl But better double check Hope it helps |
|
|
|
|
09-05-2012, 12:35 PM
|
#3 |
|
At the body shop.
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,254
|
Re: longer studs?
__________________
" That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 09-05-2012 at 12:41 PM. |
|
|
|
|
09-05-2012, 12:55 PM
|
#4 |
|
Registered User
Join Date: Jul 2011
Location: El Campo, Tx
Posts: 1,246
|
Re: longer studs?
Moser Engineering 8250 - Moser Engineering Wheel Studs
http://www.summitracing.com/parts/MSR-8250/ These are the ones that I got from Summit. They have a 0.625 knurl (versus the 0.619 stock one) and are 1.938 inches long (underhead length), perfect for my billet wheels. I have the HD rotors up front. Dorman or anyone else that I could find does not make a longer one, I did a crap load of research for this. I am putting these in both the back and the front. Plus they are from Moser so you know they are very high quality. Hope this helps.
__________________
72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!! |
|
|
|
|
09-06-2012, 09:58 PM
|
#5 |
|
Registered User
Join Date: Jul 2011
Location: El Campo, Tx
Posts: 1,246
|
Re: longer studs?
Before you rush out to by these I need to check and make sure that they work on mine! Got them today from Summit and they are not threaded up all the way to the head. There is 3/4 of an inch under the head that is not threaded. I will check on Monday to see if they work fine or not
__________________
72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!! |
|
|
|
|
09-19-2012, 11:50 AM
|
#6 |
|
Registered User
Join Date: Jul 2011
Location: El Campo, Tx
Posts: 1,246
|
Re: longer studs?
Just an update on the studs. These worked perfectly for my billet wheels. Didn't have to drill out the rotors or antthing
Posted via Mobile Device
__________________
72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!! |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
