anybody use chevelle exhaust kit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RustyHunk-O-JunkGuy · 10-28-2012, 07:08 PM

Quick and easy exhaust question, actually two.

1. Anybody use a kit for the A body on there 2wd with any luck? Want to do 2 1/2" kit on the Burb, but the lack of kits out there for these trucks is lame. How easy was yours? Have to modify much? I'm running mid-lengths, a H-pipe and Cherry Bombs so I was planning on some mods, but wondering ho close the axle bends were.

2. Any have any luck with "header buddies", those belled flange jobs for the collector connection. I've only ever used the old three bolt flanges and gaskets. Ya, constantly fighting the exhaust leaks gets old fast.

Thanks guys

vectorit · 10-28-2012, 07:12 PM

If I were you, I would just take it to a local muffler shop and have them set you up with a nice system made to your liking.

Oh, and get rid of the headers and put the OE exhaust manifolds in again.
Headers are more trouble than what they are worth.

RustyHunk-O-JunkGuy · 10-28-2012, 07:51 PM

All the muffler shops around here to crappy work or you have to pay to much for a higher end shop, which I'm not down for. I've got no problem with the fab work, that's what I do for a living anyway. I just was wondering mainly about the bends around the axle/springs/shock mounts.

gringoloco · 10-30-2012, 10:00 AM

I've had good luck with the Flowmaster DIY mandrel bent kits. Takes some fab work, but the finished product is worth the effort.

Street Smart · 10-30-2012, 04:33 PM

The flowmaster kits use heavy, coated pipes and really last.

Kevin McPherson · 10-30-2012, 07:43 PM

I have had better luck getting 3 bolt flanges to seal with a steel donut gasket.just make sure the gasket doesnt fit into the pipe

RustyHunk-O-JunkGuy · 11-01-2012, 01:05 AM

Checked the Flowmaster kit on Summit, it lists as 16 ga. tube. LMC sells a kit but it comes in 2 1/4" only, also listed as 16 ga. with glass packs and no H-pipe for $189.95. Summit wants $260 for the 2 1/4" kit and $280 for the 2 1/2".
Anybody ever use the LMC kit? I'd would probably be swapping out the glass pack for some Cherry Bombs anyway so I'm not to worried about the mufflers that come with it.

notsolo · 12-28-2012, 02:03 PM

I used a 2 1/2" stainless Magnaflow kit for a Chevelle on my blazer. custom cut and fit... added a few extra clamps custom made hangers ..Cost about $585 delivered

RustyHunk-O-JunkGuy · 01-01-2013, 03:29 PM

How were those axle bends?

notsolo · 01-04-2013, 07:05 PM

I thought it was good...I can get you a photo from the bottom side if you like..the only shot I have of the rear is distant.. shocks are green...urethane hanger bushings red.

10-28-2012, 07:08 PM	#1
RustyHunk-O-JunkGuy Registered User Join Date: Feb 2011 Location: Sparks,NV Posts: 17	anybody use chevelle exhaust kit? Quick and easy exhaust question, actually two. 1. Anybody use a kit for the A body on there 2wd with any luck? Want to do 2 1/2" kit on the Burb, but the lack of kits out there for these trucks is lame. How easy was yours? Have to modify much? I'm running mid-lengths, a H-pipe and Cherry Bombs so I was planning on some mods, but wondering ho close the axle bends were. 2. Any have any luck with "header buddies", those belled flange jobs for the collector connection. I've only ever used the old three bolt flanges and gaskets. Ya, constantly fighting the exhaust leaks gets old fast. Thanks guys

10-28-2012, 07:12 PM	#2
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: anybody use chevelle exhaust kit? If I were you, I would just take it to a local muffler shop and have them set you up with a nice system made to your liking. Oh, and get rid of the headers and put the OE exhaust manifolds in again. Headers are more trouble than what they are worth. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

10-28-2012, 07:51 PM	#3
RustyHunk-O-JunkGuy Registered User Join Date: Feb 2011 Location: Sparks,NV Posts: 17	Re: anybody use chevelle exhaust kit? All the muffler shops around here to crappy work or you have to pay to much for a higher end shop, which I'm not down for. I've got no problem with the fab work, that's what I do for a living anyway. I just was wondering mainly about the bends around the axle/springs/shock mounts.

10-30-2012, 10:00 AM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: anybody use chevelle exhaust kit? I've had good luck with the Flowmaster DIY mandrel bent kits. Takes some fab work, but the finished product is worth the effort. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-30-2012, 04:33 PM	#5
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: anybody use chevelle exhaust kit? The flowmaster kits use heavy, coated pipes and really last. __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

10-30-2012, 07:43 PM	#6
Kevin McPherson Registered User Join Date: Apr 2009 Location: North east Arkansas Posts: 118	Re: anybody use chevelle exhaust kit? I have had better luck getting 3 bolt flanges to seal with a steel donut gasket.just make sure the gasket doesnt fit into the pipe

11-01-2012, 01:05 AM	#7
RustyHunk-O-JunkGuy Registered User Join Date: Feb 2011 Location: Sparks,NV Posts: 17	Re: anybody use chevelle exhaust kit? Checked the Flowmaster kit on Summit, it lists as 16 ga. tube. LMC sells a kit but it comes in 2 1/4" only, also listed as 16 ga. with glass packs and no H-pipe for $189.95. Summit wants $260 for the 2 1/4" kit and $280 for the 2 1/2". Anybody ever use the LMC kit? I'd would probably be swapping out the glass pack for some Cherry Bombs anyway so I'm not to worried about the mufflers that come with it.

12-28-2012, 02:03 PM	#8
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,485	Re: anybody use chevelle exhaust kit? I used a 2 1/2" stainless Magnaflow kit for a Chevelle on my blazer. custom cut and fit... added a few extra clamps custom made hangers ..Cost about $585 delivered Attached Images

01-01-2013, 03:29 PM	#9
RustyHunk-O-JunkGuy Registered User Join Date: Feb 2011 Location: Sparks,NV Posts: 17	Re: anybody use chevelle exhaust kit? How were those axle bends?

01-04-2013, 07:05 PM	#10
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,485	Re: anybody use chevelle exhaust kit? I thought it was good...I can get you a photo from the bottom side if you like..the only shot I have of the rear is distant.. shocks are green...urethane hanger bushings red. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.