CA Pinion angle shims, bumpstops - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 11-23-2012, 12:43 AM

Here is a set of 5 degree pinion angle shims for lowered trucks. They will also lower your truck an additional 1/2 inch. Included is a set of bumpstops that can be used inside of a c-notch, or bottom of the frame rail if not running a c-notch. $40 Shipped in the USA for all.
Posted via Mobile Device
Posted via Mobile Device

**leddzepp** · 11-25-2012, 10:51 PM

Bump.
Posted via Mobile Device

budnikguy · 11-25-2012, 11:23 PM

Hey man, how much picked up?!
Posted via Mobile Device

HotRod C/10 · 11-25-2012, 11:27 PM

Are these for coil spring trucks?

**leddzepp** · 11-26-2012, 12:30 AM

Quote:

Originally Posted by budnikguy

Hey man, how much picked up?!
Posted via Mobile Device

.

Adam- ill do $30 picked up.

Quote:

Originally Posted by HotRod C/10

Are these for coil spring trucks?

They will work for both I believe. I had them on a coil sprung truck, but I think they will work for a leaf sprung truck, as the hole in the center would allow it to be centered on the pin used in leaf springs.
Posted via Mobile Device

budnikguy · 11-26-2012, 01:18 AM

COOL, pm me your # and I will make time to stop by!

11-23-2012, 12:43 AM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,036	Pinion angle shims, bumpstops Here is a set of 5 degree pinion angle shims for lowered trucks. They will also lower your truck an additional 1/2 inch. Included is a set of bumpstops that can be used inside of a c-notch, or bottom of the frame rail if not running a c-notch. $40 Shipped in the USA for all. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-25-2012, 10:51 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,036	Re: Pinion angle shims, bumpstops Bump. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-25-2012, 11:23 PM	#3
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Pinion angle shims, bumpstops Hey man, how much picked up?! Posted via Mobile Device

11-25-2012, 11:27 PM	#4
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Pinion angle shims, bumpstops Are these for coil spring trucks? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-26-2012, 01:18 AM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Pinion angle shims, bumpstops COOL, pm me your # and I will make time to stop by!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.