Van Tilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cdowns · 06-11-2003, 02:18 PM

i have a van tilt in good usable condition came out of I THINK 78 1ton van $120 shipping included to the 48states only if interested give me email address and i'll send pictures

69chevyc20 · 06-12-2003, 09:31 AM

cb6d@planttel.net

cdowns · 06-12-2003, 07:41 PM

forgot to mention this has a cruise-control in the turnsignal lever, but it's just a 1wire deal to disconnect[or you can use it for a switch for a horn or setup a set of spots that you can use for flickin on and off with your fingertip!! disconnecting the 1wire and you can use the regular turn lever

Longhorn Man · 06-12-2003, 08:00 PM

Not to jump on his thread, but the cruise controll switch can actually controll 2 seperate items. It is a 3 position switch, off, 1/2 way in (one item) and all the way in (second item).
Also, with the steering wheel off, you can remove it and all its wireing and install your stock turn signal switch very easily.

cdowns · 06-12-2003, 08:57 PM

hey i just looked again and longhorns right !! but you dont have to change the turnsignal switch just the lever to a normal lever if you don't want the cruise lever

06-11-2003, 02:18 PM	#1
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Van Tilt i have a van tilt in good usable condition came out of I THINK 78 1ton van $120 shipping included to the 48states only if interested give me email address and i'll send pictures __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-12-2003, 09:31 AM	#2
69chevyc20 Registered User Join Date: Jun 2003 Location: Omega, GA 31775 Posts: 6	cb6d@planttel.net __________________ 69 chevy C20 307/3 speed 4.10 posi.

06-12-2003, 07:41 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	forgot to mention this has a cruise-control in the turnsignal lever, but it's just a 1wire deal to disconnect[or you can use it for a switch for a horn or setup a set of spots that you can use for flickin on and off with your fingertip!! disconnecting the 1wire and you can use the regular turn lever __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-12-2003, 08:57 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	hey i just looked again and longhorns right !! but you dont have to change the turnsignal switch just the lever to a normal lever if you don't want the cruise lever __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-12-2003, 08:00 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Not to jump on his thread, but the cruise controll switch can actually controll 2 seperate items. It is a 3 position switch, off, 1/2 way in (one item) and all the way in (second item). Also, with the steering wheel off, you can remove it and all its wireing and install your stock turn signal switch very easily.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.