AZ 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 05-19-2013, 07:24 PM

Lowered Price = $500 shipped in the CONUS

Trying to sell some extra parts before I move. Up for sale is a 8 cyl tach instrument cluster with vac and 80 lb oil pressure gauge that I restored for my truck but didn't end up using. It is all original GM parts except the new bezel and a couple rubber grommets. I repainted all of the needles (they are all the same color, the camera flash made them look different), cleaned the gauge faces, stripped and repainted the inner and outer tins, lightly polished the lens and replaced the bezel. I even repainted the faded red mark in the temp gauge. I didn't reset the mileage to zero, I'm not sure how to do that besides a drill and that takes forever.

I installed it in my truck and verified everything is fully functional. I hooked up a vacuum pump to the vacuum gauge to make sure it works since my truck isn't plumbed for a vacuum gauge. I will include a new tach harness with it as well. $550 shipped to your door

**Ol Blue K20** · 05-21-2013, 12:24 PM

It's gorgeous, just not in the budget at this time. Here's a bump for ya!

Critterman71 · 05-21-2013, 02:01 PM

Thats exactly what I want for my truck, is there any thing you still need for your may be a partial trade and cash if I have something that you need?

mahanian · 05-21-2013, 04:06 PM

Unless you have a NOS 1967 Camaro passenger side quarter panel I can't think of anything else I need right now

Critterman71 · 05-21-2013, 04:24 PM

As a matter of fact I think no just kidding LOL I understand I will try to come up with the dough good luck on the sale in the mean time

mahanian · 05-22-2013, 04:25 PM

Quote:

Originally Posted by Critterman71

As a matter of fact I think no just kidding LOL I understand I will try to come up with the dough good luck on the sale in the mean time

That would have been too good to be true!

Sure would like to see this go to a good home

mahanian · 06-29-2013, 05:09 PM

Price drop - $500 shipped, I'm losing money at that price

rjmose · 06-30-2013, 10:50 AM

8IQAP!z

mahanian · 06-30-2013, 12:01 PM

Quote:

Originally Posted by rjmose

8IQAP!z

??
Posted via Mobile Device

Beat68CST · 07-03-2013, 03:33 PM

Any chance you have a diesel tach?

*Jdbfish* · 07-08-2013, 04:13 PM

Pm inbound
Posted via Mobile Device

mahanian · 07-08-2013, 05:11 PM

Still available

mahanian · 09-21-2013, 05:46 PM

ttt

mahanian · 09-27-2013, 06:02 PM

ttt

mahanian · 11-05-2013, 03:43 PM

ttt

kaphillips · 11-06-2013, 04:39 PM

Would you take $450 shipped to Amarillo TX 79106, pretty please with sugar on top. Hey I am going to go pickup some truck parts from a man that has thousands of square feet of nos parts to include sheet metal in 3-4 weeks. He is into Camaros and Chevelles I bet he has your nos 67 passenger fender, I will ask him. What would be a fair price for that fender? I purchased a complete front nos clip for a 70 pickup from him.

mahanian · 11-06-2013, 07:32 PM

Quote:

Originally Posted by kaphillips

Would you take $450 shipped to Amarillo TX 79106, pretty please with sugar on top. Hey I am going to go pickup some truck parts from a man that has thousands of square feet of nos parts to include sheet metal in 3-4 weeks. He is into Camaros and Chevelles I bet he has your nos 67 passenger fender, I will ask him. What would be a fair price for that fender? I purchased a complete front nos clip for a 70 pickup from him.

I really can't afford to lose that much on the cluster, the best I could do is $480 shipped. If you don't mind asking I will PM you a small list of NOS parts I'm looking for

kaphillips · 11-07-2013, 11:18 AM

I will have to think about the offer of 480, thanks. Yes you can pm me a SMALL list of your dream nos list.

kaphillips · 11-07-2013, 03:54 PM

Ok I am going to bite the bullet and I will take it for the 480 shipped with a new non hei tach harness. Thanks for the good deal. Pm me with payment instructions.

mahanian · 11-08-2013, 01:44 PM

Sounds good, I believe all of the new harnesses are for HEI, you will have to cut off the HEI clip and crimp on a spade to install it on a ignition coil. Let me know if that works for you and I'll PM you the payment info

kaphillips · 11-08-2013, 03:36 PM

That is all right on the tach harness. I will take it . Pm me for payment instructions.

mahanian · 11-10-2013, 02:13 PM

Sold!

05-19-2013, 07:24 PM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Lowered Price = $500 shipped in the CONUS Trying to sell some extra parts before I move. Up for sale is a 8 cyl tach instrument cluster with vac and 80 lb oil pressure gauge that I restored for my truck but didn't end up using. It is all original GM parts except the new bezel and a couple rubber grommets. I repainted all of the needles (they are all the same color, the camera flash made them look different), cleaned the gauge faces, stripped and repainted the inner and outer tins, lightly polished the lens and replaced the bezel. I even repainted the faded red mark in the temp gauge. I didn't reset the mileage to zero, I'm not sure how to do that besides a drill and that takes forever. I installed it in my truck and verified everything is fully functional. I hooked up a vacuum pump to the vacuum gauge to make sure it works since my truck isn't plumbed for a vacuum gauge. I will include a new tach harness with it as well. $550 shipped to your door Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS Last edited by mahanian; 09-24-2013 at 03:40 PM.

05-21-2013, 12:24 PM	#2
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,202	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure It's gorgeous, just not in the budget at this time. Here's a bump for ya! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-21-2013, 02:01 PM	#3
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Thats exactly what I want for my truck, is there any thing you still need for your may be a partial trade and cash if I have something that you need?

05-21-2013, 04:06 PM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Unless you have a NOS 1967 Camaro passenger side quarter panel I can't think of anything else I need right now __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

05-21-2013, 04:24 PM	#5
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure As a matter of fact I think no just kidding LOL I understand I will try to come up with the dough good luck on the sale in the mean time

06-29-2013, 05:09 PM	#7
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Price drop - $500 shipped, I'm losing money at that price __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

06-30-2013, 10:50 AM	#8
rjmose Registered User Join Date: Jun 2013 Location: chazy NY Posts: 8	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure 8IQAP!z

07-03-2013, 03:33 PM	#10
Beat68CST Registered User Join Date: Oct 2010 Location: Buckeye Arizona Posts: 470	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Any chance you have a diesel tach?

07-08-2013, 04:13 PM	#11
Jdbfish Account Suspended Join Date: Apr 2013 Location: Belton, tx Posts: 51	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Pm inbound Posted via Mobile Device

07-08-2013, 05:11 PM	#12
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Still available __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

09-21-2013, 05:46 PM	#13
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

09-27-2013, 06:02 PM	#14
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

11-05-2013, 03:43 PM	#15
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

11-06-2013, 04:39 PM	#16
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Would you take $450 shipped to Amarillo TX 79106, pretty please with sugar on top. Hey I am going to go pickup some truck parts from a man that has thousands of square feet of nos parts to include sheet metal in 3-4 weeks. He is into Camaros and Chevelles I bet he has your nos 67 passenger fender, I will ask him. What would be a fair price for that fender? I purchased a complete front nos clip for a 70 pickup from him.

11-07-2013, 11:18 AM	#18
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure I will have to think about the offer of 480, thanks. Yes you can pm me a SMALL list of your dream nos list.



Register or Log In To remove these advertisements.

11-07-2013, 03:54 PM	#19
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Ok I am going to bite the bullet and I will take it for the 480 shipped with a new non hei tach harness. Thanks for the good deal. Pm me with payment instructions.

11-08-2013, 01:44 PM	#20
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Sounds good, I believe all of the new harnesses are for HEI, you will have to cut off the HEI clip and crimp on a spade to install it on a ignition coil. Let me know if that works for you and I'll PM you the payment info __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

11-08-2013, 03:36 PM	#21
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure That is all right on the tach harness. I will take it . Pm me for payment instructions.

11-10-2013, 02:13 PM	#22
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure Sold! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

Register or Log In To remove these advertisements.