GA Parting 72 Blazer Frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**uncle** · 09-10-2013, 08:46 PM

Frame is rusty in rear. Most body mounts good. Has engine and t-case x-mem. I'm not much on 4wd trucks so I will price few things and y'all can ask about anything else. Extra front/rear are 308. Got dark so will get ratio on rolling front/rear. No brakes on roller either. Power steering pump 55 plus ship,power steering box 60 plus ship, speedo cable 30 shipped, auto frame linkage piece only 20 shipped. Wheel are not blazer. Respond in post.
Posted via Mobile Device

**uncle** · 09-10-2013, 08:48 PM

2
Posted via Mobile Device

**uncle** · 09-10-2013, 08:49 PM

3
Posted via Mobile Device

**uncle** · 09-10-2013, 08:49 PM

4
Posted via Mobile Device

**uncle** · 09-10-2013, 08:50 PM

5
Posted via Mobile Device

**uncle** · 09-11-2013, 04:54 PM

Didn't believe guy when he told me but checked front/rear today on roller and gears are 5:37. Good for swamper or rock crawler I guess.
Posted via Mobile Device

1972K20 · 09-11-2013, 11:33 PM

Look at the part circled in the pic. Does that support the transfer case and will it fit on a K20? Thanks

**DeadheadNM** · 09-12-2013, 12:09 AM

Good luck with the sales - the 4wd specific exhaust hanger on this frame would find good use on a build for someone adding dual exhaust - there are matching frame holes on the opposite side. Imparts a more stock (and symmetric) appearance to a dual exhaust setup IMO. I went this route on my K20 build.

**DeadheadNM** · 09-12-2013, 12:15 AM

How much shipped to 87110 for the:
1) frame bracket w bolt/nut for the pwr steering lines
2) the non-pressure metal pwr steering line
3) blue front hub dials if present, available, and in good shape

Wants not needs. Thanks! Pete

**uncle** · 09-12-2013, 08:05 AM

1972K20 I can't answer that. Deadheadnm 5 for ps part shipped not going to take line of pump and only has one side on hub dial and its shot.
Posted via Mobile Device

**DeadheadNM** · 09-12-2013, 08:58 AM

Quote:

Originally Posted by uncle

1972K20 I can't answer that. Deadheadnm 5 for ps part shipped not going to take line of pump and only has one side on hub dial and its shot.
Posted via Mobile Device

That NP205 support circled above will work for a K20 IMO - if I needed one I would buy it for my K20

I'll take that frame bracket w bolt and nut that secures the pwr steer lines. PM payment details when poss. Thanks, Pete

**uncle** · 09-12-2013, 10:43 AM

Deadheadnm pm sent
Posted via Mobile Device

Jdubs71 · 09-12-2013, 11:22 PM

Price on the two supports attached to the transfer case x member and the circled red part if 1972k20 passes
Posted via Mobile Device

**DeadheadNM** · 09-12-2013, 11:42 PM

FYI: The tranny x-member on this frame can be used to install an OEM NP205 skid plate - just need to cut the rivets off holding the bracket attachments for the upper frame and you have the correct piece...good luck with the sales

**cst204x4** · 09-13-2013, 12:05 AM

Interested in 4x4 speedo cable can you post pics
Posted via Mobile Device

blazerboy72 · 09-13-2013, 09:26 AM

Is the frame repairable or too rusted?
Posted via Mobile Device

**uncle** · 09-13-2013, 08:23 PM

Cable
Posted via Mobile Device

**uncle** · 09-13-2013, 08:25 PM

Frame
Posted via Mobile Device

**uncle** · 09-13-2013, 08:27 PM

2
Posted via Mobile Device

**uncle** · 09-13-2013, 08:29 PM

3
Posted via Mobile Device

**uncle** · 09-13-2013, 08:18 PM

Jdubs71 35 shipped.cst204x4 after 2nd look cable has bad place on it. (Pic).blazerboy72 here's some pics.
Posted via Mobile Device

1972K20 · 09-13-2013, 09:06 PM

uncle, can you get me a price on the transfer case support bracket shipped to 36830. Thanks

**uncle** · 09-13-2013, 09:28 PM

30 shipped
Posted via Mobile Device

**cst204x4** · 09-14-2013, 07:37 AM

Ok thanks for looking
Posted via Mobile Device

Jdubs71 · 09-16-2013, 12:17 AM

Can you post a couple close up pics of the transfer case cross member?
Thanks
Posted via Mobile Device

09-10-2013, 08:46 PM	#1
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Parting 72 Blazer Frame Frame is rusty in rear. Most body mounts good. Has engine and t-case x-mem. I'm not much on 4wd trucks so I will price few things and y'all can ask about anything else. Extra front/rear are 308. Got dark so will get ratio on rolling front/rear. No brakes on roller either. Power steering pump 55 plus ship,power steering box 60 plus ship, speedo cable 30 shipped, auto frame linkage piece only 20 shipped. Wheel are not blazer. Respond in post. Posted via Mobile Device Attached Images

09-10-2013, 08:48 PM	#2
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame 2 Posted via Mobile Device Attached Images

09-10-2013, 08:49 PM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame 3 Posted via Mobile Device Attached Images

09-10-2013, 08:49 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame 4 Posted via Mobile Device Attached Images

09-10-2013, 08:50 PM	#5
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame 5 Posted via Mobile Device Attached Images

09-11-2013, 04:54 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame Didn't believe guy when he told me but checked front/rear today on roller and gears are 5:37. Good for swamper or rock crawler I guess. Posted via Mobile Device Attached Images

09-11-2013, 11:33 PM	#7
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Parting 72 Blazer Frame Look at the part circled in the pic. Does that support the transfer case and will it fit on a K20? Thanks Attached Images

09-12-2013, 12:09 AM	#8
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Parting 72 Blazer Frame Good luck with the sales - the 4wd specific exhaust hanger on this frame would find good use on a build for someone adding dual exhaust - there are matching frame holes on the opposite side. Imparts a more stock (and symmetric) appearance to a dual exhaust setup IMO. I went this route on my K20 build. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-12-2013, 12:15 AM	#9
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Parting 72 Blazer Frame How much shipped to 87110 for the: 1) frame bracket w bolt/nut for the pwr steering lines 2) the non-pressure metal pwr steering line 3) blue front hub dials if present, available, and in good shape Wants not needs. Thanks! Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-12-2013, 08:05 AM	#10
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame 1972K20 I can't answer that. Deadheadnm 5 for ps part shipped not going to take line of pump and only has one side on hub dial and its shot. Posted via Mobile Device

09-12-2013, 10:43 AM	#12
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame Deadheadnm pm sent Posted via Mobile Device

09-12-2013, 11:22 PM	#13
Jdubs71 Registered User Join Date: May 2012 Location: Sanger, CA Posts: 415	Re: Parting 72 Blazer Frame Price on the two supports attached to the transfer case x member and the circled red part if 1972k20 passes Posted via Mobile Device __________________ 71 K5, AC/Tilt, 4" lift 33" tires 5.3L/4L60E/NP 205 (Under Construction) 05 Dodge 2500 4x4 5.9 Cummins (Daily driver) "Common sense is not so common" My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=555879

09-12-2013, 11:42 PM	#14
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Parting 72 Blazer Frame FYI: The tranny x-member on this frame can be used to install an OEM NP205 skid plate - just need to cut the rivets off holding the bracket attachments for the upper frame and you have the correct piece...good luck with the sales __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-13-2013, 12:05 AM	#15
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,006	Re: Parting 72 Blazer Frame Interested in 4x4 speedo cable can you post pics Posted via Mobile Device __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

09-13-2013, 09:26 AM	#16
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: Parting 72 Blazer Frame Is the frame repairable or too rusted? Posted via Mobile Device



Register or Log In To remove these advertisements.

09-13-2013, 08:23 PM	#17
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame Cable Posted via Mobile Device Attached Images

09-13-2013, 08:25 PM	#18
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame Frame Posted via Mobile Device Attached Images

09-13-2013, 08:27 PM	#19
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame 2 Posted via Mobile Device Attached Images

09-13-2013, 08:29 PM	#20
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame 3 Posted via Mobile Device Attached Images

09-13-2013, 08:18 PM	#21
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame Jdubs71 35 shipped.cst204x4 after 2nd look cable has bad place on it. (Pic).blazerboy72 here's some pics. Posted via Mobile Device

09-13-2013, 09:06 PM	#22
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Parting 72 Blazer Frame uncle, can you get me a price on the transfer case support bracket shipped to 36830. Thanks

09-13-2013, 09:28 PM	#23
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting 72 Blazer Frame 30 shipped Posted via Mobile Device

09-14-2013, 07:37 AM	#24
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,006	Re: Parting 72 Blazer Frame Ok thanks for looking Posted via Mobile Device __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

09-16-2013, 12:17 AM	#25
Jdubs71 Registered User Join Date: May 2012 Location: Sanger, CA Posts: 415	Re: Parting 72 Blazer Frame Can you post a couple close up pics of the transfer case cross member? Thanks Posted via Mobile Device __________________ 71 K5, AC/Tilt, 4" lift 33" tires 5.3L/4L60E/NP 205 (Under Construction) 05 Dodge 2500 4x4 5.9 Cummins (Daily driver) "Common sense is not so common" My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=555879

Register or Log In To remove these advertisements.