572 Install Questions

[deestrong71]

I have searched quite a bit and cant come up with the answers. So I pose my questions to the Forum Guru's:

I am installing a 572 BBC in my '71. I am having a hard time finding a set of headers for it,

I am needing at least 2" primary's that will bolt up to a Exhaust port that is D Shaped, all while fitting in my truck.

I do have Power Steering, A/C and a TCI 400 Super Street fighter Auto Tranny.

I do have a price quote submitted to Kooks for custom headers, but I am hoping there is something that meets my specs out there.

[Fitz]

Originally Posted by deestrong71

I have searched quite a bit and cant come up with the answers. So I pose my questions to the Forum Guru's:

I am installing a 572 BBC in my '71. I am having a hard time finding a set of headers for it,

I am needing at least 2" primary's that will bolt up to a Exhaust port that is D Shaped, all while fitting in my truck.

I do have Power Steering, A/C and a TCI 400 Super Street fighter Auto Tranny.

I do have a price quote submitted to Kooks for custom headers, but I am hoping there is something that meets my specs out there.

Call Sanderson Headers. They have a set of Gen 6 big block headers that Stacey David had made just for the 572 installed in a 67 Chevy Pickup for the Trucks TV show when he was host. They fit perfectly in my 67 stepside.

If you want to know what that monster motor will sound like when you are done go here:

http://s851.photobucket.com/user/BWF...out-1.mp4.html

[marvgarr68]

All I know is that is awesome love the look. I always wanted to do a 572 swap but out of my budget looks great.
Posted via Mobile Device

[WIDESIDE72]

Originally Posted by marvgarr68

All I know is that is awesome love the look. I always wanted to do a 572 swap but out of my budget looks great.
Posted via Mobile Device

http://www.ebay.com/itm/Big-Block-Ch...tr#ht_23wt_919

A set of these on my 468 would be much more affordable!

[deestrong71]

Originally Posted by WIDESIDE72

http://www.ebay.com/itm/Big-Block-Ch...tr#ht_23wt_919

A set of these on my 468 would be much more affordable!

If you can get them for 200, that would be a good price !

[67ctener]

I used Sanderson bb8s on my 402 and have nothing but good things to say about them
Posted via Mobile Device

[deestrong71]

That looks awesome, I just ordered the Sanderson BB8 for my 572 ! Whoop Whoop !

[WIDESIDE72]

Are you using big block stands?
Posted via Mobile Device

[deestrong71]

havent used anything yet, My Motor hasnt shipped yet.

[WIDESIDE72]

Originally Posted by deestrong71

havent used anything yet, My Motor hasnt shipped yet.

In order to get the most clearance possible, you need to use big block stands and mounts. You have three choices for them.

1. 68-71 non captured type towers/ mounts. The replacement "biscuits" for these are sort of expensive. Some folks have modified small block biscuits.

2. 72 only towers that use a modern captured mount. These are a pittle more expensive initially since they are a one tear only part, but the replacement mounts are cheaper.

3. 73+ frame brackets. These visually look different but are usually cheaper all around. You will have to drill a few holes with these.
Posted via Mobile Device

[ItsRandy]

I have Hookers on mine, P/N 2841. They have 2" primaries with a 3.5" collector. I got mine through Summit. Ceramic coated I think they were $769.

They fit pretty good but not without some issues that were easy to fix/fit. The head bolts hit on the flanges, nothing an angle grinder couldn't fix and the driver's side lower control arm "kissed" one of the primary tubes. Again, an angle grinder fixed this also. They hang a little low but I have only "touched" them on a driveway (high center) a couple of times.

[ItsRandy]

Another picture.

[deestrong71]

Originally Posted by ItsRandy

Another picture.

Your Setup Looks Great !

[deestrong71]

Originally Posted by WIDESIDE72

In order to get the most clearance possible, you need to use big block stands and mounts. You have three choices for them.

1. 68-71 non captured type towers/ mounts. The replacement "biscuits" for these are sort of expensive. Some folks have modified small block biscuits.

2. 72 only towers that use a modern captured mount. These are a pittle more expensive initially since they are a one tear only part, but the replacement mounts are cheaper.

3. 73+ frame brackets. These visually look different but are usually cheaper all around. You will have to drill a few holes with these.
Posted via Mobile Device

I have a 454 installed in it now. I dont know what Motor Mounts it has as I didn't do the Install. but I got 2" room on each side of the header.

[skorpioskorpio]

Randy, Is that a Ron Davis Radiator?

[ItsRandy]

Originally Posted by skorpioskorpio

Randy, Is that a Ron Davis Radiator?

It's an Entropy radiator. http://www.entropyrad.com/ I bought it with 14" fans but after installation it was determined the 14" fans were inadequate. A 16" fan set with shroud was fabricated and Entropy just swapped them, I may have had to pay shipping.

[deestrong71]

Fitz you dont know what kind of Motor Mounts you used in your 572 install do you ?

[Fitz]

Originally Posted by deestrong71

Fitz you dont know what kind of Motor Mounts you used in your 572 install do you ?

Yes, I do. They were Energy Suspension Part Number: 71907

[deestrong71]

Starting the Upgrade on the Fuel system.

Tank Out, Holley Electric pump mounted, Fuel regulator mounted and fuel lines
upgraded to AN lines.