OK Parting out 72 blazer chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MoreLoveThanMoney · 02-09-2014, 04:26 PM

Decided to part out my 72 Frame I have. Its a complete 4x4 with fuel tank, filler neck, tank straps, driveshafts, 12 bolt rear axle, all the springs and hangers, cross members, all the brackets, rust free and straight frame. Let me know what you need. Willing to ship the shippable parts with a payment through paypal. It will take me a few days to strip any of the parts so please be patient. We all know that cutting and popping rivets is no fun and time consuming so be patient with me. I will sell complete but I am keeping the front axle. I could swap in a 10 bolt front if needed. Let me know what you need and I will help as best I can.

Dirt's72 · 02-09-2014, 05:05 PM

I'm looking for a metal gas tank if in good condition, price on straps. Also does it have a skid plate cover?

MoreLoveThanMoney · 02-09-2014, 07:19 PM

Pics
Sorry for the snow!

MoreLoveThanMoney · 02-09-2014, 07:21 PM

Pics

MoreLoveThanMoney · 02-09-2014, 07:23 PM

Pic

**JimH2828** · 02-09-2014, 08:02 PM

I'm interested in:

1) Upper radiator to engine pipe
2) Pitman arm with bolt\nut
3) Exhaust manifolds
4) Transmission dip stick and tube (should be 34" long)
5) Transmission vacuum modulator hard line
6) Any other vacuum hard lines?

Can you post a couple of pics of the carburetor area showing top of engine.

Thanks
Jim

tristan · 02-09-2014, 08:14 PM

I'm interested in the complete fuel filler assembly down to the tank if it is shippable. Please let me know via PM what you'd need for it shipped to 15205.

MoreLoveThanMoney · 02-09-2014, 08:21 PM

Quote:

Originally Posted by tristan

I'm interested in the complete fuel filler assembly down to the tank if it is shippable. Please let me know via PM what you'd need for it shipped to 15205.

Its shippable for sure. Ill PM a price

warbucket · 02-09-2014, 08:29 PM

I'm interested in the two rear bumper brackets and the transfer case skid plate, I don't need the crossmember.

MoreLoveThanMoney · 02-25-2014, 04:09 PM

Quote:

Originally Posted by warbucket

I'm interested in the two rear bumper brackets and the transfer case skid plate, I don't need the crossmember.

I can do the skid plate if you are interested

Jake1971 · 02-22-2014, 11:22 AM

Quote:

Originally Posted by tristan

I'm interested in the complete fuel filler assembly down to the tank if it is shippable. Please let me know via PM what you'd need for it shipped to 15205.

Awhile back you offered a filler neck in response to my thread titled WTB '71/72 Blazer Fuel Filler Neck http://67-72chevytrucks.com/vboard/s...d.php?t=615805 Is this filler neck still available? also interesed in the mounting hardware and cover from inside the bed.

MoreLoveThanMoney · 02-09-2014, 08:17 PM

Quote:

Originally Posted by JimH2828

I'm interested in:

1) Upper radiator to engine pipe
2) Pitman arm with bolt\nut
3) Exhaust manifolds
4) Transmission dip stick and tube (should be 34" long)
5) Transmission vacuum modulator hard line
6) Any other vacuum hard lines?

Can you post a couple of pics of the carburetor area showing top of engine.

Thanks
Jim

I know I could do the manifolds and pitman arm. As far as the rest goes, the motor and trans was swapped at one time. I know that the dip stick is not correct and I would have to look to see about the vacuum lines. The engine is already committed to.

**DeadheadNM** · 02-09-2014, 10:32 PM

Is the OEM tie rod bracket for the steering dampner there? I'll get in line for the t-case skid plate. Thanks

**29od1** · 02-09-2014, 11:30 PM

How much for the bare rolling chassis with swapped out 10 bolt front?

MoreLoveThanMoney · 02-10-2014, 12:14 AM

Quote:

Originally Posted by 29od1

How much for the bare rolling chassis with swapped out 10 bolt front?

Sent you a PM. Want to verify exactly what you're looking for.

MoreLoveThanMoney · 02-25-2014, 04:10 PM

Quote:

Originally Posted by DeadheadNM

Is the OEM tie rod bracket for the steering dampner there? I'll get in line for the t-case skid plate. Thanks

I looked and I honestly don't know if its the factory bracket or not. I could send you a photo.

**DeadheadNM** · 02-25-2014, 08:35 PM

Quote:

Originally Posted by MoreLoveThanMoney

I looked and I honestly don't know if its the factory bracket or not. I could send you a photo.

Thanks for the follow-up. I'll pass on the bracket but keep me in line for the t-case plate. Pete

warbucket · 02-25-2014, 08:52 PM

Still interested in the rear bumper brackets if you still have but I'll pass the transfer case skip to DeadheadNM, He is next up.

**DeadheadNM** · 02-28-2014, 12:14 PM

Quote:

Originally Posted by warbucket

Still interested in the rear bumper brackets if you still have but I'll pass the transfer case skip to DeadheadNM, He is next up.

Was awaiting cost of the skid plate? Shipped to 59901...

Dirt's72 · 02-26-2014, 09:34 AM

Don't know if you missed post#2??
Keep me in mind if you don't sell it locally.

MoreLoveThanMoney · 02-28-2014, 12:09 PM

Quote:

Originally Posted by Dirt's72

Don't know if you missed post#2??
Keep me in mind if you don't sell it locally.

I sure did miss it. Sorry. Youre interested in the skid plate and the tank. Tank is already sold but I will PM you about the skid

**JimH2828** · 02-09-2014, 11:29 PM

Quote:

I know I could do the manifolds and pitman arm. As far as the rest goes, the motor and trans was swapped at one time. I know that the dip stick is not correct and I would have to look to see about the vacuum lines. The engine is already committed to.

OK, PM me which items in my list are for sale, prices?

Thanks
Jim

MoreLoveThanMoney · 02-10-2014, 12:17 AM

Quote:

Originally Posted by JimH2828

OK, PM me which items in my list are for sale, prices?

Thanks
Jim

PM sent

kevmac · 02-21-2014, 04:00 AM

do you still have a front drive shaft??

MoreLoveThanMoney · 02-28-2014, 12:10 PM

Quote:

Originally Posted by kevmac

do you still have a front drive shaft??

I do have both driveshafts still. Let me know if interested in the front

02-09-2014, 04:26 PM	#1
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Parting out 72 blazer chassis Decided to part out my 72 Frame I have. Its a complete 4x4 with fuel tank, filler neck, tank straps, driveshafts, 12 bolt rear axle, all the springs and hangers, cross members, all the brackets, rust free and straight frame. Let me know what you need. Willing to ship the shippable parts with a payment through paypal. It will take me a few days to strip any of the parts so please be patient. We all know that cutting and popping rivets is no fun and time consuming so be patient with me. I will sell complete but I am keeping the front axle. I could swap in a 10 bolt front if needed. Let me know what you need and I will help as best I can.

02-09-2014, 07:19 PM	#3
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: Parting out 72 blazer chassis Pics Sorry for the snow! Attached Images

02-09-2014, 07:21 PM	#4
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: Parting out 72 blazer chassis Pics Attached Images

02-09-2014, 07:23 PM	#5
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: Parting out 72 blazer chassis Pic Attached Images

02-09-2014, 08:02 PM	#6
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: Parting out 72 blazer chassis I'm interested in: 1) Upper radiator to engine pipe 2) Pitman arm with bolt\nut 3) Exhaust manifolds 4) Transmission dip stick and tube (should be 34" long) 5) Transmission vacuum modulator hard line 6) Any other vacuum hard lines? Can you post a couple of pics of the carburetor area showing top of engine. Thanks Jim

02-09-2014, 05:05 PM	#2
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Parting out 72 blazer chassis I'm looking for a metal gas tank if in good condition, price on straps. Also does it have a skid plate cover?

02-09-2014, 08:14 PM	#7
tristan Registered User Join Date: Sep 2013 Location: Western PA Posts: 1,295	Re: Parting out 72 blazer chassis I'm interested in the complete fuel filler assembly down to the tank if it is shippable. Please let me know via PM what you'd need for it shipped to 15205.

02-09-2014, 08:29 PM	#9
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: Parting out 72 blazer chassis I'm interested in the two rear bumper brackets and the transfer case skid plate, I don't need the crossmember.

02-09-2014, 10:32 PM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,453	Re: Parting out 72 blazer chassis Is the OEM tie rod bracket for the steering dampner there? I'll get in line for the t-case skid plate. Thanks __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-09-2014, 11:30 PM	#14
29od1 Registered User Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Parting out 72 blazer chassis How much for the bare rolling chassis with swapped out 10 bolt front?

02-25-2014, 08:52 PM	#18
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: Parting out 72 blazer chassis Still interested in the rear bumper brackets if you still have but I'll pass the transfer case skip to DeadheadNM, He is next up. __________________ 72 CST 4x4 Blazer, 1 ton 70 SS Chevelle, L78, 396 Everytime someone calls your Blazer a Bronco, God kills a kitten.

02-26-2014, 09:34 AM	#20
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Parting out 72 blazer chassis Don't know if you missed post#2?? Keep me in mind if you don't sell it locally.

02-21-2014, 04:00 AM	#24
kevmac Registered User Join Date: Jun 2012 Location: ft worth tx Posts: 135	Re: Parting out 72 blazer chassis do you still have a front drive shaft??



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.