will Ford alcoa dually wheels work on a k30?

[cochino12]

So I've been searching all morning and cant seem to find exactly what I'm looking for here. I've got a chance to pick up some free Alcoa dually wheels that were pulled from a mid 90 ford dually. From what I understand the fords use a slightly larger hub so factory steel wheels wont work on a chevy but what about the aluminum Alcoa's? Anybody tried them?

[rs74]

I want to say 97 and older will bolt up although I believe the hub whole may need opened up. I am not 100% on that but that is what comes to mind.

[b454rat]

they will fit. Ford used a bigger hub, therefor the wheel opening will be larger. Now Gm wheels are the opposite, so they won't fit on a Ford.

[80SPORT]

The center of the ford rim is larger so you will need to machine a sleeve to center on the Chev hub;they will bolt on without the sleeve but will not run true.

[rs74]

Originally Posted by b454rat

they will fit. Ford used a bigger hub, therefor the wheel opening will be larger. Now Gm wheels are the opposite, so they won't fit on a Ford.

Originally Posted by 80SPORT

The center of the ford rim is larger so you will need to machine a sleeve to center on the Chev hub;they will bolt on without the sleeve but will not run true.

I am glad you guys straightened that out. I couldn't remember which way it went.

80SPORT, do you have any pics or links of a sleeve being made for this application? I would like to see a pic of this if possible.

[cochino12]

Originally Posted by 80SPORT

The center of the ford rim is larger so you will need to machine a sleeve to center on the Chev hub;they will bolt on without the sleeve but will not run true.

That's what I thought, but how is it that an eagle dually wheel will fit both a ford and chevy without a sleeve for the hub?

[Tx Firefighter]

Originally Posted by cochino12

That's what I thought, but how is it that an eagle dually wheel will fit both a ford and chevy without a sleeve for the hub?

All of the Eagles I've seen use the self centering Mag type of shouldered lug nuts. They rely on the lugnut and stud to carry the load rather than the hub centric.

[cochino12]

Originally Posted by Tx Firefighter

All of the Eagles I've seen use the self centering Mag type of shouldered lug nuts. They rely on the lugnut and stud to carry the load rather than the hub centric.

Do you know if the Alcoa wheels will work with that style lug nut?

thanks for the help guys

[Tx Firefighter]

Originally Posted by cochino12

Do you know if the Alcoa wheels will work with that style lug nut?

thanks for the help guys

Absolutely not. The Alcoas have small lug holes, just big enough for the studs, but not big enough for the shouldered lugnuts. I guess you could easily drill the lug holes bigger though.

[nekkidhillbilly]

Originally Posted by 80SPORT

The center of the ford rim is larger so you will need to machine a sleeve to center on the Chev hub;they will bolt on without the sleeve but will not run true.

you can by centric rings

[cochino12]

I've been looking online for some rings an found a few sources, now I just need a caliper big enough to measure the hub and wheel centers haha

[plumbers crack]

cochino12, you can take one of each wheel to a machine shop and have them make you a set.

[80SPORT]

I think you ned the HR125-116 rings

About 12.00 each

But measure first before ordering.

(wheel center 124.9 mm....hub od 116.7 mm)

[cochino12]

You guys are awesome, I appreciate the help.

80sport, those numbers look right on. Thanks