MO 2 truck tilts, one original, one re-done - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1nova71 · 04-04-2014, 04:36 PM

I'm trying to raise some cash for my Blazer build, so I'm selling these two tilts. The first one is straight out of a truck. I've had it for years and was keeping it for a future project, but I have gotten several others so some can go. It's really tight and the shifter pin hole is nice. It looks to have been painted a long time ago, but could use a freshening up. The shift lever chrome is worn off in an odd spot, and it could also probably use to be lubed, as it doesn't snap up fast when the release lever is pulled, it does go up all the way, just a little slow as if it's a touch dry inside. The shaft spins nice and the wiring is all intact with nothing cut. I am including a new shift pointer with this column. $275 plus shipping.

ls1nova71 · 04-04-2014, 04:39 PM

More pics.

ls1nova71 · 04-04-2014, 04:47 PM

The next one is the nice one. This tilt has been completely disassembled cleaned up, painted all bearings checked and lubed and reassembled. It has a new turn signal switch. The levers are nice originals. It has a short shifter that most people prefer when using a smaller steering wheel. I have a long one, but the chrome is not very good on it. There is no play in this column. $425 plus shipping. I can take pictures of any part that isn't shown in these pics, just ask.

ls1nova71 · 04-04-2014, 04:49 PM

The rest of the pics.

**72ironmike** · 04-05-2014, 06:50 PM

Quote:

Originally Posted by ls1nova71

The next one is the nice one. This tilt has been completely disassembled cleaned up, painted all bearings checked and lubed and reassembled. It has a new turn signal switch. The levers are nice originals. It has a short shifter that most people prefer when using a smaller steering wheel. I have a long one, but the chrome is not very good on it. There is no play in this column. $425 plus shipping. I can take pictures of any part that isn't shown in these pics, just ask.

Rick, How many of these have you done ? I'd bet you could do it blindfolded !

*bowties11* · 04-04-2014, 04:56 PM

Would you consider 250.00 for the one that needs restored thanks

**396ci** · 04-04-2014, 05:54 PM

I would like to know what you would sell both for? Shipping to Modesto Ca 95356. Thanks.

myyamr7 · 04-04-2014, 06:38 PM

I'll do $425 shipped to 02825 for the nice one

ls1nova71 · 04-04-2014, 09:42 PM

Quote:

Originally Posted by bowties11

Would you consider 250.00 for the one that needs restored thanks

I would do $260, if you're interested let me know and give me a zip code so I can get a shipping quote.

Quote:

Originally Posted by 396ci

I would like to know what you would sell both for? Shipping to Modesto Ca 95356. Thanks.

I could go $675 for both. Youre second in line on the unrestored one. Would have to get a shipping quote on monday.

Quote:

Originally Posted by myyamr7

I'll do $425 shipped to 02825 for the nice one

I may do that, but would need to check on shipping first. Youre second on line on it.

Thanks

ls1nova71 · 04-07-2014, 10:20 PM

Quote:

Originally Posted by myyamr7

I'll do $425 shipped to 02825 for the nice one

You're up if you're still interested. I have an idea on what shipping will be, but not exact, but if you want it I can do $435 shipped.

myyamr7 · 04-07-2014, 10:25 PM

Quote:

Originally Posted by ls1nova71

You're up if you're still interested. I have an idea on what shipping will be, but not exact, but if you want it I can do $435 shipped.

I'll take it! How do you want payment, paypal ok? Let me know, PM what you would like me to do.
Thanks

ls1nova71 · 04-07-2014, 11:00 AM

Quote:

Originally Posted by 396ci

I would like to know what you would sell both for? Shipping to Modesto Ca 95356. Thanks.

I went by the post office this morning, and well, shipping columns isn't cheap! They weigh 18lbs a piece, so shipping to 95356 would be around $52, and the less than helpful woman behind the counter said there may be a surcharge, but wasn't willing to tell me if for sure or how much.

But you're up on them both if you're still interested.

mcbassin · 04-07-2014, 11:04 AM

Quote:

Originally Posted by ls1nova71

I went by the post office this morning, and well, shipping columns isn't cheap! They weigh 18lbs a piece, so shipping to 95356 would be around $52, and the less than helpful woman behind the counter said there may be a surcharge, but wasn't willing to tell me if for sure or how much.

But you're up on them both if you're still interested.

Not sure if it would help you but UPS or FedEx is usually way cheaper than USPS on heavier items. But you need to box them up yourself don't take them to a UPS store or similar. good luck with the sale.

**396ci** · 04-07-2014, 01:41 PM

Quote:

Originally Posted by ls1nova71

I went by the post office this morning, and well, shipping columns isn't cheap! They weigh 18lbs a piece, so shipping to 95356 would be around $52, and the less than helpful woman behind the counter said there may be a surcharge, but wasn't willing to tell me if for sure or how much.

But you're up on them both if you're still interested.

Seems like a hassle. I will pass since I still dont know what the final price is. Thanks for your time.

*bowties11* · 04-05-2014, 12:40 AM

Quote:

Originally Posted by bowties11

Would you consider 250.00 for the one that needs restored thanks

thanks for the price but I have found one for 260.00 shipped but thanks though

Steve Cole · 04-05-2014, 05:09 PM

Put me in line for either one.

ls1nova71 · 04-07-2014, 10:23 PM

Quote:

Originally Posted by Steve Cole

Put me in line for either one.

You're up for the unrestored one, and I could do $285 shipped on it. Unless you want to wait and see if the restored one sells.

Steve Cole · 04-08-2014, 09:28 AM

Quote:

Originally Posted by ls1nova71

You're up for the unrestored one, and I could do $285 shipped on it. Unless you want to wait and see if the restored one sells.

OK, I'll take that one. Can you PM me your paypal address?

jjzepplin · 04-05-2014, 06:12 PM

How much for the snake in pic #3 ?

dbb1025 · 04-05-2014, 10:07 PM

Put me in line for the refurbished unit.

**72ironmike** · 04-07-2014, 06:43 AM

Here's a bump ttt

Steve Cole · 04-07-2014, 09:33 AM

Where are we with these tilts? Any updates? Thanks.

ls1nova71 · 04-07-2014, 11:07 AM

Quote:

Originally Posted by Steve Cole

Where are we with these tilts? Any updates? Thanks.

You're next in line on the unrestored one and second in line on the restored one. Waiting to see if 396ci wants them both.

Quote:

Originally Posted by jjzepplin

How much for the snake in pic #3 ?

Haha! I didn't realize that was in the pic. My hunter cat brought that home one day, she thought she really had something, and at first , so did I!

Quote:

Originally Posted by 72ironmike

Rick, How many of these have you done ? I'd bet you could do it blindfolded !

I can't count that high Mike! It's like riding a bike though, it just comes back to you when you do them.

myyamr7 · 04-07-2014, 11:22 AM

I'm still interested in the good one if 396 passes.

Thanks

Steve Cole · 04-07-2014, 01:21 PM

Will you check with Fed Ex or UPS for their rates?

04-04-2014, 04:36 PM	#1
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	2 truck tilts, one original, one re-done I'm trying to raise some cash for my Blazer build, so I'm selling these two tilts. The first one is straight out of a truck. I've had it for years and was keeping it for a future project, but I have gotten several others so some can go. It's really tight and the shifter pin hole is nice. It looks to have been painted a long time ago, but could use a freshening up. The shift lever chrome is worn off in an odd spot, and it could also probably use to be lubed, as it doesn't snap up fast when the release lever is pulled, it does go up all the way, just a little slow as if it's a touch dry inside. The shaft spins nice and the wiring is all intact with nothing cut. I am including a new shift pointer with this column. $275 plus shipping. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

04-04-2014, 04:39 PM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 2 truck tilts, one original, one re-done More pics. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

04-04-2014, 04:49 PM	#4
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 2 truck tilts, one original, one re-done The rest of the pics. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

04-04-2014, 04:56 PM	#6
bowties11 Account Suspended Join Date: May 2011 Location: jonesboro indiana Posts: 592	Re: 2 truck tilts, one original, one re-done Would you consider 250.00 for the one that needs restored thanks

04-04-2014, 05:54 PM	#7
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 805	Re: 2 truck tilts, one original, one re-done I would like to know what you would sell both for? Shipping to Modesto Ca 95356. Thanks. __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

04-04-2014, 04:47 PM	#3
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 2 truck tilts, one original, one re-done The next one is the nice one. This tilt has been completely disassembled cleaned up, painted all bearings checked and lubed and reassembled. It has a new turn signal switch. The levers are nice originals. It has a short shifter that most people prefer when using a smaller steering wheel. I have a long one, but the chrome is not very good on it. There is no play in this column. $425 plus shipping. I can take pictures of any part that isn't shown in these pics, just ask. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

04-04-2014, 06:38 PM	#8
myyamr7 Registered User Join Date: Dec 2012 Location: Providence, RI Posts: 211	Re: 2 truck tilts, one original, one re-done I'll do $425 shipped to 02825 for the nice one __________________ Mark 71 C10 Cheyenne 12 Aprilia RSV4

04-05-2014, 05:09 PM	#16
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: 2 truck tilts, one original, one re-done Put me in line for either one.

04-05-2014, 06:12 PM	#19
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: 2 truck tilts, one original, one re-done How much for the snake in pic #3 ? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

04-05-2014, 10:07 PM	#20
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 2 truck tilts, one original, one re-done Put me in line for the refurbished unit.

04-07-2014, 06:43 AM	#21
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,060	Re: 2 truck tilts, one original, one re-done Here's a bump ttt

04-07-2014, 09:33 AM	#22
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: 2 truck tilts, one original, one re-done Where are we with these tilts? Any updates? Thanks.

04-07-2014, 11:22 AM	#24
myyamr7 Registered User Join Date: Dec 2012 Location: Providence, RI Posts: 211	Re: 2 truck tilts, one original, one re-done I'm still interested in the good one if 396 passes. Thanks __________________ Mark 71 C10 Cheyenne 12 Aprilia RSV4

04-07-2014, 01:21 PM	#25
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: 2 truck tilts, one original, one re-done Will you check with Fed Ex or UPS for their rates?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.