|
|
|
08-17-2014, 10:27 PM
|
#1 |
|
Registered User
Join Date: Apr 2012
Location: san diego ca
Posts: 618
|
Head light switch
I have a 1974 gmc truck i was replacing the headight switch with a new one from LMC trucks, pressed the button on the back got the old knob out. Installed the new one, put the dash cover back on, cant get the knob to go back in the switch. Any tricks or is just a piece of crap switch.
|
|
|
|
08-17-2014, 10:32 PM
|
#2 |
|
Registered User
Join Date: Jan 2010
Location: northern arizona
Posts: 259
|
Re: Head light switch
Push the button, push the knob shaft in and release the button.
__________________
"Off the grid and on the seven day weekend plan" "One person cannot know everything, but between all of us, there isn't much we don't know." |
|
|
|
|
08-18-2014, 02:46 AM
|
#3 |
|
Registered User
Join Date: Apr 2012
Location: san diego ca
Posts: 618
|
Re: Head light switch
Did that dosent want to lock in
|
|
|
|
|
08-18-2014, 09:26 AM
|
#4 |
|
Registered User
Join Date: Jan 2010
Location: northern arizona
Posts: 259
|
Re: Head light switch
They do that sometimes, did you slide it in and out a few times, not pulling it completely out of the switch?
Dirt and dust build up and keep the latch from grabbing.
__________________
"Off the grid and on the seven day weekend plan" "One person cannot know everything, but between all of us, there isn't much we don't know." |
|
|
|
|
08-18-2014, 12:41 PM
|
#5 |
|
Registered User
Join Date: Apr 2012
Location: san diego ca
Posts: 618
|
Re: Head light switch
Ill try that and see what happens.
|
|
|
|
|
08-18-2014, 01:40 PM
|
#6 |
|
In the Forgotten far North.
 
Join Date: Jul 2007
Location: Anchorage, Alaska
Posts: 2,627
|
Re: Head light switch
I've used a small crochet hook to reach inside to pull the locking tab back up before. You can do the same thing with a large paper clip and a pair of needle nose pliers.
1. Straighten out paper clip by hand leaving the last bend at 90 degree's to use as a handle. 2. Using the pliers, bend a SHORT "J" hok at the end of the paper clip opposite the handle. 3. Reach down inside the switch to hook the lock and pull it back up to the "ON" position. note that you may need to depress the button while doing so. good luck and have fun!!!
__________________
1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade |
|
|
|
|
08-19-2014, 01:01 PM
|
#7 |
|
Registered User
Join Date: Apr 2012
Location: san diego ca
Posts: 618
|
Re: Head light switch
I ended up pulling the switch back out and taking it apart. Looks like the push button isnt hitting the sheetmetal that holds the plunger in, i plan on putting it back in the truck this afternoon and make sure it works.
|
|
|
|
|
08-19-2014, 01:44 PM
|
#8 |
|
Registered User
Join Date: Jul 2014
Location: Pacific Grove, CA
Posts: 105
|
Re: Head light switch
I've had problems with the headlight switch out of my 74 as well. I bought a new one to replace it. If it gives me problems then I plan on using a headlight switch out of a 59 Chevy truck. They're simpler and more reliable and they have tabs on them for the wiring so they should be very easy to adapt. They also attach to the dashboard the same way and should look perfectly stock without cutting or drilling anything and have the same functionality, except maybe a dimmer if the 74s had that as an option.
|
|
|
|
|
08-19-2014, 10:09 PM
|
#9 |
|
Registered User
Join Date: Apr 2012
Location: san diego ca
Posts: 618
|
Re: Head light switch
Installed it again and the plastic on the plunger feel apart so i was able to install it with the plunger already on it. Now i need to fab someting for a handle. Its it work now lol. Next one will be nos.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
