Perfect One Piece Push On Door Seals For Burbs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71meangreenc10 · 09-06-2014, 08:17 PM

Well,
I was moving through the bone yard today and noticed a door seal that looked like it would fit the burb. Got a couple sets and fit them to my burb and it was like someone was thinking about the burbs 30 years later. These fit perfect with the corner of the doors and you do not have to cut them at all. They fit the whole frame to a tee......I should be able to cut set and make them fit the third door with no problem......

Lets see how much interest before I let the cat out of the bag......

Smitty

magicoolbus · 09-06-2014, 08:44 PM

Sounds to me like you are trying to drum up interest to make a sale. Mods will drop the hammer, use caution.

71meangreenc10 · 09-06-2014, 08:48 PM

I have been on here too long for that......The only sale will be folks going to the junk yards....

Smitty

**Bgrdmoose** · 09-06-2014, 10:51 PM

I wanna know, tell me!!!

71meangreenc10 · 09-06-2014, 10:57 PM

99 Chrysler Town and Country Minivan. I will check the year again in the next couple of days.

Fits like a glove........

Smitty

jeffg1010 · 02-11-2015, 04:00 PM

Quote:

Originally Posted by 71meangreenc10

99 Chrysler Town and Country Minivan. I will check the year again in the next couple of days.

Fits like a glove........

Smitty

WHAT?! That is awesome info! And those are plentiful in junkyards across the country.

**LockDoc** · 02-11-2015, 05:10 PM

Quote:

Originally Posted by jeffg1010

WHAT?! That is awesome info! And those are plentiful in junkyards across the country.

You have to check them really close before you pull them. Like Webb mentioned, a lot of the drivers side ones are torn on the latch side and/or the bottom and you can't see it unless you put your fingers under the outside edge and pull out on it. Out of the 6 or 7 I checked the last time I was at the bone yard I only got one good one and it was for the passengers side.

LockDoc

71meangreenc10 · 02-15-2015, 06:47 PM

Quote:

Originally Posted by LockDoc

You have to check them really close before you pull them. Like Webb mentioned, a lot of the drivers side ones are torn on the latch side and/or the bottom and you can't see it unless you put your fingers under the outside edge and pull out on it. Out of the 6 or 7 I checked the last time I was at the bone yard I only got one good one and it was for the passengers side.

LockDoc

True,

I got lucky I guess, had about four of them and two sets were GTG....

Smitty

**Bgrdmoose** · 09-06-2014, 11:06 PM

:-) thanks!

71meangreenc10 · 09-06-2014, 11:13 PM

Quote:

Originally Posted by Bgrdmoose

:-) thanks!

No problem....

Smitty

Average Joe · 09-07-2014, 02:12 AM

Good info! Thanks for sharing.

**Bgrdmoose** · 09-23-2014, 12:12 PM

Found a set yesterday, $32. Fit like a glove. Took me less then 10min. to change them out. Time for a water test. Thanks for the tip!

highwinger · 09-23-2014, 04:08 PM

I would like to give them a try too, thanks

pwdcougar · 09-24-2014, 08:41 AM

Sounds great! Got a picture of them installed?

Paul

71meangreenc10 · 09-24-2014, 05:06 PM

Quote:

Originally Posted by Bgrdmoose

Found a set yesterday, $32. Fit like a glove. Took me less then 10min. to change them out. Time for a water test. Thanks for the tip!

It was a good find.....No need to keep a good thing to myself

Quote:

Originally Posted by pwdcougar

Sounds great! Got a picture of them installed?

Paul

I will get you one.

Smitty

Street Smart · 10-06-2014, 09:57 PM

Any pics? How do the doors close with the seals installed?

71meangreenc10 · 10-06-2014, 10:11 PM

Quote:

Originally Posted by Street Smart

Any pics? How do the doors close with the seals installed?

Doors shut great. Will post pics tomorrow. Seals fit the outline of the door like a glove.

Smitty

Average Joe · 10-07-2014, 12:54 AM

I went to the local pick-n-pull today to try a set but every one was hashed. They do look like they would be a great fit though. Looks like plymouth voyagers of that era would also work as well as caravans.

highwinger · 10-07-2014, 08:18 AM

They pass water test yet?

6erWebb · 10-08-2014, 07:49 AM

Im about to grab some today as well, wheres the pics y'all!

This is why I love this forum.

olblue60@aol.com · 10-08-2014, 05:33 PM

Wasn't there an old thread that old Chevy S-10 was the same type of a clip on gasket that fit as well?

highwinger · 10-08-2014, 06:02 PM

Quote:

Originally Posted by olblue60@aol.com

Wasn't there an old thread that old Chevy S-10 was the same type of a clip on gasket that fit as well?

Yes, that was my thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=632092

I have the S10 on my driver door but I'm looking for something better. The miters (self cut & glued) aren't too good. The mfg is working on a creating a press on for the burb but not expected til the end of year last I heard.

**Bgrdmoose** · 10-08-2014, 09:33 PM

So far so good. It rained in seattle last week & I didn't have any leaks but it wasn't a hard rain. I'll report back after I take it thru an automated car wash.

4shongo · 10-09-2014, 09:04 AM

Can someone post up some pics of the gasket? Maybe a short video of the install? I am very interested in this....like a lot of people I would imagine. Thanks guys!

Bigdav160 · 10-09-2014, 10:09 AM

Yes, in the truck forum some claimed Dodge Dakota seals were an excellent fit. I tried it and gave up. They bent my window frame and wouldn't allow the door to close.

09-06-2014, 08:17 PM	#1
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Perfect One Piece Push On Door Seals For Burbs Well, I was moving through the bone yard today and noticed a door seal that looked like it would fit the burb. Got a couple sets and fit them to my burb and it was like someone was thinking about the burbs 30 years later. These fit perfect with the corner of the doors and you do not have to cut them at all. They fit the whole frame to a tee......I should be able to cut set and make them fit the third door with no problem...... Lets see how much interest before I let the cat out of the bag...... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

09-06-2014, 08:44 PM	#2
magicoolbus Registered User Join Date: Jul 2010 Location: Mesa, AZ Posts: 513	Re: Perfect One Piece Push On Door Seals For Burbs Sounds to me like you are trying to drum up interest to make a sale. Mods will drop the hammer, use caution. __________________ JB from AZ 1969 Chevy Sub K10 1957 Chevy 3200 1962 VW Beetle 1957 Willys CJ5

09-06-2014, 08:48 PM	#3
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Perfect One Piece Push On Door Seals For Burbs I have been on here too long for that......The only sale will be folks going to the junk yards.... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

09-06-2014, 10:51 PM	#4
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Perfect One Piece Push On Door Seals For Burbs I wanna know, tell me!!!

09-06-2014, 10:57 PM	#5
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Perfect One Piece Push On Door Seals For Burbs 99 Chrysler Town and Country Minivan. I will check the year again in the next couple of days. Fits like a glove........ Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

09-06-2014, 11:06 PM	#9
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Perfect One Piece Push On Door Seals For Burbs :-) thanks!

09-07-2014, 02:12 AM	#11
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: Perfect One Piece Push On Door Seals For Burbs Good info! Thanks for sharing. __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

09-23-2014, 12:12 PM	#12
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Perfect One Piece Push On Door Seals For Burbs Found a set yesterday, $32. Fit like a glove. Took me less then 10min. to change them out. Time for a water test. Thanks for the tip!

09-23-2014, 04:08 PM	#13
highwinger Registered User Join Date: May 2014 Location: Melbourne, FL Posts: 297	Re: Perfect One Piece Push On Door Seals For Burbs I would like to give them a try too, thanks

09-24-2014, 08:41 AM	#14
pwdcougar Registered User Join Date: Oct 2013 Location: New Jersey Posts: 1,307	Re: Perfect One Piece Push On Door Seals For Burbs Sounds great! Got a picture of them installed? Paul __________________ "You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those" 1969 Mercury Cougar Standard 4 speed 1969 Mercury Cougar XR7 convertible 1970 4WD Chevrolet Suburban 1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)

10-06-2014, 09:57 PM	#16
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Perfect One Piece Push On Door Seals For Burbs Any pics? How do the doors close with the seals installed? __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

10-07-2014, 12:54 AM	#18
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: Perfect One Piece Push On Door Seals For Burbs I went to the local pick-n-pull today to try a set but every one was hashed. They do look like they would be a great fit though. Looks like plymouth voyagers of that era would also work as well as caravans. __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

10-07-2014, 08:18 AM	#19
highwinger Registered User Join Date: May 2014 Location: Melbourne, FL Posts: 297	Re: Perfect One Piece Push On Door Seals For Burbs They pass water test yet?

10-08-2014, 07:49 AM	#20
6erWebb Registered User Join Date: Sep 2009 Location: franklin, TN Posts: 80	Re: Perfect One Piece Push On Door Seals For Burbs Im about to grab some today as well, wheres the pics y'all! This is why I love this forum.

10-08-2014, 05:33 PM	#21
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Perfect One Piece Push On Door Seals For Burbs Wasn't there an old thread that old Chevy S-10 was the same type of a clip on gasket that fit as well? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide



Register or Log In To remove these advertisements.

10-08-2014, 09:33 PM	#23
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Perfect One Piece Push On Door Seals For Burbs So far so good. It rained in seattle last week & I didn't have any leaks but it wasn't a hard rain. I'll report back after I take it thru an automated car wash.

10-09-2014, 09:04 AM	#24
4shongo Registered User Join Date: Sep 2012 Location: Arlington, TN Posts: 315	Re: Perfect One Piece Push On Door Seals For Burbs Can someone post up some pics of the gasket? Maybe a short video of the install? I am very interested in this....like a lot of people I would imagine. Thanks guys!

10-09-2014, 10:09 AM	#25
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Perfect One Piece Push On Door Seals For Burbs Yes, in the truck forum some claimed Dodge Dakota seals were an excellent fit. I tried it and gave up. They bent my window frame and wouldn't allow the door to close. __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

Register or Log In To remove these advertisements.