|
|
|
09-26-2014, 04:25 PM
|
#1 |
|
Registered User
Join Date: Jun 2013
Location: pine bush new york
Posts: 36
|
tires?
how much tire can i fit with stock rear width and 5 inch drop coils? i have a 255-75-15. want to go for a set of street/slicks just not sure how to come up with what tire i can fit.
__________________
72 c10 383 stroker t350 3/5 drop |
|
|
|
09-27-2014, 12:00 AM
|
#2 | |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: tires?
I assume this is on your '72 C10? Is it a fleetside or stepside?
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
09-29-2014, 11:30 AM
|
#3 | |
|
Registered User
Join Date: Jun 2013
Location: pine bush new york
Posts: 36
|
Re: tires?
Quote:
__________________
72 c10 383 stroker t350 3/5 drop |
|
|
|
|
|
10-07-2014, 08:50 PM
|
#4 |
|
Registered User
Join Date: Apr 2013
Location: Oceanside, Ca
Posts: 24
|
Re: tires?
I have 295/50's with a 5" drop on my step side. 15X10's with 5" b.s. I have enough room to fit my fist between sidewall and bed side. I could use about 1/4"-1/2" more back space, the sidewall barely rubs the fender lip when its loaded down.
__________________
70' stepside, 3/5 drop, 15x8/15x10 with 255/60 and 295/50's |
|
|
|
|
11-30-2014, 01:24 PM
|
#5 |
|
Registered User
Join Date: Apr 2011
Location: Houston Texas
Posts: 315
|
Re: tires?
I have a 31x14.5 on a stepside. Side wall to side wall is about 17inches. Not a whole lot of room side to side . This would probably be the biggest you could fit with stock sheetmetal and frame. The bed is raised an inch on the frame, and the fenders are moved up an inch on the bed box. The frame at ride heigth is 6". Wheel is a 15x14. The tire diameter helps with the footprint of the tire as well as width. A 30'' is probably where I will go next round on tires but if this does notb give me problems I am ok with the smaller tire.
|
|
|
|
|
12-01-2014, 12:05 AM
|
#6 | |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: tires?
I just don't see how a tire that large will fit inside a stock stepside wheel well.
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
|
12-01-2014, 01:09 AM
|
#7 |
|
Registered User
Join Date: Apr 2011
Location: Houston Texas
Posts: 315
|
Re: tires?
wheel opening is stock, bed box is cut for a tub. It took alot of measuring to figure rear end width axle location . Basically the rear end and bed had to be made to work. Moving the bed up on the frame and moving the fenders up on the box gains over 2 inches to the top of the tire. My axles are actually a little on the short side so I have room to space the wheel out some. The cuts in my fenders are to bring the body line back down after moving the fender up. There was 1 inch added to bring the line down and the step line up angain.
|
|
|
|
|
12-01-2014, 01:14 AM
|
#8 |
|
Registered User
Join Date: Apr 2011
Location: Houston Texas
Posts: 315
|
Re: tires?
sorry did not see stock rear end housing in original post. I dont think mine is much narrower than a stock rear end.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
