Disc brakes with stock 15" wheels

[Sturvin]

Anyone know of a kit that will work with a set of stock 15" wheels? Looking for front kits specifically, not going to get into the rears for now.

I like the look of the wheels now, I would just like to be able to stop.

FYI, '69 c-10, stock 6 lug wheels.

[N2TRUX]

There are aftermarket kits that allow you to convert to 6 lug disc. Check with the Forum Vendors in the Marketplace for more info.

[lolife99]

Even with the aftermarket 6- lug disc brake kits,... You won't be able to use your stock front 6-lug wheels. They don't have enough clearance for the the disc brake caliper. There is a ton on info on this sight about this very subject.
You will need a 71-87 4x4 wheel to clear the caliper.
Not a big deal, you just have to find these 4-nub oem wheels.

Look at ECE for disc conversion parts.
www.earlyclassic.com

[NC_John]

Originally Posted by lolife99

Even with the aftermarket 6- lug disc brake kits,... You won't be able to use your stock front 6-lug wheels. They don't have enough clearance for the the disc brake caliper. There is a ton on info on this sight about this very subject.
You will need a 71-87 4x4 wheel to clear the caliper.
Not a big deal, you just have to find these 4-nub oem wheels.

Look at ECE for disc conversion parts.
www.earlyclassic.com

You said in an old thread that all the wheel vintages work. All of them? I want to run a 15x6 steelie up front with 3.75" back spacing. Will that work or should I suck it up and scope out some 17/18's?

[lolife99]

Originally Posted by NC_John

You said in an old thread that all the wheel vintages work. All of them? I want to run a 15x6 steelie up front with 3.75" back spacing. Will that work or should I suck it up and scope out some 17/18's?

Wheel Vintiques wheels will clear the disc brake caliper.
I have 15x7's with a 4" backspace on my red '69.
But I trim the lower a-arm at the balljoint.
3.75" BS should not be an issue.

[NC_John]

Originally Posted by lolife99

Wheel Vintiques wheels will clear the disc brake caliper.
I have 15x7's with a 4" backspace on my red '69.
But I trim the lower a-arm at the balljoint.
3.75" BS should not be an issue.

Thanks Keith!

[NC_John]

Originally Posted by lolife99

Wheel Vintiques wheels will clear the disc brake caliper.
I have 15x7's with a 4" backspace on my red '69.
But I trim the lower a-arm at the balljoint.
3.75" BS should not be an issue.

They (wheel vintiques 15x6) don't fit with my new disc brakes. Back to the drawing board. At least I checked before I painted them.

[lolife99]

Originally Posted by NC_John

They (wheel vintiques 15x6) don't fit with my new disc brakes. Back to the drawing board. At least I checked before I painted them.

What is "not clearing"?
Caliper?
Lower a-arm?

[lolife99]

Look at this thread,...
http://67-72chevytrucks.com/vboard/s...d.php?t=560599

[lolife99]

A lot of the aftermarket calipers have excess casting on them that can easily be ground off if there is a rub somewhere.
I've never had issues with Wheel Vintiques wheels.

[NC_John]

Originally Posted by lolife99

A lot of the aftermarket calipers have excess casting on them that can easily be ground off if there is a rub somewhere.
I've never had issues with Wheel Vintiques wheels.

I am not grinding my brand new wilwood calipers!

[lolife99]

Originally Posted by NC_John

I am not grinding my brand new wilwood calipers!

Wilwood D52's would be the exception to the poor castings of chinese aftermarket calipers that I was talking about,...

[NC_John]

Originally Posted by lolife99

Wilwood D52's would be the exception to the poor castings of chinese aftermarket calipers that I was talking about,...

I will mess around with it today and see if a spacer might give me enough clearance for now. I am going to go bigger wheels later so it might be a reasonable solution to what will be a temporary problem.

[engairuph]

Captain fab makes parts for a 15" rim and everything fits well. He's on this site