![]() |
|
![]() |
#1 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
292 carb.
I have a carburetor from an 81 292 engine. It has the electric choke so it can be used on any manifold without divorced coil & linkage. The vacuum pulloff works & the heater coil works. as does the idle selinoid. It should have a kit put in before use as it has been setting for a long time. This carb has a larger bore & venturi then the 250. It has no rust or corrosion. $50 plus $15 shipping.
George SOLD Last edited by Wrenchbender Ret; 01-23-2016 at 05:45 PM. Reason: Sold |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2015
Location: Lake Placid, FL.
Posts: 67
|
Re: 292 carb.
I sent you a PM.....Dave
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
Re: 292 carb.
I replied.
George |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Aug 2015
Location: Pine Mountain, Georgia
Posts: 125
|
Re: 292 carb.
Can I replace my stock carb on my 250 with this???
__________________
71 C10 I6 250 TH350 power steering and power breaks... |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
Re: 292 carb.
It will fit good but I'm not sure how it will run. It has larger throat & venturies then the 250. Dave has first pick at it.
George |
![]() |
![]() |
![]() |
Bookmarks |
|
|