Need a little help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dads64 · 01-23-2017, 12:20 AM

Does anyone know if the measurement between these two mounts are the same on all the 64-66 trucks? The red cab is a 66 and the other a 64 but the distance in different from one cab to the other and I am not sure it should be. Need to figure it out before I try to use the 66 cab as a replacement for the 64.

Thanks all,
Jay

LostMy65 · 01-23-2017, 09:13 PM

Quote:

Originally Posted by Dads64

Does anyone know if the measurement between these two mounts are the same on all the 64-66 trucks? The red cab is a 66 and the other a 64 but the distance in different from one cab to the other and I am not sure it should be. Need to figure it out before I try to use the 66 cab as a replacement for the 64.

Thanks all,
Jay

You can easily interchange 64-66 cabs. They're all the same.

LostMy65 · 01-23-2017, 09:15 PM

If you're finding a difference, that's really, really unusual. There shouldn't be any.

**Captainfab** · 01-24-2017, 12:30 AM

The '64-'66 C10,20 & 30 cabs are identical. And as far as the inner fender mounts, the '60-'63's are the same dimension in that respect

Dads64 · 01-24-2017, 11:42 AM

Thanks guys, I will get out there and measure it again. I don't remember the numbers now but they were about an inch or so off if I recall. I know the '66 had front end damage but can't/couldn't see any damage to the cab at all.

Dads64 · 02-01-2017, 06:21 PM

So I finally got out there and sure enough they are right at an inch different.

Not sure why the pics are sideways, sorry about that.

**PGSigns** · 02-02-2017, 07:37 AM

Can you take pictures looking straight on at the firewall? Being able to see both from this view may help see what is going on.
Jimmy

Dads64 · 02-21-2017, 10:27 PM

Best I could get without laying the red one back down

**PGSigns** · 02-22-2017, 07:40 AM

Looks like they have both been moved around some over the years or its just the difference between 2 assembly plants. I would not have a problem with proceeding on. It is just the support for the lower corner of the inner fender and if it needs a tweek during assembly a wack with a rubber mallet will make the adjustment.
Jimmy

**paulspickupparts** · 02-22-2017, 11:10 AM

Did both cabs come off a pickup? Or did one come off a pickup and the other off a C60 or larger truck? Usually the floor and trans cover is a giveaway . Trying to look at the weathering of the inner fenders to see if it is the same width as big trucks also took a different inner fender. Too hard to tell in the photo

01-23-2017, 12:20 AM	#1
Dads64 Registered User Join Date: Jan 2012 Location: Minot, ND Posts: 60	Need a little help Does anyone know if the measurement between these two mounts are the same on all the 64-66 trucks? The red cab is a 66 and the other a 64 but the distance in different from one cab to the other and I am not sure it should be. Need to figure it out before I try to use the 66 cab as a replacement for the 64. Thanks all, Jay Attached Images

01-23-2017, 09:15 PM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: Need a little help If you're finding a difference, that's really, really unusual. There shouldn't be any. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-24-2017, 12:30 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Need a little help The '64-'66 C10,20 & 30 cabs are identical. And as far as the inner fender mounts, the '60-'63's are the same dimension in that respect __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-24-2017, 11:42 AM	#5
Dads64 Registered User Join Date: Jan 2012 Location: Minot, ND Posts: 60	Re: Need a little help Thanks guys, I will get out there and measure it again. I don't remember the numbers now but they were about an inch or so off if I recall. I know the '66 had front end damage but can't/couldn't see any damage to the cab at all.

02-01-2017, 06:21 PM	#6
Dads64 Registered User Join Date: Jan 2012 Location: Minot, ND Posts: 60	Re: Need a little help So I finally got out there and sure enough they are right at an inch different. Not sure why the pics are sideways, sorry about that. Attached Images

02-02-2017, 07:37 AM	#7
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Need a little help Can you take pictures looking straight on at the firewall? Being able to see both from this view may help see what is going on. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

02-21-2017, 10:27 PM	#8
Dads64 Registered User Join Date: Jan 2012 Location: Minot, ND Posts: 60	Re: Need a little help Best I could get without laying the red one back down Attached Images

02-22-2017, 07:40 AM	#9
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Need a little help Looks like they have both been moved around some over the years or its just the difference between 2 assembly plants. I would not have a problem with proceeding on. It is just the support for the lower corner of the inner fender and if it needs a tweek during assembly a wack with a rubber mallet will make the adjustment. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

02-22-2017, 11:10 AM	#10
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: Need a little help Did both cabs come off a pickup? Or did one come off a pickup and the other off a C60 or larger truck? Usually the floor and trans cover is a giveaway . Trying to look at the weathering of the inner fenders to see if it is the same width as big trucks also took a different inner fender. Too hard to tell in the photo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.