1971 4x4 Short Bed Fleet side Followed Me Home

[orangek5]

Just brought it home yesterday. Don't know how original it is, no spid. Title, VIN plate, and frame stamp all match. It was born with 250ci IL 6, now has 327ci. Fender says Cheyenne, IDK? Has Tach, tilt steering, ralley wheels, 4 speed, front disc, front bumper guards, and usual rust. I'm super stoked.

We also Stopped by LMC's to get some accessories.

My wife, one of my boys, and I were up until 1:00am and spent this morning changing master cylinder, rear wheel cylinders, and chasing down a clog in brake line to rear wheels (found it in separation block that attaches to rear axel and replaced). We also put on rear LED tail lights and cowl induction hood. Next we are going to replace the front bumper.

Here are some Pictures.

Following Me Home


My Son's Hauler


LMC for Cowl Hood, LED's, Shift Boots, Front Bumper


Install Master Cylinder


The Test Drive

[rjs53]

SCORE! I like it, looks like a truck should

[57taskforce]

I’m not seeing much of the “normal rust” in those pictures! Looks like a great score!

[orangek5]

Been working on my k10. Replaced Radiator, Radiator core support and support mounts, Passenger fender(used original), inner(chrome) and outer grille, battery Tray(stainless), valve covers, air breather, Wire gutters (core support and firewall gutters) heater box(used with new gaskets), heater core

Where it started

1.

2.

3.

4.

[orangek5]

More.
6.

7.

8.

9.

Before and after.

[orangek5]

And more.
Engine before

After

Still need to clean up some wires.

[jessemthompson]

Looking good so far brother. Nice score.

[orangek5]

Originally Posted by jessemthompson

Looking good so far brother. Nice score.

Thank you.

[D.PASSMORE]

Could be a Cheyenne, it has the rear cab light. Any welded up trim holes in the body panels? How about a headliner? If its a true 71cab, it will have a raised area where rear view mirror mounts to cab.

Looking good though!

[AussieinNC]

Safety suggestion...

Swap out that plastic bodied fuel filter for a metal cased one...

Plastic over time will crack due to under hood heat...

Nice truck!

[orangek5]

Originally Posted by AussieinNC

Safety suggestion...

Swap out that plastic bodied fuel filter for a metal cased one...

Plastic over time will crack due to under hood heat...

Nice truck!

Thanks for the advise. It did help me solve a rusty tank problem though. After I completed the first phase of the fixer up brakes and all. I took it to the carwash and almost didn't make it. So I replaced the cheapest first. Fuel filter with clear plastic. It clogged up really quickly with rust that I could see through the clear filter. So out with the tank, tank to a local tank wash, back in which lead me to carb bowl full of rust. So now that all is running good, and clean. I think a metal filter is tomorrow's project