4 x 4 axles for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mnick · 11-23-2003, 12:18 PM

I have a set of 4 x 4 axles for sale.
they came from a 73 k5 blazer
the front is a dana 44 with disk brakes and 4.10 gears
the rear is a 12 bolt with 4.10 gears and a posi
both are in working condition the front might need new calipers
I'm asking $300 for both. please reply to the thread.

mutant-jimbo · 11-24-2003, 11:30 PM

wish you were closer, id snatch them up in a heartbeat

Mark540 · 12-03-2003, 05:57 PM

Might be interested, only need the front though so how much lower would you go, or would you seperate?

mnick · 12-04-2003, 09:27 AM

I'd take 250.00 for them.
I'd rather sell them as a pair.
You can call me at 937-623-1769
I could seperate them I guess.
mike

mnick · 12-04-2003, 06:29 PM

I also have a three speed trans and transfer case
from the same 73 blazer for sale.
the transfer case is a part time unit
$75 for both. I'd prefer not to try and ship them

Mark540 · 12-04-2003, 06:37 PM

OK how much for just the front axle, I can pick it up in Xenia.

mnick · 12-04-2003, 07:11 PM

$125 for the front axle

Mark540 · 12-04-2003, 07:24 PM

Thanks, I really want to find one in $75 range as I am going to strip it for the brake parts only.

dalejr8 · 12-15-2003, 02:18 AM

I have 2 sets of complete axles front and rears. $50.00 a piece (no shipping)

Mark540 · 12-15-2003, 06:16 PM

Dalejr, do these need rebuilt? what year are they?

dalejr8 · 12-15-2003, 09:59 PM

MARK540 AS FAR AS I KNOW THEY DO NOT NEED TO BE REBUILT THEY WORKED FINE WHEN I PARTED OUT THE TRUCKS ONE SET IS A 79 AND ONE IS A 82

mnick · 12-16-2003, 09:46 AM

OK I need these axles gone!
I'll take $250 for everything.
axles, trans, and transfer case.
maybe willing to trade for some good tires (33x12.5x16.5)

76vandura · 12-16-2003, 06:58 PM

I'd love to pick up that dana 44. I am in Ohio. Would it take any modifications to put it on my 82? I am in the process of taking out the front end to put on a lift. Now would be the time to switch axles. I have already changed the rear over the weekend to a 14 bolt 8 lug rear end. Thanks

mnick · 12-17-2003, 09:39 AM

my axles are 6 lug I dont know if that matters to you.
From what I can tell the front should bolt in as well as the rear.
check out my other thread called "axle fitment"
thanks, mike

Mark540 · 12-18-2003, 11:21 PM

Could you check the spring pad width on the back axle, I might do a total change out if you still have them available.

THanks Mark

mnick · 12-19-2003, 09:23 AM

I'll check it out tonight.
give me a call if you want info quicker
937-623-1769

76vandura · 12-20-2003, 05:53 PM

I just converted to 8 lug, so I can't use the 6 lug. I really wanted a dana for my front end

Thanks anyway...

mnick · 12-21-2003, 10:48 PM

the rear axle is 42.5" from spring center to center

chevy68388 · 12-24-2003, 01:29 AM

hey mnick did u ever get that 68 going i just wondered what it looks like now

mnick · 12-24-2003, 05:21 PM

I sold off some of the parts, the cab went to the scrap yard it ended up being worse than the one i had.. the only thing I'm using from it are the doors.

chevy68388 · 12-25-2003, 02:33 AM

aww man sorry bout that were te fenders good off it i never realy tore in to it much to see how bad it was

*1FaastC10* · 12-25-2003, 04:18 PM

still got the axles/trans/transfer case? what trans and case is it?

mnick · 12-26-2003, 10:00 PM

yes, I still have all of it the trans is a 3 speed manual and
the transfer case is (a 205 i think) part time and gear drive
unit

mnick · 01-14-2004, 06:49 PM

TTT

*1FaastC10* · 01-14-2004, 07:08 PM

what do you want for just hte case?

11-23-2003, 12:18 PM	#1
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	4 x 4 axles for sale I have a set of 4 x 4 axles for sale. they came from a 73 k5 blazer the front is a dana 44 with disk brakes and 4.10 gears the rear is a 12 bolt with 4.10 gears and a posi both are in working condition the front might need new calipers I'm asking $300 for both. please reply to the thread.

11-24-2003, 11:30 PM	#2
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	wish you were closer, id snatch them up in a heartbeat __________________ "Texas is an outrage when your husband is dead, Texas is an outrage when they pick up his head, Texas is the reason why the presidents dead"-bullet by The Misfits

12-03-2003, 05:57 PM	#3
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Might be interested, only need the front though so how much lower would you go, or would you seperate? __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

12-04-2003, 06:37 PM	#6
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	OK how much for just the front axle, I can pick it up in Xenia. __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

12-04-2003, 07:24 PM	#8
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Thanks, I really want to find one in $75 range as I am going to strip it for the brake parts only. __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

12-04-2003, 09:27 AM	#4
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I'd take 250.00 for them. I'd rather sell them as a pair. You can call me at 937-623-1769 I could seperate them I guess. mike

12-04-2003, 06:29 PM	#5
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I also have a three speed trans and transfer case from the same 73 blazer for sale. the transfer case is a part time unit $75 for both. I'd prefer not to try and ship them

12-04-2003, 07:11 PM	#7
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	$125 for the front axle

12-15-2003, 02:18 AM	#9
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	I have 2 sets of complete axles front and rears. $50.00 a piece (no shipping)

12-15-2003, 06:16 PM	#10
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Dalejr, do these need rebuilt? what year are they? __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

12-15-2003, 09:59 PM	#11
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	MARK540 AS FAR AS I KNOW THEY DO NOT NEED TO BE REBUILT THEY WORKED FINE WHEN I PARTED OUT THE TRUCKS ONE SET IS A 79 AND ONE IS A 82

12-16-2003, 09:46 AM	#12
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	OK I need these axles gone! I'll take $250 for everything. axles, trans, and transfer case. maybe willing to trade for some good tires (33x12.5x16.5)

12-16-2003, 06:58 PM	#13
76vandura Registered User Join Date: Sep 2002 Location: Cambridge, OH Posts: 64	I'd love to pick up that dana 44. I am in Ohio. Would it take any modifications to put it on my 82? I am in the process of taking out the front end to put on a lift. Now would be the time to switch axles. I have already changed the rear over the weekend to a 14 bolt 8 lug rear end. Thanks __________________ 76 Gmc Vandura Custom, RIP 82 K30 4x4 6" Lift, Built 350, many mods 84 cutlass 350 chevy out of my vandura

12-17-2003, 09:39 AM	#14
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	my axles are 6 lug I dont know if that matters to you. From what I can tell the front should bolt in as well as the rear. check out my other thread called "axle fitment" thanks, mike

12-18-2003, 11:21 PM	#15
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Could you check the spring pad width on the back axle, I might do a total change out if you still have them available. THanks Mark __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's



Register or Log In To remove these advertisements.

12-19-2003, 09:23 AM	#16
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I'll check it out tonight. give me a call if you want info quicker 937-623-1769

12-20-2003, 05:53 PM	#17
76vandura Registered User Join Date: Sep 2002 Location: Cambridge, OH Posts: 64	I just converted to 8 lug, so I can't use the 6 lug. I really wanted a dana for my front end Thanks anyway... __________________ 76 Gmc Vandura Custom, RIP 82 K30 4x4 6" Lift, Built 350, many mods 84 cutlass 350 chevy out of my vandura

12-21-2003, 10:48 PM	#18
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	the rear axle is 42.5" from spring center to center

12-24-2003, 01:29 AM	#19
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	hey mnick did u ever get that 68 going i just wondered what it looks like now __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

12-24-2003, 05:21 PM	#20
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I sold off some of the parts, the cab went to the scrap yard it ended up being worse than the one i had.. the only thing I'm using from it are the doors.

12-25-2003, 02:33 AM	#21
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	aww man sorry bout that were te fenders good off it i never realy tore in to it much to see how bad it was __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

12-25-2003, 04:18 PM	#22
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	still got the axles/trans/transfer case? what trans and case is it?

12-26-2003, 10:00 PM	#23
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	yes, I still have all of it the trans is a 3 speed manual and the transfer case is (a 205 i think) part time and gear drive unit

01-14-2004, 06:49 PM	#24
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	TTT

01-14-2004, 07:08 PM	#25
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	what do you want for just hte case?

Register or Log In To remove these advertisements.