Speaker Wires and Speaker Placemnet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TDH1989 · 03-11-2020, 10:31 PM

I'm adding a stereo system to my 67 C10. Right now it has no wiring whatsoever but PO has cut out 6x9 holes in the doors. Can you guys possibly post some threads on guys who have added systems and how they set them up. Ex. How they drilled through the doors to run their speakers and speaker wires. Pictures would help of your set up if no threads.

Thanks

Metaldoc · 03-12-2020, 03:55 AM

These might help ya, measured from the hinge.

TDH1989 · 03-12-2020, 09:17 AM

Quote:

Originally Posted by Metaldoc

These might help ya, measured from the hinge.

Thanks man. This helps out a lot

Mike C · 03-13-2020, 07:40 AM

I drilled the door and the cab pillar offset. Cab pillar just below the courtesy switch and put a grommet in hole. Door about 4-5” lower than that with grommet. Offsetting the wire like that lets it lay flat between door and cab when you close the door.

Here is a link to the install I did on my ‘69.
http://67-72chevytrucks.com/vboard/s...d.php?t=659786

03-11-2020, 10:31 PM	#1
TDH1989 Registered User Join Date: Mar 2014 Location: Houston Texas Posts: 68	Speaker Wires and Speaker Placemnet I'm adding a stereo system to my 67 C10. Right now it has no wiring whatsoever but PO has cut out 6x9 holes in the doors. Can you guys possibly post some threads on guys who have added systems and how they set them up. Ex. How they drilled through the doors to run their speakers and speaker wires. Pictures would help of your set up if no threads. Thanks

03-12-2020, 03:55 AM	#2
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: Speaker Wires and Speaker Placemnet These might help ya, measured from the hinge. Attached Images __________________ Do it, Do it right, Do it right the first time

03-13-2020, 07:40 AM	#4
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Re: Speaker Wires and Speaker Placemnet I drilled the door and the cab pillar offset. Cab pillar just below the courtesy switch and put a grommet in hole. Door about 4-5” lower than that with grommet. Offsetting the wire like that lets it lay flat between door and cab when you close the door. Here is a link to the install I did on my ‘69. http://67-72chevytrucks.com/vboard/s...d.php?t=659786 __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.