64 Chevy C10 Spindle Confirmation - The 1947 - Present Chevrolet & GMC Truck Message Board Network

elane352 · 08-17-2020, 04:31 PM

Good Afternoon!

Forgive me. When I uploaded my spindle picture, the upload process turned the picture 180 degrees. So it is totally upside down.

I could not figure out how to turn it back round once I uploaded to the site. Please tell me how to correct this for the future. I am hoping that when you read this, the picture can be rotated.

Since my wheel bearing have gotten noisy, and since I have no idea how long the current rotors and calipers have been on, I wanted to change out the entire setup. I am hoping I can use the existing spindles.

Can you tell from the picture if the spindle looks like an OEM drum spindle? I think it is. My desire is to use the existing spindles. I took that approach for my Chevy car and it worked out fine. If I go this route, I just want to make sure and not order a kit that will not be compatible with the spindles I have.

I will be thankful for all responses.

Edward

**Captainfab** · 08-17-2020, 09:42 PM

No that is definitely not an original drum brake spindle. It looks to me like a '73-'87 spindle. It is quite easy and in expensive to just change the bearings and seals.

elane352 · 08-17-2020, 11:15 PM

I hear you Captain. Thank you.

Edward

SCOTI · 08-18-2020, 09:51 AM

Saved & flipped.….

08-17-2020, 04:31 PM	#1
elane352 Registered User Join Date: Jul 2014 Location: Bowie, Maryland Posts: 82	64 Chevy C10 Spindle Confirmation Good Afternoon! Forgive me. When I uploaded my spindle picture, the upload process turned the picture 180 degrees. So it is totally upside down. I could not figure out how to turn it back round once I uploaded to the site. Please tell me how to correct this for the future. I am hoping that when you read this, the picture can be rotated. Since my wheel bearing have gotten noisy, and since I have no idea how long the current rotors and calipers have been on, I wanted to change out the entire setup. I am hoping I can use the existing spindles. Can you tell from the picture if the spindle looks like an OEM drum spindle? I think it is. My desire is to use the existing spindles. I took that approach for my Chevy car and it worked out fine. If I go this route, I just want to make sure and not order a kit that will not be compatible with the spindles I have. I will be thankful for all responses. Edward Attached Images

08-17-2020, 09:42 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 64 Chevy C10 Spindle Confirmation No that is definitely not an original drum brake spindle. It looks to me like a '73-'87 spindle. It is quite easy and in expensive to just change the bearings and seals. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-17-2020, 11:15 PM	#3
elane352 Registered User Join Date: Jul 2014 Location: Bowie, Maryland Posts: 82	Re: 64 Chevy C10 Spindle Confirmation I hear you Captain. Thank you. Edward

08-18-2020, 09:51 AM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: 64 Chevy C10 Spindle Confirmation Saved & flipped.…. Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.