Guys! I found the motherload! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 01-18-2004, 01:57 AM

Get this -- 18 (yes 18, that isn't a typo) 0 original mile 1982 trucks. The guy bought all 18 in 82 to act as some sort of a tax saver for his mine, he is now trying to sell them for 14 000 cnd a peice. Those trucks have been stored in a heated, paved shop and are in absolute mint condition. None of them have more than 2 miles on the speedo, and have been run once a month for 5 minutes to keep them from freezing up. All colors, types, trim levels and options. All in absolute complete mint condition, just dusty.

Now if only he would stop being so stupid and sell them for more like 7000 a peice, he could make a lot of money off those trucks. All of them are for sale. Anyone wanna lend me 14 grand? LOL

ocbaud · 01-18-2004, 02:18 AM

$10,787.49 us dollers.

i dont think so mister.
if he did go down to half that, i would FOR SURE buy one

Russell · 01-18-2004, 02:32 AM

I agree totally -- Cut it by 50% and even I would buy one.

They are located in Chinchagua, Alberta, about 8 hours north of Edmonton.

SixthFloorFreak · 01-18-2004, 04:31 AM

seeing the Cnd to US conversion...the price doesn't seem that bad to me. a brand new truck, that you could drive for a long time without fear of it tearing up. maybe i'm just

ItsNotABlazer · 01-18-2004, 10:54 AM

Hmmmm engines, trans etc etc sitting for 22 years..........might have a little more expense there after you bought one. It would be a cool conversation piece but having a restored/modified truck that is exactly how you want it would be more inline with my way of thinking. How bout some pics of all these trucks?

Brad

**old Rusty C10** · 01-18-2004, 11:19 AM

well if they ran the motors you may get some time out of them but im betting you go for a transmission right away, also im betting you wind up doin brake work on em too half that id find $$$ for one

bigblock73 · 01-18-2004, 01:11 PM

If I had the money, I'd buy one!

What models does he have? Shortbed? Long bed? 2wd? 4wd?

How about engine & suspension options?

Do you have a phone number?

grape · 01-18-2004, 02:15 PM

are there any 6.2's in a shortbed?

Blue Beard · 01-18-2004, 02:15 PM

The US amount would be about the sticker price here when they came out..........

If they were cheaper I'd be interested too....

But what then would be needed to bring them into the US...........?

grape · 01-18-2004, 02:17 PM

I'm interested........do you have a list of all these trucks and options?

Russell · 01-18-2004, 02:45 PM

I'll get contact information for you fellas, and do the best I can to get you guys some pictures, the guy who owns them is like 75+ and doesn't have much for technology. He Chinchagua is also like 8 hours north of me. My father goes up there often as he is supervising a plant up there. He was talking with some of the guys about this fella who was trying to get his company to buy the trucks.

brad2 · 01-18-2004, 02:48 PM

Doesn't sound to bad to me. I would expect to have to do some work on them but you can't restore on for that amount of money. I'd be interested in knowing what is available as well.

grape · 01-18-2004, 02:52 PM

damn......what a ride home back here to texas

1980chevy4x4 · 01-18-2004, 03:29 PM

Is there any 4x4s?

Russell · 01-18-2004, 05:52 PM

I would assume so... I'm sure he just walked in and asked for random combinations of options, and colors etc, talk about a happy dealership, lol!

**N2TRUX** · 01-18-2004, 07:35 PM

Hmmm? It sounds interesting to me...

LOHRTBT · 01-19-2004, 12:28 PM

THat is awesome!!

PHOENIX · 01-19-2004, 03:38 PM

Lets see some pictures!

Lynx · 01-19-2004, 10:15 PM

Thats awsome! too bad its not a bit cheaper, the i would be there in an instant with several friends and relatives! LOL, i just wanna see all of these mint trucks!

Ben

Russell · 01-19-2004, 10:29 PM

I'll do my best to get some pictures, thats a long ways north :P

Kybol · 01-20-2004, 12:14 AM

Where are they at?

Lynx · 01-20-2004, 01:32 AM

he said it was in Chinchagua, alberta 8 hours north of edmonton... Im not positive but i think that is in the peace country some place? also would like to know where exactly these trucks are.

Ben

ElGracho · 01-20-2004, 02:00 AM

Isn't that like the arctic circle?

Russell · 01-20-2004, 02:50 AM

Quote:

Originally posted by Lynx
he said it was in Chinchagua, alberta 8 hours north of edmonton... Im not positive but i think that is in the peace country some place? also would like to know where exactly these trucks are.

Ben

It would be about a 11 hour drive (non-stop) for you, you would have to head down to Athabasca, up through Grand Prairie, then up to Manning where the fella himself lives. Here is a map of the area, I marked about where Manning is.

My father doesn't know if the guy is quite ready to sell them yet, but that is the basic price he is looking for, and he sounds pretty firm about the 14 000 per unit.

I asked my father to see if he could maybe snap some pictures next time he is in the area, not sure if he will get the chance or not...

Anyways, here is the map:

79BIG10 · 01-20-2004, 05:09 AM

Wish I could afford one and drive it home.

01-18-2004, 01:57 AM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Guys! I found the motherload! Get this -- 18 (yes 18, that isn't a typo) 0 original mile 1982 trucks. The guy bought all 18 in 82 to act as some sort of a tax saver for his mine, he is now trying to sell them for 14 000 cnd a peice. Those trucks have been stored in a heated, paved shop and are in absolute mint condition. None of them have more than 2 miles on the speedo, and have been run once a month for 5 minutes to keep them from freezing up. All colors, types, trim levels and options. All in absolute complete mint condition, just dusty. Now if only he would stop being so stupid and sell them for more like 7000 a peice, he could make a lot of money off those trucks. All of them are for sale. Anyone wanna lend me 14 grand? LOL __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

01-18-2004, 02:32 AM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I agree totally -- Cut it by 50% and even I would buy one. They are located in Chinchagua, Alberta, about 8 hours north of Edmonton. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

01-18-2004, 10:54 AM	#5
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Hmmmm engines, trans etc etc sitting for 22 years..........might have a little more expense there after you bought one. It would be a cool conversation piece but having a restored/modified truck that is exactly how you want it would be more inline with my way of thinking. How bout some pics of all these trucks? Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

01-18-2004, 11:19 AM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,281	well if they ran the motors you may get some time out of them but im betting you go for a transmission right away, also im betting you wind up doin brake work on em too half that id find $$$ for one __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-18-2004, 01:11 PM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	If I had the money, I'd buy one! What models does he have? Shortbed? Long bed? 2wd? 4wd? How about engine & suspension options? Do you have a phone number? __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-18-2004, 02:18 AM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	$10,787.49 us dollers. i dont think so mister. if he did go down to half that, i would FOR SURE buy one

01-18-2004, 04:31 AM	#4
SixthFloorFreak Registered User Join Date: Dec 2003 Location: Morgantown, KY Posts: 103	seeing the Cnd to US conversion...the price doesn't seem that bad to me. a brand new truck, that you could drive for a long time without fear of it tearing up. maybe i'm just

01-18-2004, 02:15 PM	#8
grape Registered User Join Date: Dec 2003 Location: Ft. Worth, TX Posts: 86	are there any 6.2's in a shortbed?

01-18-2004, 02:15 PM	#9
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	The US amount would be about the sticker price here when they came out.......... If they were cheaper I'd be interested too.... But what then would be needed to bring them into the US...........? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-18-2004, 02:17 PM	#10
grape Registered User Join Date: Dec 2003 Location: Ft. Worth, TX Posts: 86	I'm interested........do you have a list of all these trucks and options?

01-18-2004, 02:45 PM	#11
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I'll get contact information for you fellas, and do the best I can to get you guys some pictures, the guy who owns them is like 75+ and doesn't have much for technology. He Chinchagua is also like 8 hours north of me. My father goes up there often as he is supervising a plant up there. He was talking with some of the guys about this fella who was trying to get his company to buy the trucks. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

01-18-2004, 02:48 PM	#12
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,058	Doesn't sound to bad to me. I would expect to have to do some work on them but you can't restore on for that amount of money. I'd be interested in knowing what is available as well. __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

01-18-2004, 02:52 PM	#13
grape Registered User Join Date: Dec 2003 Location: Ft. Worth, TX Posts: 86	damn......what a ride home back here to texas

01-18-2004, 03:29 PM	#14
1980chevy4x4 Got Mud? Join Date: Sep 2003 Posts: 361	Is there any 4x4s? __________________ Dan Got mud?

01-18-2004, 05:52 PM	#15
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I would assume so... I'm sure he just walked in and asked for random combinations of options, and colors etc, talk about a happy dealership, lol! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

01-18-2004, 07:35 PM	#16
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Hmmm? It sounds interesting to me... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-19-2004, 12:28 PM	#17
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	THat is awesome!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-19-2004, 03:38 PM	#18
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Lets see some pictures! __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

01-19-2004, 10:15 PM	#19
Lynx Registered User Join Date: Jun 2003 Location: Fort McMurray, Alberta, Canada Posts: 513	Thats awsome! too bad its not a bit cheaper, the i would be there in an instant with several friends and relatives! LOL, i just wanna see all of these mint trucks! Ben __________________ Ben 1983 Silverado SWB 305 2002 Silverado Extended Cab 5.3 http://members.shaw.ca/bkennett

01-19-2004, 10:29 PM	#20
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I'll do my best to get some pictures, thats a long ways north :P __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

01-20-2004, 12:14 AM	#21
Kybol Registered User Join Date: Mar 2003 Location: Alberta, Canada Posts: 205	Where are they at? __________________ -90 454ss http://www.imagestation.com/album/?id=4289115843 -04 TRX450R -77 c-10 http://www.imagestation.com/album/?id=4290506213 SOLD -82 c-10 SOLD -02 CRF450 SOLD

01-20-2004, 01:32 AM	#22
Lynx Registered User Join Date: Jun 2003 Location: Fort McMurray, Alberta, Canada Posts: 513	he said it was in Chinchagua, alberta 8 hours north of edmonton... Im not positive but i think that is in the peace country some place? also would like to know where exactly these trucks are. Ben __________________ Ben 1983 Silverado SWB 305 2002 Silverado Extended Cab 5.3 http://members.shaw.ca/bkennett

01-20-2004, 02:00 AM	#23
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,550	Isn't that like the arctic circle? __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

01-20-2004, 05:09 AM	#25
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Wish I could afford one and drive it home. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

Register or Log In To remove these advertisements.