![]() |
Register or Log In To remove these advertisements. |
|
|
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
|
#1 |
|
Registered User
Join Date: Aug 2012
Location: concord ga
Posts: 192
|
adding power windows ?
anybody use this kit to make your windows power ? it says it will work with factory power windows or make manuals power ebay item number 265287624694
|
|
|
|
|
|
#2 |
|
Registered User
Join Date: Feb 2007
Location: Memphis MI
Posts: 1,867
|
Re: adding power windows ?
Not getting many responses because there are so many power window trucks out there to pull parts from, most people swap in OEM bits. I picked up a pair of motors and arms from a 1984 taken off in 1988 for $40 at a swap meet this past summer. Complete rotten doors with PW are under $100. Of course, if you have early doors that are not compatible with PW, a kit like this may be your best option.
__________________
1987 2 ton ![]() 1982 250/TH350 beater in progressDad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrappingPlus a mess o' tractors |
|
|
|
|
|
#3 |
|
Junior Member
![]() Join Date: May 2025
Location: Cedar City, UT
Posts: 31
|
Re: adding power windows ?
We offer the Nu-Relics kits for people who want to convert from manual to power windows and get great feedback from the folks who buy them. If you choose to, we can do them with a switch that uses your original window crank, otherwise the standard switches look and fit just like stock squarebody switches. The kits use modern window motors that run far faster than the originals and it makes it a completely new US made package if you don't want to piece together the original system. We have them on the website or you can feel free to give us a call!
https://tuckersparts.com/pages/power-window-kits
__________________
Tuckers Classic Auto Parts 800.544.1955 tuckersparts.com Providing Quality Parts and Tech Support for 1947-1987 Chevy & GMC Trucks for over 30 Years! |
|
|
|
|
|
#4 | |
|
Old Heap Driver
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,646
|
Re: adding power windows ?
Quote:
I did add PW to my 99 Silverado buy purchasing new AC Delco parts and doing the wiring myself.
__________________
_____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver. |
|
|
|
|
|
|
#5 |
|
Senior Member
![]() Join Date: Mar 2003
Location: Colfax-California
Posts: 8,941
|
Re: adding power windows ?
When I had my 78 wrecker the doors were getting really bad. Sourcing from the wrecking yards I found a pair of doors off of an 85 suburban that were power. I took the complete doors and got the wiring harness' also. It was a plug and play with power windows and door locks other than matching the paint
|
|
|
|
![]() |
| Bookmarks |
|
|