1967 C10 Custom Big Window

[nuke1]

I do have one other question for you, whatever happened to your bike, i am looking for an engine for one. just curious? BTW i know all about wrecking those, been down many times also. Stupidity once and the rest have been by a matter of choice, either hit the car cutting me off or put her down, well the road looks better to me than being under a car!

[Slick67]

Originally Posted by nuke1

I do have one other question for you, whatever happened to your bike, i am looking for an engine for one. just curious? BTW i know all about wrecking those, been down many times also. Stupidity once and the rest have been by a matter of choice, either hit the car cutting me off or put her down, well the road looks better to me than being under a car!

Glad to see you are still around to build this truck!!! I still have the front half of the bike, just could not bring myself to get rid of it yet. We had to cut it in half to get the motor out.....sold it to a guy in Dallas, he is using it in a mini sprint car. This was actually my first wreck, but had laid one down a few years back. Still have a few items left from the bike, but not much. BTW....the bed you cut looks great, may consider that in the future. Keep up the great work.

[nuke1]

glad you are ok also, a motor like that in a sprint car would be jsut cool, thanks for the compliments btw.

James

[oldblue1968chevy]

bed looks great, you didall that in 2 weekends??!!!

[Slick67]

Originally Posted by michael bustamante

lookin good, can you take some more pics of the airride set up in the rear, location? where are you gonna mount the tank and compressor?

Here is another pic, it's kinda dark cause I put the bed on for mockup. Hope this helps some.

[Slick67]

Originally Posted by oldblue1968chevy

bed looks great, you didall that in 2 weekends??!!!

Nope. I bought the bed in that condition to move my project forward a month or so. Very little needs to be done to it. Wish I was that fast on the cab!!!!

[Slick67]

Here are some new pics.....cause everyone likes pics. I put the bed on that I bought and put my rim on the back to see how much space I have while running bags and 22X10 rims.....no issues!! There is about 1.5 inches to the fender well and about 1 inch to the lip of the bed. Still need to cut the bumpstops to lower it another 1.5 to 2.5 inches in the back. Yeah...that's a chicken coup in the corner of the lot with a couple of yardbirds in it.

And for all the questions I have read in other threads about gas tanks hanging too low, here is a pic of the Summit tank with the bed on.

[SCOTTMO]

Originally Posted by Slick67

I have recently worked on the sheetmetal - rockers (inners and outers) floor pans, gas filler delete, bed stake holes delete, rear marker light delete, and just started the upper right roof rust delete.
Attachment 445628

Attachment 445629

Attachment 445630
I finished sandblasting and painting the chassis, and started installing the airbags and fuel cell. I did a disk brake 2.5 in drop spindle and added a 71 rearend for the 5 lugs. An adjustable tracbar was a must for the bags and may have to move the front crossmember forward about 1 inch.
Attachment 445631
Attachment 445632

Truck is looking good,something to check into if you have not already with your gas tank,i saw this past weekend on trucks [spike tv] they used the same tank and the filler was right under one of the cross rails for the bed

keep up the good work
scott

[Slick67]

Originally Posted by SCOTTMO

Truck is looking good,something to check into if you have not already with your gas tank,i saw this past weekend on trucks [spike tv] they used the same tank and the filler was right under one of the cross rails for the bed

keep up the good work
scott

Cool, thanks Scottmo! Didn't check it yet......may be time to pull out the cutting wheels!! I will take pics for everyone on the board as to where the crossrail is...as compared to the filler for a longbed. This site has helped tremendously during my build, keep up the great work everyone!!

[my67chevytruck]

keep up the good work...

[Slick67]

Forgot to show some of the detail work that makes these builds take so d@mn long!! Here is the 71 rearend that I bought and had to go through for the 5 lugs.

I sandblasted, preped, and ceramic coated the front calipers.

[72BlckButy]

Great attention to detail, and the truck looks great so far!

[Slick67]

Memorial Day weekend!! Got some more of the body work done, gettin everything straight on the truck with a little body filler here and there. Tipped the cab on it's back to undercoat the bottom after some major cleaning. Hopefully I will get the bottom coated this week.

[Slick67]

Got a little ahead of myself with the pics. Here is one of the bottom of the cab being cleaned, and a pic of the door NAKED!!!

The majority of the cab was stripped down to bare metal.

[Slick67]

Still sandblasting, priming, painting, clear coating parts. Compressor went out so I can't powdercoat right now. Hopefully that will be fixed soon and I can start powdercoating this stuff again.

Everything seems to be turning out great!! No runs or fisheyes!

[my67chevytruck]

sweet work... Wish i had a shop like yours..... keep at it.

[Slick67]

Originally Posted by my67chevytruck

sweet work... Wish i had a shop like yours..... keep at it.

It is actually my freinds long time dream that came true. We enjoy the shop very much. It's got 5 bays and it's about 25 ft deep, and there are two nice little workshops behind it for parts storage and other stuff. Guess I need to get some pics up of his project and the shop. Here is a couple of his project in the shop. **Note the attack cat layin by his frame, he watches the shop for us......seriously. He is the meanest cat I have ever had the displeasure of meeting.....but Tiger is cool.

[my67chevytruck]

I need some friends like That !!!

[Slick67]

Originally Posted by my67chevytruck

I need some friends like That !!!

My friend Ronnie.....or the cat?

[72BlckButy]

Coming right along... keep at it!

[19723DR]

You're doing an excellent job with this truck. I look forward to your progress.

[nuke1]

looking great!

[Slick67]

Welcome to the Houston heat. Managed to get a few things done, like POR 15 the inside floor / firewall of the cab and the front half of the frame, front crossmember, trans crossmember. Also scored a cab/bed lift for $140 bucks off Craigslist, it made the job super easy.

[Slick67]

Originally Posted by my67chevytruck

sweet work... Wish i had a shop like yours..... keep at it.

Here are some shop pics that I promised.

[Slick67]

Wanted to do a mock up, just to see how the truck looks at this point.....wasted time? Nah. It gives you incentive to see what it is looking like after so much work and time.