Amazing '68 C10 from the HUB Garage,... - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

98L150 · 07-15-2009, 10:12 AM

This si a very nice truck.

I'm trying to figure out out if the wheel well openings below the trim have been modified alittle bit?

Also check out the hood peak has been metal worked ntothe cowl too

Quote:

Originally Posted by N2TRUX

With out being negative in any way, lets see how many mods have been done. What I see at a glance from front to back-

Front bumper- Bolts shaved, sucked in and trimmed up.
Headlights- Bezel shaved, light recessed
Sidemarker- Shaved
Cowl-Filled
Windshield-Glass flush fit, posts laid back
Roof- Crown sectioned
Cab-B pillar leaned forward, top chopped
Door- Handle/lock shaved, one piece glass
Gas filler-Shaved
Bed- Floor/wheel wells raised, Tailgate laid forward
Rear Bumper- Shaved, license plate recess filled, sucked in and trimmed up
Tail lights- Flushed
Tailgate- Smoothed, license plate bucket added.

OK, so what did I miss?

ccracin · 07-15-2009, 11:55 AM

I saw this truck over the weekend as well. Very nice indeed.

**DA68** · 07-15-2009, 12:24 PM

I spoke with one of the guys who worked on the build and he was very nice and quite proud of the truck. There are numerous, subtle sheetmetal mods throughout, as noted. The hood was also pancaked and they filled the cab to drip rail area. I assumed they tig welded fillers pcs. and he said they filled the entire cab to rail with Duraglass! This is one mod I might question, from a durability perspective. Bottom line - the truck looked awesome!

powell72 · 07-16-2009, 06:03 PM

That truck is wild! I really like it. The frenched headlights don't do it for me, but we can all find something we don't like on every truck that we didn't put together ourselves.

7T2 · 07-16-2009, 08:53 PM

Quote:

Originally Posted by powell72

we can all find something we don't like on every truck that we didn't put together ourselves.

I can find all sorts of things I don't like on trucks I HAVE put together myself!

07-15-2009, 11:55 AM	#52
ccracin CCTek Join Date: Apr 2007 Location: Rostraver, PA Posts: 235	Re: Amazing '68 C10 from the HUB Garage,... I saw this truck over the weekend as well. Very nice indeed. __________________ Chad 68 swb Project http://67-72chevytrucks.com/vboard/s...d.php?t=262840 72 swb Project SOLD http://67-72chevytrucks.com/vboard/s...=1#post3993641 THANKS TO: Hermance Design (www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Tri-State Machine, Wegner Automotive Research, Nsane Hotrodz (www.nsanehotrodz.com), Clayton Machine Works, CCTek (http://www.candctek.com) Last edited by ccracin; 07-15-2009 at 11:59 AM.

07-15-2009, 12:24 PM	#53
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Re: Amazing '68 C10 from the HUB Garage,... I spoke with one of the guys who worked on the build and he was very nice and quite proud of the truck. There are numerous, subtle sheetmetal mods throughout, as noted. The hood was also pancaked and they filled the cab to drip rail area. I assumed they tig welded fillers pcs. and he said they filled the entire cab to rail with Duraglass! This is one mod I might question, from a durability perspective. Bottom line - the truck looked awesome!

07-16-2009, 06:03 PM	#54
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Amazing '68 C10 from the HUB Garage,... That truck is wild! I really like it. The frenched headlights don't do it for me, but we can all find something we don't like on every truck that we didn't put together ourselves. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.