71 C/10 First project. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

splehigh · 08-27-2009, 10:11 AM

Quote:

Originally Posted by lks dcvn

Here is a link on how to put the doors back together - it actually goes through the tear down which you can reverse to get them finished up.

http://www.67-72chevytrucks.com/vboa...d.php?t=157539

Truck looks good - nice job.

Thanks for the info!

splehigh · 08-31-2009, 10:32 AM

I broke my windshield on Saturday...

I bought my windshield gasket from the Truck Shop. Has anyone used this gasket before? I'm wondering if that is the problem.

I've heard the gaskets from GMC Pauls are good ones. Is that correct?

chevy_mike · 08-31-2009, 11:27 AM

That sucks but from what I have heard, it's not uncommon to break them. Even the Pros do.

Personally I would pay a company to put in a new windshield (buying the gasket and windshield from them) so when the break it, it's their fault and they pay for the next one.

If you supply the windshield and/or gasket, they typically won't take any responsibilty for breaking it.

Good luck.

splehigh · 08-31-2009, 01:22 PM

Quote:

Originally Posted by chevy_mike

That sucks but from what I have heard, it's not uncommon to break them. Even the Pros do.

Personally I would pay a company to put in a new windshield (buying the gasket and windshield from them) so when the break it, it's their fault and they pay for the next one.

If you supply the windshield and/or gasket, they typically won't take any responsibilty for breaking it.

Good luck.

Thanks chevymike!

splehigh · 09-01-2009, 11:46 AM

Took some outside pics last night while transporting the bed to the garage. The bed has more rust in it thatn I realized. The wheel openings have a lot of bondo. I'm going to use the wheel openings from the rusted out fenders I have to fix the bed. Has anyone done this before?

splehigh · 09-01-2009, 11:48 AM

More pics!

splehigh · 09-01-2009, 11:49 AM

More!

brian69longbed · 09-01-2009, 02:41 PM

looking good. my dad had imron paint on his 66 vw beetle after 6 years it still looked freshly painted! what are your plans with the suspension?

splehigh · 09-02-2009, 06:38 AM

Quote:

Originally Posted by brian69longbed

looking good. my dad had imron paint on his 66 vw beetle after 6 years it still looked freshly painted! what are your plans with the suspension?

Thanks! Yeah, I'm hoping the paint lasts a long time.

For now the suspension is going to stay stock. I would like to lower it a little eventually, but I dont want to notch the frame or anything. Its going to be a daily drive/work truck. I was thinking about lowering the back a little and leaving the front stock to level it out, but I'm not sure yet.

What do you think?!?!?

brian69longbed · 09-02-2009, 12:21 PM

Quote:

Originally Posted by splehigh

Thanks! Yeah, I'm hoping the paint lasts a long time.

For now the suspension is going to stay stock. I would like to lower it a little eventually, but I dont want to notch the frame or anything. Its going to be a daily drive/work truck. I was thinking about lowering the back a little and leaving the front stock to level it out, but I'm not sure yet.

What do you think?!?!?

they make a very small notch that bolts to your frame, you have to cut a little but its worth it. and towing or having it as a work truck with the notch shouldn't be an issue. i think its around $150 for the notch and you can buy 2" drop blocks for about $100. but thats all up to you!

splehigh · 09-15-2009, 08:42 AM

New Parts! Still working on the bed. The new bed I bout had a lot more rust than I thought.So I am swapping th inside of my bedsides with the new outside bedsides. If that makes sanse. Its a long process swapping the insides of the bedsides. There are about a million spot welds to drill out.

New parts keep me inspired though. lol

splehigh · 09-18-2009, 09:12 AM

More pics of putting the bed together.

rbeau30 · 09-18-2009, 11:04 AM

I really hate getting all those carriage bolts out

ALL of mine were seized (rust) and they spun around in the holes.

Took about 1 whole day, a lot of swearing, and a few busted knuckles to get them all out.

brian69longbed · 09-18-2009, 03:29 PM

yeah since we're talking about bed carriage bolt removal... DON"T TRY TO HOLD THEM WITH YOUR FINGERS WHILE YOU RUN THE GUN! lets just say i found out the hard way. they get really sharp when they're all rusty ha ha

splehigh · 09-21-2009, 10:13 AM

Quote:

Originally Posted by rbeau30

I really hate getting all those carriage bolts out

ALL of mine were seized (rust) and they spun around in the holes.

Took about 1 whole day, a lot of swearing, and a few busted knuckles to get them all out.

Yeah! Tell me about it guys! lol I ended up grinding the heads of of most of them. PITA!

splehigh · 09-21-2009, 10:20 AM

Here are some pics of welding in the rear corner section of the bedside. Hoping to get the inside of the bedside welded in tonight.

foosed · 09-21-2009, 11:38 AM

great job, but dang, thats alot of work for some bedsides!

splehigh · 09-21-2009, 12:41 PM

Quote:

Originally Posted by foosed

great job, but dang, thats alot of work for some bedsides!

Yeah it definitely is, but I didnt want to spend any more money on the bed. Trying to save up for a house while its still a buyers market.

splehigh · 10-30-2009, 11:08 AM

Still working on the bed but I installed my new shocks last night. The bed will soon be in primer and hopefully it will stay warm enough to paint. Its been in the 60s the last few weeks here in pa.

splehigh · 11-19-2009, 09:54 AM

New rims! American Racing 202S (Daisy). The guy I bought them from had them on his 72 C/10 20 years ago and had them in his barn since then.

splehigh · 11-19-2009, 09:55 AM

Pics

splehigh · 11-19-2009, 09:56 AM

Last pic

splehigh · 11-19-2009, 09:58 AM

Anyone know where I can get some cheap center caps? The local wheel shop wants $70 for the set. Seems a little pricey.

ChiefThinElk · 03-12-2010, 07:24 PM

Sweeeet! Keep the pics coming!

Switch163 · 04-27-2010, 02:22 PM

wow great truck... Paint looks good lot of work on that bed though..

08-31-2009, 10:32 AM	#27
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. I broke my windshield on Saturday... I bought my windshield gasket from the Truck Shop. Has anyone used this gasket before? I'm wondering if that is the problem. I've heard the gaskets from GMC Pauls are good ones. Is that correct?

08-31-2009, 11:27 AM	#28
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: 71 C/10 First project. That sucks but from what I have heard, it's not uncommon to break them. Even the Pros do. Personally I would pay a company to put in a new windshield (buying the gasket and windshield from them) so when the break it, it's their fault and they pay for the next one. If you supply the windshield and/or gasket, they typically won't take any responsibilty for breaking it. Good luck. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

09-01-2009, 11:46 AM	#30
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. Took some outside pics last night while transporting the bed to the garage. The bed has more rust in it thatn I realized. The wheel openings have a lot of bondo. I'm going to use the wheel openings from the rusted out fenders I have to fix the bed. Has anyone done this before? Attached Images

09-01-2009, 11:48 AM	#31
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. More pics! Attached Images

09-01-2009, 11:49 AM	#32
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. More! Attached Images

09-01-2009, 02:41 PM	#33
brian69longbed Registered User Join Date: Nov 2008 Location: chino ca Posts: 215	Re: 71 C/10 First project. looking good. my dad had imron paint on his 66 vw beetle after 6 years it still looked freshly painted! what are your plans with the suspension? __________________ 69' 1/2 ton LONGBED__ _______ \|__\__ \|__(O)______(O)] My build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=354115

09-15-2009, 08:42 AM	#36
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. New Parts! Still working on the bed. The new bed I bout had a lot more rust than I thought.So I am swapping th inside of my bedsides with the new outside bedsides. If that makes sanse. Its a long process swapping the insides of the bedsides. There are about a million spot welds to drill out. New parts keep me inspired though. lol Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153

09-18-2009, 09:12 AM	#37
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. More pics of putting the bed together. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153

09-18-2009, 11:04 AM	#38
rbeau30 Registered User Join Date: Sep 2009 Location: Aurora, CO Posts: 65	Re: 71 C/10 First project. I really hate getting all those carriage bolts out ALL of mine were seized (rust) and they spun around in the holes. Took about 1 whole day, a lot of swearing, and a few busted knuckles to get them all out. __________________ Robert 1971 C20 SWB Fleetside undergoing an amateur restore.

09-18-2009, 03:29 PM	#39
brian69longbed Registered User Join Date: Nov 2008 Location: chino ca Posts: 215	Re: 71 C/10 First project. yeah since we're talking about bed carriage bolt removal... DON"T TRY TO HOLD THEM WITH YOUR FINGERS WHILE YOU RUN THE GUN! lets just say i found out the hard way. they get really sharp when they're all rusty ha ha __________________ 69' 1/2 ton LONGBED__ _______ \|__\__ \|__(O)______(O)] My build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=354115

09-21-2009, 10:20 AM	#41
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. Here are some pics of welding in the rear corner section of the bedside. Hoping to get the inside of the bedside welded in tonight. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153

09-21-2009, 11:38 AM	#42
foosed Registered User Join Date: Aug 2008 Location: Huron, sd Posts: 463	Re: 71 C/10 First project. great job, but dang, thats alot of work for some bedsides! __________________ 1970 c/10 swb (show truck) 1972 custom/10 deluxe 4x4 (restoration pending) 2011 silverado ecsb z71 (daily driver)

10-30-2009, 11:08 AM	#44
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. Still working on the bed but I installed my new shocks last night. The bed will soon be in primer and hopefully it will stay warm enough to paint. Its been in the 60s the last few weeks here in pa. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153

11-19-2009, 09:54 AM	#45
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. New rims! American Racing 202S (Daisy). The guy I bought them from had them on his 72 C/10 20 years ago and had them in his barn since then. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153

11-19-2009, 09:55 AM	#46
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. Pics Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153



Register or Log In To remove these advertisements.

11-19-2009, 09:56 AM	#47
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. Last pic Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153

11-19-2009, 09:58 AM	#48
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 71 C/10 First project. Anyone know where I can get some cheap center caps? The local wheel shop wants $70 for the set. Seems a little pricey. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153

03-12-2010, 07:24 PM	#49
ChiefThinElk Registered User Join Date: Dec 2006 Location: Texas Posts: 22	Re: 71 C/10 First project. Sweeeet! Keep the pics coming!

04-27-2010, 02:22 PM	#50
Switch163 Registered User Join Date: Sep 2009 Location: Evansville, Indiana Posts: 31	Re: 71 C/10 First project. wow great truck... Paint looks good lot of work on that bed though.. __________________ - does not need motivation, only money -

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.