PA Leftover parts: Cab, K30 frame, core supports, etc...

[K30_dump]

Hello all,

Need to buy a few ton of coal soon, looking to clean out some project leftovers:

NIB Energy suspension body mount sets - Have '73-80 and '81-87, one of each in black. $60 for '73-80, $75 for '81-87 obo.

NIB Milemarker hubs - External (bolt-on), for early 3/4 ton Dana 44 axles. $85

'84 core support - Solid, very little (if any) rust. $100 obo.

'73-80 core support - Very solid, no rust. $100 obo.

Brand new 25 gallon Blazer (or rear mount pickup) gas tank. $100

I'm sure there's more, that's all for now. Some of this stuff I had no idea what to list for, so make offers. Will make package deals as well if someone makes a trip .

Most items local pickup in central PA, near Williamsport. Would ship the body mounts or hubs, that's about it .

Can get pics of anything if interested, working right now .

Thanks,

Joe
Posted via Mobile Device

[GM72K10]

So did you ever get a K30 dump together?

[K30_dump]

Originally Posted by GM72K10

So did you ever get a K30 dump together?

Gerry,

No, sadly I did not .

Came upon an '01 C3500HD chassis last summer that was thought to have a bad engine (6.5 TD), as it was run low on oil. Truck was immaculate, owned by a roofing company with only 87k miles. Bed was missing, otherwise complete. Bought the truck for $250 and drove it home, never needing an engine. Located a 10' Iroquois dump body (with telescopic cylinder) and installed it last fall.

Not sure if you're familiar with the 3500HD line, but they had a GVW of 15K, Dana 80 rear (10 lug) with 19.5" wheels, and solid I-beam front axle. Not 4wd, but a very heavy beast. More of a 4500 or 5500 series than a 3500 .

Anyway, hated to give up on the dream. Really wanted a K30, this was (in many ways) more practical though...

Joe
Posted via Mobile Device

[GM72K10]

Sorry to hear that. I use a 2012 K3500HD as my work truck. Nice to have "new" dependable stuff. The K30 dump I have is a "as needed" truck, nice but wouldn't want to drive it everyday. Good Luck.

[qksilver]

I would be interested in the core support depending on pix. As far as shipping, if you could just wrap it really good and give me a weight I can email you a sticker to put on it and get FEDex to deliver. Also depending on what shipping would cost. NP problem if you don't want to sip, this is a would be nice if it is really clean but not a need.

Thanks,
Steve

[K30_dump]

Originally Posted by qksilver

I would be interested in the core support depending on pix. As far as shipping, if you could just wrap it really good and give me a weight I can email you a sticker to put on it and get FEDex to deliver. Also depending on what shipping would cost. NP problem if you don't want to sip, this is a would be nice if it is really clean but not a need.

Thanks,
Steve

Steve,

I'll get some pics tomorrow. Are you interested in the '73-80 support or the '81-87 unit?

If you send the label and such, I could work something out. Worst part will probably be driving it to FedEx (20 miles or so), but they may be able to pickup .

Thanks,

Joe
Posted via Mobile Device

[qksilver]

sorry, the 73-80 one............scjkovach@gmail.com

Thanks,
Steve

[K30_dump]

Originally Posted by qksilver

sorry, the 73-80 one............scjkovach@gmail.com

Thanks,
Steve

Pics sent yo your email.

Thanks,

Joe

[qksilver]

Thanks, looks good but depends on shipping. I found one local but have to pull it myself , after i pull the truck out of the woods for the guy. Too much work...............

steve

[bdiamond]

I think I'll take the 81-87 body mounts. Do you have a part number?

[K30_dump]

Originally Posted by bdiamond

I think I'll take the 81-87 body mounts. Do you have a part number?

I can surely get you one . Working right now, I'll try to check when I get home (before I head to bed )...

Thanks,

Joe
Posted via Mobile Device

[K30_dump]

Originally Posted by qksilver

Thanks, looks good but depends on shipping. I found one local but have to pull it myself , after i pull the truck out of the woods for the guy. Too much work...............

steve

Steve,

Will try to weight it tomorrow. Working again tonight, just got home and heading to bed ...

Originally Posted by bdiamond

I think I'll take the 81-87 body mounts. Do you have a part number?

Part number 3.4116G. Here is a pic:



Let me know, thanks

Joe

[bdiamond]

Sorry, for some reason I thought they were for a Suburban.

[DirtRocket8x]

I need the front core support bracket/ spring hangers
Posted via Mobile Device

[K30_dump]

Originally Posted by DirtRocket8x

I need the front core support bracket/ spring hangers
Posted via Mobile Device

May have a set from a '79 K20 frame, not sure if the tops are rusted out or not. Don't really want to cut them off of the K30 frame, as its complete. I believe they were the same from K10-K30 though, so they should work...

Let me know if you're interested and I'll check on them tomorrow.

Thanks,

Joe
Posted via Mobile Device

[frog210]

sorry i dont know if im reading this right or not
are you tring to sell the cab complete or are you willing to cut it up for sheetmetal?

[K30_dump]

Originally Posted by frog210

sorry i dont know if im reading this right or not
are you tring to sell the cab complete or are you willing to cut it up for sheetmetal?

Selling complete

Joe
Posted via Mobile Device

[DirtRocket8x]

Yes I'm intrested pending price and shopping to 75042 as long as there the same as a k30
Posted via Mobile Device

[K30_dump]

Originally Posted by qksilver

Thanks, looks good but depends on shipping. I found one local but have to pull it myself , after i pull the truck out of the woods for the guy. Too much work...............

steve

Steve,

Sorry for the delay .

Weighed the core support today. Weight is approx 65-70 lbs and dimensions are roughly 6' long X 2' high X 1' deep...

Let me know if the shipping is something you want to do. Would be coming from 17740 .

Thanks,

Joe

[K30_dump]

Originally Posted by DirtRocket8x

Yes I'm intrested pending price and shopping to 75042 as long as there the same as a k30
Posted via Mobile Device

PM sent...

Joe

[qksilver]

I checked into it, the shipping is the killer. Great price for the core though. I did find a 75 truck local that has a great front end, but I have to buy the whole truck. I am tired of stripping trucks.........on well, I tried. Thanks for checking the weight for me. I am going to pass.

Have a good Thanksgiving,
Steve

[K30_dump]

Make offers guys, need money for Christmas .

Joe

[GM72K10]

Tough economy we're in, I'll pass the word.

[K30_dump]

Bump

Joe
Posted via Mobile Device

[Marshy]

Is the K30 frame still available? Where in PA are you? Got any pictures? Thanks!
Posted via Mobile Device