![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Feb 2014
Location: wainfleet ont
Posts: 8
|
should i mount ford f-150 long travel suspension?
hey there im having quite the hard time trying to find/fab a long travel ibeam setup on my 81 c10 2wd.so should I just copy a ford f-150 ibeam kit and put that on? or do anyone of you guys got an idea or some input that would be vary helpful thanks.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2012
Location: Temple City
Posts: 3,586
|
Re: should i mount ford f-150 long travel suspension?
I have a 66 F100 that is in project status, and from the experience of I-beams to CV front end. I would say if you really want Long travel I beams get a Ford. Yes you can make them work, but the frame widths are extremely different.
I had a C20 cross member for a couple of weeks when I first got started on my F100 with the idea of making it fit. The Fords wide frame will practically slide over the Chevy frame, and you will effectively have a Z in the frame when connected. If my memory is correct you would have to shave the frame rails of the Ford about a 1/2 total to get it over the GM rails. If you do this you will not want to run the early forged I beams due to them being rear steer, and you would have to mod you column to adapt along with wiring. I would run the later beams post 87, and gain front steer which gives you the ease of hook up. Or you could try to find a clip from a E150. They are front steer, but rather or not the have support for long travel suspension I do not know. Either way I would use the 3/4 ton version, and get the camper special brakes. This way you have the factory big brake option. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2014
Location: wainfleet ont
Posts: 8
|
Re: should i mount ford f-150 long travel suspension?
ford frame rails are only like 3in wider.and my truck is 2wd and I want to make my own ibeams or use a aftermarket ford kit. but can you explain a little bit more
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2012
Location: Temple City
Posts: 3,586
|
Re: should i mount ford f-150 long travel suspension?
I was not aware of aftermarket kits to put I-beams on trucks.
Personally while I like F250's for pre-running I just don't think I would spend a bunch of money to do it to a Chevy. Its your truck, and it can be a nice set-up. |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Oct 2006
Location: Southern Kalifornia
Posts: 3,066
|
Re: should i mount ford f-150 long travel suspension?
You can also do a "Swing Set" steering set up. Check out Race Desert....LOTS of good info there. Ziegelsteinfaust gave you some good info as well. For lifted(bent) I-Beams, check out Auto-Fab. YES it's a LOT of work, but can be done....$$$$$$$
__________________
------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2014
Location: wainfleet ont
Posts: 8
|
Re: should i mount ford f-150 long travel suspension?
yeah that's what I was going to do was a swing set steering and I cant register to race desert for some reason.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|