PA floor boards, bed floor, fire wall, rocker box

[1rippen6]

ttt

[1rippen6]

ttt

[1rippen6]

plenty of bedfloor and rocker box available

[1rippen6]

ttt

[1rippen6]

ttt

[Mr Banshee]

1rippen6, I need a full width section of the bed floor, do you have anything still available? Thanks Mike

[1rippen6]

I will look but I just throw most of my floor boards away last weekend.

[1rippen6]

Here is the only thing I have left nothing full width let me know if anything will work

[1rippen6]

can get better pictures if needed

[Mr Banshee]

Thanks for checking. looking for something width. If I can't find anything else I'll get back with you.

[squirrels]

I know this is old but, would you have a 22"x40" section of floor left. 40" from right to left, have a bad section in mine and the floor repair section i got doesn't match rib width at all. thanks Ryan, I'm in IL

[1rippen6]

Originally Posted by squirrels

I know this is old but, would you have a 22"x40" section of floor left. 40" from right to left, have a bad section in mine and the floor repair section i got doesn't match rib width at all. thanks Ryan, I'm in IL

I still have the piece in post 33 bottom photo it is was cut with a torque the spot I measured was 39 3/4. It could be tappered wider or small or on a taper but I could get a 22 in. piece out of it. Just want to make sure you don't end up with a piece you can't use. I will take a better look at it tomorrow and use the ribs to see how straight it is. 40 plus shipping if interested.