The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-12-2015, 07:01 PM   #1
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
4x4 3/4T Hubcap Conversion Service-

I will cut & shape & finish the centers of your 2WD 3/4T hubcaps and make them into correct 4x4 caps. 4x4 caps are expensive/2WD caps are cheap!
Send me your caps and I will convert them and return them to you for:
$150 pr

These are done with hydraulic dye cutters and special made shaping molds...to guarantee the correct uniform round shape & roll...not with a saw & a hammer!

Here is a set I just finished for Mike Cofield, on his caps.

Attached Images
  
__________________
Email: frankeham@comcast.net
Phone: 360-956-7170
PICKMUP is offline   Reply With Quote
Old 08-12-2015, 08:23 PM   #2
chewychevy67
Senior Member
 
Join Date: Jan 2010
Location: Here
Posts: 5,551
Re: 4x4 3/4T Hubcap Conversion Service-

Can you do this on 67 68 caps?
chewychevy67 is offline   Reply With Quote
Old 08-13-2015, 07:16 AM   #3
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: 4x4 3/4T Hubcap Conversion Service-

Frank, I'm glad to hear you have opened up to doing "our" caps sent to you. This is a great service to have available. You'll be hearing from me in the future
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 08-13-2015, 07:36 AM   #4
sambrutay
Registered User
 
sambrutay's Avatar
 
Join Date: Dec 2010
Location: Louisville KY
Posts: 622
Re: 4x4 3/4T Hubcap Conversion Service-

Looks great!
__________________
Bruce

1964 C10 SWB #Junk
1979 C10 utility #cargopants (sold)
1971 GMC Sprint (sold)
1974 GMC Grande Sierra (sold)
sambrutay is offline   Reply With Quote
Old 03-20-2016, 05:21 PM   #5
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
Re: 4x4 3/4T Hubcap Conversion Service-

ttt
__________________
Email: frankeham@comcast.net
Phone: 360-956-7170
PICKMUP is offline   Reply With Quote
Old 03-20-2016, 05:59 PM   #6
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,446
Re: 4x4 3/4T Hubcap Conversion Service-

Frank can you do this to SS, chrome or both? Cost include return shipping? Thanks, Pete
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 03-21-2016, 12:06 PM   #7
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
Re: 4x4 3/4T Hubcap Conversion Service-

Quote:
Originally Posted by DeadheadNM View Post
Frank can you do this to SS, chrome or both? Cost include return shipping? Thanks, Pete
Stainless...they come out perfect! The chrome over tin/brass splits & cracks and the chrome peals off. That does include return shipping (in your box), so send them in a good box. Thanks, Frank
__________________
Email: frankeham@comcast.net
Phone: 360-956-7170
PICKMUP is offline   Reply With Quote
Old 03-21-2016, 07:57 PM   #8
Undone
Registered User
 
Join Date: Aug 2010
Location: commerce ga
Posts: 896
Re: 4x4 3/4T Hubcap Conversion Service-

Quote:
Originally Posted by PICKMUP View Post
Stainless...they come out perfect! The chrome over tin/brass splits & cracks and the chrome peals off. That does include return shipping (in your box), so send them in a good box. Thanks, Frank
Those look Great.
Undone is offline   Reply With Quote
Old 03-22-2016, 02:52 PM   #9
Cali72K20
Senior Member
 
Cali72K20's Avatar
 
Join Date: Aug 2013
Location: Northern Santa Barbara County, California
Posts: 2,706
Re: 4x4 3/4T Hubcap Conversion Service-

PM sent, thanks!

casey
Cali72K20 is offline   Reply With Quote
Old 03-31-2016, 07:15 AM   #10
52napco
Registered User
 
Join Date: Jun 2014
Location: upstate sc
Posts: 2,095
Re: 4x4 3/4T Hubcap Conversion Service-

Frank do you have any 3/4 4x4 caps for sale ??? The last set i bought from you looked great
thanks
52napco is offline   Reply With Quote
Old 03-31-2016, 01:54 PM   #11
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
Re: 4x4 3/4T Hubcap Conversion Service-

Quote:
Originally Posted by 52napco View Post
Frank do you have any 3/4 4x4 caps for sale ??? The last set i bought from you looked great
thanks
Grade #1---Like NEW (the best I ever get):
Two front 4x4 caps = $300 + $25 S/H/INS
Full set 4x4 caps = $500 + $25 S/H/INS

Grade #2 ( a few little dings & things-no dents or splits)
Two front 4x4 caps = $250 + $25 S/H/INS
Full set of 4x4 caps = $400+ $25 S/H/INS

__________________
Email: frankeham@comcast.net
Phone: 360-956-7170

Last edited by PICKMUP; 02-01-2017 at 02:24 PM.
PICKMUP is offline   Reply With Quote
Old 03-31-2016, 08:52 PM   #12
Eagle9502
Senior Member
 
Join Date: Dec 2015
Location: Brooklet, Georgia
Posts: 838
Re: 4x4 3/4T Hubcap Conversion Service-

Frank, any luck on GMC 3/4 ton caps?
Eagle9502 is offline   Reply With Quote
Old 04-25-2016, 05:14 PM   #13
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
Re: 4x4 3/4T Hubcap Conversion Service-

Quote:
Originally Posted by Eagle9502 View Post
Frank, any luck on GMC 3/4 ton caps?
I have a set all prepped and will finish the polishing by the end of the week. These will be polished more than normally, because there were scratches that I had to remove. They are stainless, and the centers are shaped out like the 69-72, to clear the deep rear hubs. They will look more like the original chrome caps, because of the extra polishing. All the paint was removed...and you know I do not repaint. I just do the metal work.
$400 + $25 S/H/INS

If Eagle9502 passes, they will be open to all.
Thanks, Frank
Attached Images
 
__________________
Email: frankeham@comcast.net
Phone: 360-956-7170
PICKMUP is offline   Reply With Quote
Old 04-25-2016, 06:37 PM   #14
Cali72K20
Senior Member
 
Cali72K20's Avatar
 
Join Date: Aug 2013
Location: Northern Santa Barbara County, California
Posts: 2,706
Re: 4x4 3/4T Hubcap Conversion Service-

Thank you Frank, the caps are perfect!!!
Cali72K20 is offline   Reply With Quote
Old 04-25-2016, 09:47 PM   #15
cjmorr13
Registered User
 
cjmorr13's Avatar
 
Join Date: Feb 2016
Location: Midland, TX
Posts: 84
Re: 4x4 3/4T Hubcap Conversion Service-

Frank, perfect timing! Sent PM for a set. Thanks!
cjmorr13 is offline   Reply With Quote
Old 04-25-2016, 10:38 PM   #16
Eagle9502
Senior Member
 
Join Date: Dec 2015
Location: Brooklet, Georgia
Posts: 838
Re: 4x4 3/4T Hubcap Conversion Service-

Frank, sent you a PM with a question. I'll take them pending answer.

Last edited by Eagle9502; 04-25-2016 at 10:50 PM.
Eagle9502 is offline   Reply With Quote
Old 04-28-2016, 09:27 AM   #17
duallyjams
Registered User
 
duallyjams's Avatar
 
Join Date: May 2007
Location: Deale Md
Posts: 4,663
Re: 4x4 3/4T Hubcap Conversion Service-

What are the years that you can do ?
__________________
James

63 GMC V6 4speed carryall
65 chevy swb bbw V8 auto
68 K20 327/4 speed, buddy buckets
2002 GMC CC Dually Duramax

64 GMC lwb 3/4 V6 4speed SOLD
66 GMC swb bbw buddy buckets SOLD

IG duallyjams

The only thing that stays the same is constant change!
duallyjams is offline   Reply With Quote
Old 04-28-2016, 11:20 AM   #18
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
Re: 4x4 3/4T Hubcap Conversion Service-

Quote:
Originally Posted by duallyjams View Post
What are the years that you can do ?
Only those in pics above...69-75
__________________
Email: frankeham@comcast.net
Phone: 360-956-7170
PICKMUP is offline   Reply With Quote
Old 08-18-2016, 04:32 PM   #19
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
Re: 4x4 3/4T Hubcap Conversion Service-

Pics for 72Cheyene454:
Your 3/4T caps are done.
Here are the 1/2 T GMC caps you asked about.
Thanks, Frank
Attached Images
    
__________________
Email: frankeham@comcast.net
Phone: 360-956-7170
PICKMUP is offline   Reply With Quote
Old 08-18-2016, 11:28 PM   #20
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: 4x4 3/4T Hubcap Conversion Service-

Hey Frankmup, refresh my memory. Do you restore dinged stainless caps? I have some such candidates.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 08-19-2016, 10:41 AM   #21
72Cheyenne454
Registered User
 
72Cheyenne454's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 457
Re: 4x4 3/4T Hubcap Conversion Service-

Thank you Frank, my caps look great!

Sending you a PM. Here's some pics for you...

Miles

Quote:
Originally Posted by PICKMUP View Post
Pics for 72Cheyene454:
Your 3/4T caps are done.
Here are the 1/2 T GMC caps you asked about.
Thanks, Frank
Attached Images
     
72Cheyenne454 is offline   Reply With Quote
Old 08-19-2016, 04:59 PM   #22
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
Re: 4x4 3/4T Hubcap Conversion Service-

Quote:
Originally Posted by special-K View Post
Hey Frankmup, refresh my memory. Do you restore dinged stainless caps? I have some such candidates.
No. Sorry, I only do these 3/4T 4x4 "stainless" front cap conversions.
__________________
Email: frankeham@comcast.net
Phone: 360-956-7170

Last edited by PICKMUP; 02-01-2017 at 02:27 PM.
PICKMUP is offline   Reply With Quote
Old 11-02-2016, 10:01 PM   #23
jondancer
Registered User
 
Join Date: Jul 2010
Location: central michigan
Posts: 1,194
Re: 4x4 3/4T Hubcap Conversion Service-

So the price is to punch the center out of the front two hubcaps ? I need gmc caps but would Chevy caps work and look the same after the center is punched out?
Thanks
jondancer is offline   Reply With Quote
Old 11-03-2016, 11:36 AM   #24
PICKMUP
"Trucks with Class"
 
PICKMUP's Avatar
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
Re: 4x4 3/4T Hubcap Conversion Service-

Quote:
Originally Posted by jondancer View Post
So the price is to punch the center out of the front two hubcaps ? I need gmc caps but would Chevy caps work and look the same after the center is punched out?
Thanks
Yes, Chevy & GMC caps look the same after cutting & shaping. Try to send matching pairs. Just look at them closely. There are two slightly different stampings, but of course you can't tell when they are on different sides of the truck.
__________________
Email: frankeham@comcast.net
Phone: 360-956-7170
PICKMUP is offline   Reply With Quote
Old 11-03-2016, 11:57 PM   #25
rgreathouse
Registered User
 
Join Date: Dec 2004
Location: jackson,ca
Posts: 494
Re: 4x4 3/4T Hubcap Conversion Service-

Any more 3/4 4x4 complete Chevy sets available. Grade 1 or close?
__________________
1972 c10,2wd,long bed,250,4spd---->
1972 SWB Fleetside 4x4 12v Cummins build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=513791
rgreathouse is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com